In the article an algorithm for calculating the continuous ion exchange column is proposed. By analogy with the calculation of the optimal phlegm number of the rectification column this algorithm takes into consideration depreciation charges for capital costs associated with the size of the column and working capital associated with the consumption of ionite and its regeneration. This algorithm can be used to calculate depreciation charges for capital costs related to column sizes and working capital regarded to ionite consumption and regeneration. Examples of ionite consumption calculation at typical and proposed algorithms of calculation and technological and geometric parameters used in column of water purification from sodium cations are given. Thus, in a typical calculation, when the water being purified from sodium cations moves in the ideal displacement mode and the excess of ionite is 1% of its minimum consumption. The optimal ionite consumption corresponding to the minimum of capital costs and working capital, which requires an increase in the ionite consumption by 5.6% of its minimum consumption. In this case the cost of ion exchange increases by 4.5%. It confirms the recommendations for industrial operation and design of ion exchange columns and increases the minimum ionite consumption by 1÷10%. The continuous ion exchange column was calculated including the longitudinal diffusion. Necessity of the further increase of the ionite consumption with regard to the longitudinal diffusion is shown. In the article an example of the ion exchange process calculation in comparison with the typical one, when the displacement mode for the treated water is ideal, is given. Similar equations for the dependences of the concentration of extracted ions in the purified solution and ionite granules are proposed if the equilibrium dependence is described by a linear equation. The working line is dependent on the concentration of the extracted ions in an ionite and on their concentration in the purified water, first, because of a jump in concentration at the inlet and a concave shape of the working line (the latter is usually a straight one in case of the mass-transfer processes) reduces the local and average driving forces of mass-transfer process significantly. It leads to increasing of the moving layer height of the ion exchanger in the column 2 times, and can lead to crossing the line of equilibrium by reducing the concentration jump at the entrance. Consequently, it is necessary to increase ionite consumption by more than 18% compared to its minimum consumption.
In the article possibility of water solution LiOH tertiary treatment from chlorine anions after electrolysis is viewed. Analyzing the existing purification methods, it is proposed to use the purification of lithium hydroxide in an ion exchange column. A mathematical model and a computational algorithm for ion exchange column having stationary and moving anionite layers AВ-17-08 in ОН-form are given. Relationships of the main parameters such as working cycle period, usage ratio of ionite exchange volume and specific ratio of solution being purified per 1 kg ionite for standard column have been received. The curves of the chlorine anions density in ionite depending on its layer height in the solution being purified in the middle and at the end of the working cycle period are given. In the article recommendations on prevention of ionite granules abrasion during the operation in ion exchange columns are given.
Background. Political and socio-economic transformations taking place in the modern world, an orientation of Russian education to humanization and democratization impose a number of requirements on a specialist professional training quality at a university. Particularly in the modern labor community there are requirements regarding the readiness of a future specialist to carry out interpersonal interaction in professional activity in a multicultural, multinational and multi-confessional society. For the higher professional education of the Russian Federation the task of training a specialist with the ability to interpersonal interaction in professional activities (including empathy and interethnic tolerance) is of prime importance. The purpose of the work is to describe the educational situation aimed at the formation of interethnic tolerance among students at the stage of adaptation to the educational environment of the university. Methods. In the course of the study, a theoretical analysis of psychological and pedagogical literature of the problem was carried out. It helped us to clarify the degree of relevance of the problem being studied. The method of observation and pedagogical experience analysis allowed us to describe the educational situation aimed at the interethnic tolerance formation. The results of the study. Interethnic tolerance is considered to be a manifestation of the future specialist’s ability to interpersonal interaction in professional activities. The levels of interethnic tolerance formation among university students are given: amorphous-fragmentary, interiorization-reflexive and activity-holistic. In the article the educational situation “Adaptation” is described which is aimed at the formation of interethnic tolerance among students of multicultural educational groups the period of adaptation to the educational environment of the university.. Practical implications. The article will be useful for lecturers, curators of study groups, specialists in educational work with students, including tutors.
Обоснование. Аббревиация, являясь одним из продуктивных способов словообразования терминологических единиц английского языка, требует тщательного изучения. Развитие науки, процессы информатизации и цифровизации современного общества, привели, с одной стороны, к появлению новых научно-технических понятий, с другой стороны, к стремлению к передаче информации в сжатом виде. Именно тенденция к компрессии информации является причиной появления аббревиатур, в частности, консонантного типа буквенной аббревиации. Ранее полагали, что аббревиатуры данного типа в английском языке отсутствуют. Цель работы заключается в выявлении и описании сущностных характеристик сокращений консонантного типа буквенной аббревиации английской терминологии. Методы исследования. В процессе исследования был проведен теоретический анализ научной литературы по изучаемому вопросу. Также были применены методы лингвистического наблюдения и анализа структуры сокращения. Материалом исследования послужили данные многоязычных словарей сокращений и отраслевых технических словарей, в которых сокращения даны в списках приложений, материалы конференций “International Conference on Environment Pollution and Prevention” (ICEPP: 2015- 2020) Результаты исследования. В процессе исследования выявлен новый тип буквенных сокращений, который характеризуется образованием аббревиатуры путем удаления из слова гласных букв. Проанализированы сущностные характеристики сокращений консонантного типа буквенной аббревиации английской терминологии. Область применения результатов. Практическая значимость результатов исследования заключается в возможности использования полученных данных при преподавании иностранного языка (английского) в процессе подготовки технических переводчиков.
Обоснование. Аббревиация в терминологии по энергетике и защите окружающей среды является продуктивным способом словообразования. Причиной этому является постоянный рост технического прогресса, с одной стороны и появление новых сложных научно-технических понятий, с другой. Новые условия жизни, развитие науки, появление новой терминологии меняют требования общества к готовности преподавателя иностранного языка и к подготовке студентов инженерно-технических специальностей по дисциплине «Иностранный язык» в вузе. Аббревиатуры являются важным компонентом научно-технических текстов, знание основных типов аббревиации способно в значительной степени облегчить прочтение и понимание текста специалистами. Цель работы заключается в выделении основных, наиболее частотных типов аббревиатур, функционирующих в английской терминологии по энергетике и защите окружающей среды. Методы исследования. В процессе исследования был проведен теоретический анализ научной литературы по изучаемому вопросу. Также был применен метод сплошной выборки и метод лингвистического наблюдения. Материалом исследования послужил «Англо-русский словарь по энергетике и защите окружающей среды» А.С. Гольдберга, включающий около 5 000 сокращений, материалы конференций “International Conference on Environment Pollution and Prevention” (ICEPP: 2015-2020). Результаты исследования показали, что наиболее продуктивными типами аббревиации являются буквенные сокращения. Гораздо реже в терминологии по энергетике и защите окружающей среды встречаются цифровые сокращения, усеченные слова. В процессе исследования выявлен новый тип буквенных сокращений, который характеризуется образованием аббревиатуры путем удаления из слова гласных букв. Область применения результатов. Практическая значимость результатов исследования заключается в возможности использования полученных данных в практике преподавания иностранного языка (английского) студентам технического вуза и при подготовке технических переводчиков.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.