Epoxidation of propylene into propylene oxide (PO) in the gas phase is a highly challenging reaction. Cu-based catalysts have been active for this reaction, but the state of Cu as an active species is still debatable. In this paper, we report the propylene epoxidation activity of solution combustion synthesized Cu/CeO2 catalysts with the CO + O2 mixture at low temperatures (50–100 °C) peaking at ∼80 °C. The highest PO yield was obtained with 20–25% Cu loading in CeO2. In contrast, the reaction over the catalyst containing nonreducible support such as Cu/SiO2 occurred above 170 °C. Detailed structural characterization indicated two types of Cu species such as Cu2+ partly (∼3%) dissolved in CeO2 forming a Cu x Ce1–x O2−δ phase and the remaining amount formed highly dispersed CuO as a separate phase. Thus, the highest activity relates to the optimum presence of CuO along with Ce1–x Cu x O2−δ. The reducibility of the Cu species in two phases was significantly shifted toward lower temperatures, indicating strong electronic interaction between the two phases. The substituted Cu2+ was reduced first, and then, the bulk CuO reduction was initiated. In situ spectroscopic studies showed Cu+ formation from Cu2+ over Cu/CeO2 catalysts even at room temperature unlike in CeO2 or CuO + CeO2 physical mixtures, indicating strong electronic interaction between Ce1–x Cu x O2−δ and CuO phases on CO adsorption in the Cu/CeO2 catalyst. It is proposed that substituted Cu2+ along with Ce4+ is reduced easily, and then, Ce3+ promotes the reduction of the interfacial CuO phase that might donate active oxygen species for epoxidation reaction.

Selective oxidation of benzyl alcohol to benzaldehyde in the vapor phase has drawn growing interest recently. In this work, MnO x –CeO2 mixed oxide compositions have been prepared by a coprecipitation method and tested for their oxidation activities of benzyl alcohol to benzaldehyde in the vapor phase. Detailed structural analyses have indicated that MnO x –CeO2 catalysts contain two phases, namely, α-MnO2 and fluorite CeO2 phases. The benzyl alcohol oxidation activity of pure MnO2 is more than 7 times higher compared to that of CeO2, indicating a much higher intrinsic oxidation ability of the MnO2 phase. Further, enhancement of the benzyl alcohol oxidation rate over MnO2 in 10%MnO x –CeO2 catalyst by 13 times is observed in relation to pure MnO2. The role of CeO2 in the MnO x –CeO2 catalyst has also been investigated, which indicates that the oxidation activity is almost independent of CeO2. However, stronger adsorption of benzyl alcohol over the MnO x –CeO2 catalysts compared to that of MnO2 points to the role of CeO2 in adsorption. Thus, both the CeO2 and the MnO2 components have different roles in the catalytic processadsorption of benzyl alcohol on the CeO2 surface and its oxidation on MnO2 at the interface. The cooperation between the two sites toward oxidation could happen due to jumping of adsorbed benzyl alcohol from the surface of the CeO2 phase to the closest Mn4+ site in the MnO2 phase at the contact surface with MnO2 by thermal motion.