The virtual validation of automated driving functions requires meaningful simulation models of environment perception sensors such as radar, lidar, and cameras. There does not yet exist an unrivaled standard for perception sensor models, and radar especially lacks modeling approaches that consistently produce realistic results. In this paper, we present measurements that exemplify challenges in the development of meaningful radar sensor models. We highlight three major challenges: multi-path propagation, separability, and sensitivity of radar cross section to the aspect angle. We also review previous work addressing these challenges and suggest further research directions towards meaningful automotive radar simulation models.
Simulation-based testing is seen as a major requirement for the safety validation of highly automated driving. One crucial part of such test architectures are models of environment perception sensors such as camera, lidar and radar sensors. Currently, an objective evaluation and the comparison of different modeling approaches for automotive lidar sensors are still a challenge. In this work, a real lidar sensor system used for object recognition is first functionally decomposed. The resulting sequence of processing blocks and interfaces is then mapped onto simulation methods. Subsequently, metrics applied to the aforementioned interfaces are derived, enabling a quantitative comparison between simulated and real sensor data at different steps of the processing pipeline. Benchmarks for several existing sensor models at a concrete selected interface are performed using those metrics by comparing them to measurements gained from the real sensor. Finally, we outline how metrics on low-level interfaces can correlate with results on more abstract ones. A major achievement of this work lies within the commonly accepted interfaces and a common understanding of real and virtual lidar sensor systems and, even more important, an initial guideline for the quantitative comparison of sensor models with the ambition to support future validation of virtual sensor models.
Diffusion of electric and hybrid vehicles is accelerating the development of innovative braking technologies. Calibration of accurate models of a hydraulic brake plant involves availability of large amount of data whose acquisition is expensive and time consuming. Also, for some applications, such as vehicle simulators and hardware in the loop test rig, a real-time implementation is required. To avoid excessive computational loads, usage of simplified parametric models is almost mandatory. In this work, authors propose a simplified functional approach to identify and simulate the response of a generic hydraulic plant with a limited number of experimental tests. To reproduce complex nonlinear behaviours that are difficult to be reproduced with simplified models, piecewise transfer functions with scheduled poles are proposed. This innovative solution has been successfully applied for the identification of the brake plant of an existing vehicle, a Siemens prototype of instrumented vehicle called SimRod, demonstrating the feasibility of proposed method.
This paper proposes the fast and accurate electro-thermal model of the existing Simrod three-phase inverter for an electric vehicle (EV) application. The research focuses on analytical and dynamic electro-thermal models of inverters that can be applied for multi-applications. The optimal design approach of passive filters is presented for the DC and AC sides of the inverter. The analytical model has been established, including a mathematical representation of the inverter and induction motor (IM). The high-fidelity electro-thermal simulation model of an inverter with integrated power loss and thermal model is established. The state-space thermal model (for the IRFS4115PbF device) has been created and incorporated into the MATLAB simulation. The simulation model is then validated with the PLECS software-based thermal model to confirm the accuracy. Indirect field-oriented control (IFOC) is designed for squirrel-cage IM at a maximum power rating of 45 kW and implemented on MATLAB/Simulink. The comparative analysis between the real and simulated results is performed to validate the simulation model at a specific speed, torque, and current. Furthermore, the electro-thermal simulation model has been validated with experimental data using efficiency and temperature comparison. The developed simulation model is beneficial for designing, optimizing, and developing advanced technology-based inverters to achieve higher efficiency at a particular operating range of temperature and power quality. The new European driving cycle (NEDC) speed profile simulation results are demonstrated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.