This paper investigates [Formula: see text]-anisotropy for characterizing fractured reservoirs — specifically, the variation of the seismic quality factor [Formula: see text] versus offset and azimuth (QVOA). We derive an analytical expression for P-wave attenuation in a transversely isotropic medium with horizontal symmetry axis (HTI) and provide a method (QVOA) for estimating fracture direction from azimuthally varying [Formula: see text] in PP-wave reflection data. The QVOA formula is similar to Rüger’s approximation for PP-wave reflection coefficients, the theoretical basis for amplitude variation with angle offset (AVOA) analysis. The technique for QVOA analysis is similar to azimuthal AVO analysis. We introduce two new seismic attributes: [Formula: see text] versus offset (QVO) gradient and intercept. QVO gradient inversion not only indicates fracture orientation but also characterizes [Formula: see text]-anisotropy. We relate the [Formula: see text]-anisotropy parameter [Formula: see text] to fractured-medium parameters and invert the QVO gradient to estimate [Formula: see text]. The attenuation parameter [Formula: see text] and Thomsen-style anisotropy parameter [Formula: see text] are found to be interdependent. The attenuation anisotropy magnitude strongly depends on the host rock’s [Formula: see text] parameter, whereas the dependence on fracture parameters is weak. This complicates the QVO gradient inversion for the fracture parameters. This result is independent of the attenuation mechanism. To illustrate the QVOA method in synthetic data, we use Hudson’s first-order effective-medium model of a dissipative fractured reservoir with fluid flow between aligned cracks and random pores as a possible mechanism for P-wave attenuation.

This study attempts to validate a mathematical formalism of introducing attenuation into Schoenberg's linear slip model. This formalism is based on replacing the real-valued weaknesses by complex-valued ones. During an ultrasonic experiment, performed at a central frequency of 100 kHz on a plate-stack model with 1-mm-thick Plexiglas™ plates, the velocity and attenuation ͑inverse of the quality factor Q͒ of P-, SH-, and SV-waves are measured in directions from 25°to 90°with the symmetry axis for dry and oil-saturated models and loading uniaxial pressures of 2 and 4 MPa. The velocity and attenuation data are fitted by the derived theoretical functions. The values of the real and imaginary parts of the complex-valued weaknesses are estimated. The real parts of the weaknesses, which have a clear physical meaning ͑they affect the weakening of the material͒, are three times larger for the dry model than for the oil-saturated one. The imaginary parts of the weaknesses are responsible for attenuation; their values are an order of magnitude smaller than the real parts. The derived expressions for angle-dependent velocities and attenuations can be used to distinguish between dry and oil-saturated fractures. In particular, the P-wave attenuation function in the symmetry-axis direction ͑normal to fracture planes͒ is different in dry and saturated media. The experiment shows that the platestack model is inhomogeneous because of the nonuniform pressure distribution, which degrades the experimental results and creates difficulties in the inversion for the complex-valued weaknesses -particularly in joint inversion of P-and S-wave data.

This is a study on anisotropy of seismic attenuation in a transversely isotropic (TI) model, which is a long-wavelength equivalent of an isotropic medium with embedded parallel fractures. The model is based on Schoenberg's linear-slip theory. Attenuation is introduced by means of a complex-valued stiffness matrix, which includes complex-valued normal and tangential weaknesses. To study the peculiarities of seismic attenuation versus wave-propagation direction in TI media, numerical modeling was performed. The modelinput data were the complex-valued weaknesses found from the laboratory ultrasonic experiment made with a Plexiglas plate-stack model, oil-saturated (wet) and air-filled (dry). The laboratory experiment and the numerical modeling have shown that in the vicinity of the symmetry axis, in the wet model, P-wave attenuation is close to S-wave attenuation, while in the dry model, P-wave attenuation is much greater than S-wave attenuation. Moreover, the fluid fill affects the P-wave attenuation pattern. In the dry (air-saturated) model, the attenuation pattern in the vicinity of the symmetry axis exhibits steeper slope and curvature than in the wet (oil-saturated) model. To define the slope or the curvature, a QVO gradient was introduced, which was found to be proportional to the symmetry-axis Q S /Q P -ratio, which explains the differences between dry and wet models. Thus, depending on the Q S /Q P -ratio, the QVO gradient can serve as an indicator of the type of fluid in fractures, because the QVO gradient is greater in gas-saturated than in liquid-saturated rocks. The analysis of P-wave attenuation anisotropy in seismic reflection and vertical seismic profiling data can be useful in seismic exploration for distinguishing gas from water in fractures.

No abstract