Thai Microelectronics Center fabricates micropillar sheets from soft lithography techniques and roll-to-roll process which were used as superhydrophobic and superoleophobic surfaces coated on marine structures and medical devices. This research aimed to study appropriate constitutive models and mechanical behaviours of PDMS micropillar sheets with two substrate thicknesses of 1,910 µm and 150 µm under compressive loading using ANSYS Mechanical APDL program. The constitutive models consisted of Mooney-Rivlin (2, 3 and 5 parameters), Ogden (1 st , 2 nd and 3 rd orders), Neo-Hookean, Polynomial (1 st and 2 nd orders), Arruda-Boyce, Gent and Yeoh (1 st , 2 nd and 3 rd orders) models were curved fitting with experiment data from uniaxial compression test. We found that the most accurate constitutive model was Mooney-Rivlin 5 parameter model for the low strain range ( 0.225) z . The compressive strength and the lateral collapse of micropillars depended on substrate thickness were studied. The lateral collapse of micropillars was found when the substrate thicknesses were 150 µm and 1,910 µm. As the substrate thickness decreased, the compressive strength decreased while the elastic stiffness increased. The maximum compressive forces per one micropillar were 21.060 µN and 18.549 µN for the 1,910 µm and 150 µm thick substrates respectively.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.