We present a theoretical and experimental study of analyte preconcentration via peak mode isotachophoresis (ITP). We perform perturbation analysis of the governing equations that includes electromigration, diffusion, buffer reactions, and nonlinear ionic strength effects. This analysis relaxes the inherent numerical stiffness and achieves a fast solution to the transient sample evolution problem. In this model, we have incorporated a semiempirical relation to capture dispersion phenomenon within ITP interfaces. We also present a simple, closed-form analytical model that identifies key parameters governing the preconcentration dynamics in peak mode ITP. We have validated our models through a detailed experimental study performed in constant current conditions. The relevant governing experiment parameters were varied independently; namely, the leading electrolyte concentration, trailing electrolyte concentration, and current. Through our experimental study, we have identified optimum conditions to achieve high preconcentration ratio and sample accumulation rates. Our approach to the theoretical problem and experimental study provides useful guidelines in optimizing parameters such as detector location, ITP duration, and electrolyte composition in ITP preconcentration and separation assays.

We present a method to achieve separation and indirect detection of nonfluorescent species using fluorescent mobility markers. This technique leverages isotachophoresis (ITP) for both preconcentration and separation. We employ a leading electrolyte (LE), trailing electrolyte (TE), and a set of fluorescent markers of mobilities designed to bound those of nonfluorescent analytes of interest. Fluorescent markers and nonfluorescent analytes are initially mixed homogenously and ITP is initiated. The dynamics of isotachophoresis cause the analyte and fluorescent marker mixture to segregate into respective zones between the LE and TE in the order of reducing mobility. Unlabeled analytes are detected as gaps (regions with local minimums in intensity) in the fluorescent signals of mobility markers. We have successfully demonstrated preconcentration, separation, and detection of unlabeled amino acids serine, glycine, and phenylalanine; and of acetic acid, aspartic acid, and 3-phenylpropionic acid. We show detection of 12 microM concentration of analytes with signal-to-noise ratio of 4.0 and with a high degree of repeatability. We discuss methods for encoding mobility marker identity using marker fluorescence intensity level and alternating fluorescence emission wavelengths. We present example experimental results of fluorescence intensity level encoding.

We present a method that achieves simultaneous preconcentration and separation of analytes using peak-mode isotachophoresis with a single step injection in simple, off-the-shelf microchannels or capillaries. We leverage ions resulting from dissolved atmospheric carbon dioxide to weakly disrupt isotachophoretic preconcentration and induce separation of analyte species. We experimentally study the region between the leading and trailing electrolytes, and individually identify the carbonate and carbamate zones that result from the hydration and carbamation reaction of dissolved atmospheric carbon dioxide, respectively. The width of these zones and the gradient regions between them grow with time and create an electric field gradient that causes analytes to separate. Using this assay, we achieve focusing and separation of a 25 bp DNA ladder in a straight, 34 microm wide microchannel in a single loading step. As a demonstration of the fractionation capabilities of the assay, we show simultaneous preconcentration and separation of a DNA ladder from two proteins, GFP and allophycocyanin.

The increasing complexity of modern integrated circuits and need for high-heat flux removal with low junction temperatures motivates research in a wide variety of cooling and refrigeration technologies. Two-phase liquid cooling is especially attractive due to high efficiency and low thermal resistances. While two-phase microfluidic cooling offers important benefits in required flow rate and pump size, there are substantial challenges related to flow stability and effective superheating. This work investigates the use of hydrophobic membrane to locally vent the vapor phase in microfluidic heat exchangers. Previous work has demonstrated selective venting of gas in microstructures and we extend this concept to two-phase heat exchangers. This paper details the design, fabrication and preliminary testing of the novel heat exchanger. Proof-of-concept of the device, carried out using an isothermal air-water mixture, found the air-mass venting efficiency exceeding 95%. Two-phase, thermal operation of the heat exchanger found the pressure-drop to be smaller compared to a two-phase, non-venting model. The paper also includes a discussion of design challenges such as membrane leakage and optical inaccessibility. The favorable results demonstrated in this first-generation, vapor-venting, micromachined, heat exchanger motivates further study of this and other novel microstructures aimed at mitigating the negative effects of phase-change. With continued research and optimization, we believe two-phase cooling is a viable solution for high heat flux generating electronics.

No abstract