, provides an expanding selection of research monographs in all major areas of optics: lasers and quantum optics, ultrafast phenomena, optical spectroscopy techniques, optoelectronics, quantum information, information optics, applied laser technology, industrial applications, and other topics of contemporary interest. With this broad coverage of topics, the series is of use to all research scientists and engineers who need up-to-date reference books.
A novel method to measure the refractive index n in the near-infrared by simple extensions to a standard Abbe refractometer is described. A technique is derived to correct for the dispersion of the glass prism and experimental results of refractive-index measurements at λ = 830 nm are compared with published data. These results prove the suitability of the described method, the accuracy being comparable to that of an Abbe refractometer used in the visible range; that is, the refractive index n can be measured to an accuracy of ±10 −4 . Finally, new refractive-index data at 830 nm are given for methanol, water, acetone, ethanol, cyclohexane, glycol, di-2-ethyl hexyl-sabacate (DEHS), carbon tetrachloride, glycerol, toluene, ethyl salicylate, methyl salicylate and cinnamaldehyde at 20 and 25 • C.
Flame spray pyrolysis is an established technique for synthesizing nanoparticles in the gas phase through aerosol combustion of precursor/solvent droplets. The combustion characteristics of isolated micron-sized precursor/solvent droplets are investigated experimentally. Pure solvent droplets burn uniformly and classically quasisteady, whereas precursor/ solvent droplets manifest disruptive combustion behavior. The fast onset of droplet disruption, which occurs only for solutions with dissolved metal precursors, is not due to solid-particle precipitation within the droplet. Instead, the mechanism of disruptive droplet burning is similar to that of slurry droplets, consisting of three main steps: (1) diffusioncontrolled burning of the high-volatile solvent, (2) viscous-shell formation due to decomposition of the low-volatile metal precursor, and (3) subsequent disruption due to heterogeneous nucleation. The time sequence of the three steps depends on the concentration and decomposition characteristics of the metal precursor, shortening with increased concentration and higher incremental decomposition temperature.
One of the most versatile and rapid manufacturing processes for a variety of nanopowders is flame spray pyrolysis (FSP). The production costs of this scalable process are largely controlled by the raw materials, pushing for the utilization of lowcost metal precursors. These, however, typically yield inhomogeneous products containing large particles up to micrometer size along with fine nanoparticles. Here, the release mechanism of nitrate and carboxylate precursors from spray droplets has been investigated by single-droplet combustion experiments and thermogravimetric analysis. The results show that neither precursor evaporation nor choice of solvents is prerequisite for homogeneous nanopowders but droplet microexplosions with continuing combustion. It is shown that even low-cost metal nitrates yield homogeneous nanopowders if precursors are formulated such that droplet microexplosions occur by internal superheating. The proposed precursor release mechanisms are verified with lab-and pilot-scale FSP, demonstrating that single-droplet combustion experiments can be employed to predict the product quality.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.