No abstract

A Grouped ActiNide EXtraction (GANEX) process for the extraction of actinides from used nuclear fuel for transmutation purposes has been investigated. The studied solvent consists of phenyl trifluoromethyl sulfone (FS-13), CyMe 4-BTBP, and TBP, a combination that has previously shown promising results. The time to reach extraction equilibrium for the system has been found to be less than 20 min. A 2:1 complex has been found between CyMe 4-BTBP and americium (III) or curium(III), whereas plutonium(IV) and CyMe 4-BTBP create a 1:1 complex. The extraction of fission product is low in the system.

No abstract

Studies have been performed with the purpose of determining the optimal solvent composition of a Chalmers grouped actinide extraction (CHALMEX) solvent for the selective coextraction of transuranic elements in a novel Grouped ActiNide EXtraction (GANEX) process. The solvent is composed of 6,6'-bis(5,5,8,8-tetramethyl-5,6,7,8-tetrahydro-benzo-[1,2,4]triazin-3-yl)-[2,2']-bipyridine (CyMe 4-BTBP) and tri-n-butyl phosphate (TBP) in phenyl trifluoromethyl sulfone (FS-13). The performance of the system has been shown to significantly depend on the ratios of the two extracting agents and the diluent to one another. Furthermore, the performance of the determined optimal solvent (10 mM CyMe 4-BTBP in 30% v/v TBP and 70% v/v FS-13) on various simulated PUREX raffinate solutions was tested. It was found that the solvent extracts all transuranic elements with high efficiency and good selectivity with regard to most other elements (fission products/activation products) present in the simulated PUREX raffinate solutions. Moreover, the solvent was found to extract a significant amount of acid. Palladium, silver, and cadmium were co-extracted along with the TRUradionuclides, which has also been observed in other similar CHALMEX systems. The extraction of plutonium and uranium was preserved for all tested simulated PUREX raffinate solutions compared to experiments using trace amounts.

The Chalmers Grouped ActiNide EXtraction process is a solvent extraction process for the homogeneous recycling of spent nuclear fuel. The use of TBP for the extraction of tetra- and hexavalent actinides can be problematic for several reasons, including troublesome degradation products causing crud formation, decreased extraction yield and the possibility of explosive red oil reactions. Here, the substitution of TBP by a N,N-dialkyl monoamide, DEHBA, is investigated. The findings suggest that DEHBA can be a suitable extracting agent for use in the CHALMEX solvent, although identified drawbacks need to be further investigated.