The R25 Reciproc instrument is able to reach the FWL of straight- and moderate-curved mandibular molar canals without a glide path in a large proportion of cases.

Objective:This study sought to assess the influence of cervical preflaring and reuse after resterilization, on fracture strength and plastic deformation and/or surface cracking in reciprocating nickel–titanium [NiTi] endodontic instruments after root canal instrumentation of extracted human teeth.Materials and Methods:Forty engine-driven reciprocating NiTi instruments (20 Reciproc® [RC], VDW; 20 WaveOne® [WO], Dentsply) were used in root canal instrumentation of extracted human molars. A total of 485 human upper molars with similar anatomical features were selected and randomly distributed across four groups according to the instrumentation procedures performed (G1 and G3: RC; G2 and G4: WO). Reciprocating instruments were used as per manufacturer instructions. In groups G3 and G4, cervical preflaring was performed prior to instrumentation. After each use of each instrument, sterilization was repeated and scanning electron microscope (SEM) images were obtained to check for plastic deformations and/or cracks on instrument surfaces. Each instrument was used repeatedly until fracture occurred.Results:Regardless of flaring, RC files exhibited greater fracture strength than WO instruments (P <0.01) with and without preflaring. Cervical preflaring significantly reduced the risk of instrument fracture (P <0.01). No plastic deformations were observed before fracturing. However, cracks were found on WO instruments shortly after their first use. RC and WO instruments resisted fracturing after autoclave sterilization.Conclusions:Cervical preflaring allowed a significant increase in the number of times RC and WO files could be reused safely.