The speed of quantum gates and measurements is a decisive factor for the overall fidelity of quantum protocols when performed on physical qubits with finite coherence time. Reducing the time required to distinguish qubit states with high fidelity is therefore a critical goal in quantum information science. The state-of-the-art readout of superconducting qubits is based on the dispersive interaction with a readout resonator. Here, we bring this technique to its current limit and demonstrate how the careful design of system parameters leads to fast and high-fidelity measurements without affecting qubit coherence. We achieve this result by increasing the dispersive interaction strength, by choosing an optimal linewidth of the readout resonator, by employing a Purcell filter, and by utilizing phase-sensitive parametric amplification. In our experiment, we measure 98.25% readout fidelity in only 48 ns, when minimizing read-out time, and 99.2% in 88 ns, when maximizing the fidelity, limited predominantly by the qubit lifetime of 7.6 µs. The presented scheme is also expected to be suitable for integration into a multiplexed readout architecture.

Sharing information coherently between nodes of a quantum network is fundamental to distributed quantum information processing. In this scheme, the computation is divided into subroutines and performed on several smaller quantum registers that are connected by classical and quantum channels . A direct quantum channel, which connects nodes deterministically rather than probabilistically, achieves larger entanglement rates between nodes and is advantageous for distributed fault-tolerant quantum computation . Here we implement deterministic state-transfer and entanglement protocols between two superconducting qubits fabricated on separate chips. Superconducting circuits constitute a universal quantum node that is capable of sending, receiving, storing and processing quantum information. Our implementation is based on an all-microwave cavity-assisted Raman process , which entangles or transfers the qubit state of a transmon-type artificial atom with a time-symmetric itinerant single photon. We transfer qubit states by absorbing these itinerant photons at the receiving node, with a probability of 98.1 ± 0.1 per cent, achieving a transfer-process fidelity of 80.02 ± 0.07 per cent for a protocol duration of only 180 nanoseconds. We also prepare remote entanglement on demand with a fidelity as high as 78.9 ± 0.1 per cent at a rate of 50 kilohertz. Our results are in excellent agreement with numerical simulations based on a master-equation description of the system. This deterministic protocol has the potential to be used for quantum computing distributed across different nodes of a cryogenic network.

The duration and fidelity of qubit readout is a critical factor for applications in quantum information processing as it limits the fidelity of algorithms which reuse qubits after measurement or apply feedback based on the measurement result. Here we present fast multiplexed readout of five qubits in a single 1.2 GHz wide readout channel. Using a readout pulse length of 80 ns and populating readout resonators for less than 250 ns we find an average correct assignment probability for the five measured qubits to be 97%. The differences between the individual readout errors and those found when measuring the qubits simultaneously are within 1%. We employ individual Purcell filters for each readout resonator to suppress off-resonant driving, which we characterize by the dephasing imposed on unintentionally measured qubits. We expect the here presented readout scheme to become particularly useful for the selective readout of individual qubits in multi-qubit quantum processors.

Active qubit reset is a key operation in many quantum algorithms, and particularly in quantum error correction. Here, we experimentally demonstrate a reset scheme for a three-level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the |f,0⟩ and |g,1⟩ states of the coupled transmon-resonator system, with |g⟩ and |f⟩ denoting the ground and second excited states of the transmon, and |0⟩ and |1⟩ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state in less than 500 ns and with 0.2% residual excitation. Our protocol is of practical interest as it has no additional architectural requirements beyond those needed for fast and efficient single-shot readout of transmons, and does not require feedback.

Single-photon detection is an essential component in many experiments in quantum optics, but it remains challenging in the microwave domain. We realize a quantum nondemolition detector for propagating microwave photons and characterize its performance using a single-photon source. To this aim, we implement a cavity-assisted conditional phase gate between the incoming photon and a superconducting artificial atom. By reading out the state of this atom in a single shot, we reach an external (internal) photon-detection fidelity of 50% (71%), limited by transmission efficiency between the source and the detector (75%) and the coherence properties of the qubit. By characterizing the coherence and average number of photons in the field reflected off the detector, we demonstrate its quantum nondemolition nature. We envisage applications in generating heralded remote entanglement between qubits and for realizing logic gates between propagating microwave photons. DOI: 10.1103/PhysRevX.8.021003 Subject Areas: Quantum Physics, Quantum InformationSingle-photon detectors [1] for itinerant fields are a key element in remote entanglement protocols [2], in linear optics quantum computation [3,4], and, in general, in characterizing correlation properties of radiation fields [5]. While such detectors are well established at optical frequencies, their microwave equivalents are still under development, partly because of the much lower photon energy in this frequency band [6]. At microwave frequencies, itinerant fields are typically recorded with linear detection schemes [7], analogous to optical homodyne detection. Such detection can now be realized with high efficiency by employing near-quantum-limited parametric amplifiers [8], and furthermore, it allows for a full tomographic characterization of radiation fields [9]. However, protocols such as entanglement heralding require the intrinsic nonlinearity of a single-photon detector in order to yield high-purity states despite losses between the source and the detector. Such a component has therefore raised interest in the community, leading to a variety of theoretical proposals [10][11][12][13][14][15][16][17][18][19][20], as well as initial experimental demonstrations, in the last decade [21][22][23][24][25][26][27].The first microwave photodetection experiment with superconducting circuits that did not require photons to be stored in high-quality factor cavities [21-23] was based on current biased Josephson junctions [24], but it was destructive and involved a long dead time. Later, systems involving absorption into artificial atoms (and thus destruction) of traveling photons [25,26] were implemented. Very recently, a quantum nondemolition (QND) detection scheme based on a photon-qubit entangling gate, similar in spirit to this work, was implemented using a strong dispersive shift in a 3D cavity [27]. Projective measurements of coherent input states into single-photon Fock states were realized in that work [27].Here, we demonstrate single-shot QND detection of itinerant single ph...