Adjustable-length loop devices may need to be retensioned after cycling the knee and fixing the tibial side to account for the increased initial displacement seen with these devices.

The menisci should be repaired if at all possible, especially in the setting of anterior cruciate ligament reconstruction, for optimal functional outcome and patient satisfaction.

This study is a Level 4 study describing youth pitching biomechanics and how they relate to possible injuries.

The findings of this study enhance the understanding of valgus restraint in throwing athletes and provide insight into the difference in nonoperative outcomes between proximal and distal tears of the UCL.

The results of the current study demonstrate that IM and plate devices provide similar repair strength for middle-third clavicle fractures. However, testing of the hardware removal groups found the IM device removal group to be significantly stronger than the plate removal group.

No abstract

Background: Limited biomechanical data exist for dual small plate fixation of midshaft clavicle fractures, and no prior study has concurrently compared dual small plating to larger superior or anteroinferior single plate and screw constructs. Purpose: To biomechanically compare dual small orthogonal plating, superior plating, and anteroinferior plating of midshaft clavicle fractures by use of a cadaveric model. Study Design: Descriptive laboratory study. Methods: The study used 18 cadaveric clavicle specimens (9 pairs total), and 3 plating techniques were studied: anteroinferior, superior, and dual. The dual plating technique used smaller diameter plates and screws (1.6-mm thickness) than the other, single plate techniques (3.3-mm thickness). Each of the 9 clavicle pairs was randomly assigned a combination of 2 plating techniques, and randomization was used to determine which techniques were used for the right and left specimens. Clavicles were plated and then osteotomized to create an inferior butterfly fracture model, which was then fixed with a single interfragmentary screw. Clavicle specimens were then potted for mechanical testing. Initial bending, axial, and torsional stiffness of each construct was determined through use of a randomized nondestructive cyclic testing protocol followed by load to failure. Results: No significant differences were found in cyclical axial ( P = .667) or torsional ( P = .526) stiffness between plating groups. Anteroinferior plating demonstrated significantly higher cyclical bending stiffness than superior plating ( P = .005). No significant difference was found in bending stiffness between dual plating and either anteroinferior ( P = .129) or superior plating ( P = .067). No significant difference was noted in load to failure among plating methods ( P = .353). Conclusion: Dual plating with a smaller plate-screw construct is biomechanically similar to superior and anteroinferior single plate fixation that uses larger plate-screw constructs. No significant differences were found between dual plating and either superior or anteroinferior single plating in axial, bending, or torsional stiffness or in bending load to failure. Dual small plating is a viable option for fixing midshaft clavicle fractures and may be a useful low-profile technique that avoids a larger and more prominent plate-screw construct. Clinical Relevance: Plate prominence and hardware irritation are commonly reported complaints and reasons for revision surgery after plate fixation of midshaft clavicle fractures. Dual small plate fixation has been used to improve cosmetic acceptability, minimize hardware irritation, and decrease reoperation rate. Biomechanically, dual small plate fixation performed similarly to larger single plate fixation in this cadaveric model of butterfly fracture.

Clinicians may feel comfortable in using any of the 3 tests, depending on the patient, to isolate the function of the subscapularis as a single muscle. Furthermore, clinicians should not solely focus on a patient's arm position when administering an examination but also compare the affected arm to the contralateral shoulder when appropriate.