Global Navigation Satellite System (GNSS) Radio Occultation (RO) has provided high-quality atmospheric data assimilated in Numerical Weather Prediction (NWP) models and climatology studies for more than 20 years. In the satellite–satellite GNSS-RO geometry, the measurements are susceptible to ionospheric scintillation depending on the solar and geomagnetic activity, seasons, geographical location and local time. This study investigates the application of the Support Vector Machine (SVM) algorithm in developing an automatic detection model of F-layer scintillation in GNSS-RO measurements using power spectral density (PSD). The model is intended for future analyses on the influence of space weather and solar activity on RO data products over long time periods. A novel data set of occultations is used to train the SVM algorithm. The data set is composed of events at low latitudes on 15–20 March 2015 (St. Patrick’s Day geomagnetic storm, high solar flux) and 14–19 May 2018 (quiet period, low solar flux). A few conditional criteria were first applied to a total of 5340 occultations to define a set of 858 scintillation candidates. Models were trained with scintillation indices and PSDs as training features and were either linear or Gaussian kernel. The investigations also show that besides the intensity PSD, the (excess) phase PSD has a positive contribution in increasing the detection of true positives.
Abstract. It is well-known that in the presence of superrefractive layers in the lower-tropospheric inversion of GNSS radio occultation (RO) measurements using the Abel transform yields biased refractivity profiles. As such it is problematic to reconstruct the true refractivity from the RO signal. Additional information about this lower region of the atmosphere might be embedded in reflected parts of the signal. To retrieve the bending angle, the phase matching operator can be used. This operator produces a complex function of the impact parameter, and from its phase we can calculate the bending angle. Instead of looking at the phase, in this paper we focus on the function's amplitude. The results in this paper show that the signatures of surface reflections in GNSS RO measurements can be significantly enhanced when using the phase matching method by processing only an appropriately selected segment of the received signal. This signature enhancement is demonstrated by simulations and confirmed with 10 hand-picked MetOp-A occultations with reflected components. To validate that these events show signs of reflections, radio holographic images are generated. Our results suggest that the phase matching amplitude carries information that can improve the interpretation of radio occultation measurements in the lower troposphere.
Like any other system relying on transionospheric propagation, Global Navigation Satellite System (GNSS) Radio Occultation (GNSS‐RO) is affected by ionospheric conditions during measurements. Regions of plasma irregularities in F region create abrupt gradients in the distribution of ionized particles. Radio signals propagated through such regions suffer from constructive and destructive contributions in phase and amplitude, known as scintillations. Different approaches have been proposed in order to model and reproduce the wave propagation through ionospheric irregularities. We present simulations considering single‐slope power law model of irregularities integrated with Multiple Phase Screen (MPS) propagation. In this work, the capability of the scintillation model to reproduce features in low‐latitude MetOp measurements in the early hours of DOY 76, 2015 is evaluated. Power spectral density (PSD) analysis, scintillation index, decorrelation time, and standard deviation of neutral bending angle are considered in the comparison between the simulations and RO measurements. The results demonstrate the capability of the simulator to replicate an equivalent error contribution to the neutral bending angle measurement in cases of moderate to strong scintillation.
Global Navigation Satellite System Radio Occultation (GNSS-RO) is an important technique used to sound the Earth's atmosphere and provide data products to numerical weather prediction (NWP) systems as well as to climate research. It provides a high vertical resolution and SI-traceability that are both valuable complements to other Earth observation systems. In addition to direct components refracted in the atmosphere, many received RO signals contain reflected components thanks to the specular and relatively smooth characteristics of the ocean. These reflected components can interfere the retrieval of the direct part of the signal, and can also contain meteorological information of their own, e.g., information about the refractivity at the Earth's surface. While the conventional method to detect such reflections is by using radio-holographic methods, it has been shown that it is possible to see reflections using wave optics inversion, specifically while inspecting the amplitude of the output of phase matching (PM). The primary objective of this paper is to analyze the appearance of these reflections in the amplitude output from another wave optics algorithm, namely the much faster full spectrum inversion (FSI). PM and FSI are closely related algorithms-they both use the method of stationary phase to derive the bending angle from a measured signal. We apply our own implementation of FSI to the same GNSS-RO measurements that PM was previously applied to and show that the amplitudes of the outputs again indicate reflection in the surface of the ocean. Our results show that the amplitudes output from the FSI and PM algorithms are practically identical and that the reflection signatures thus appear equally well.
Abstract. It is well-known that in the presence of super-refractive (SR) layers in the lower troposphere inversion of GNSS radio occultation (RO) measurements using the Abel transform yields biased refractivity profiles. As such it is problematic to reconstruct the true refractivity from the RO signal. Additional information about this lower region of the atmosphere might be embedded in reflected parts of the signal. To retrieve the bending angle, the phase matching operator can be used. This operator produces a complex function of the impact parameter, and from its phase we can calculate the bending angle. Instead of looking at the phase, in this paper we focus on the function's amplitude. The results in this paper show that the signatures of surface reflections in GNSS RO measurements can be significantly enhanced when using the phase matching method by processing only an appropriately selected segment of the received signal. We can then identify reflection signatures even in cases where they are normally obscured by the direct signal's influence on the phase matching amplitude. This signature enhancement is demonstrated by simulations and confirmed with real MetOp-A data.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.