This paper simulates and analyzes numerically the dispersion characteristics of the waves propagating in the shallow-ocean overlying a semi-infinite elastic solid. The analytical solution of the acoustic field in the shallow-ocean, excited by an explosive point source in the solid bottom, is derived by using the theories for sound propagation in liquid and solid. The time-domain waveforms of transient acoustic field are simulated with the above analytical solution. The dispersion characteristics of the transient acoustic field are analyzed by using the smoothed pseudo Wigner-Ville distribution.
The full matrix material constants of piezoelectric materials should be characterized first before they have been used to make actuators or sensors. Up to now, they are usually determined by the ultrasonic pulse-echo and electric impedance resonance techniques through using multiple samples with drastically different sizes. However, the constants determined by the aforementioned techniques are probably inconsistent because the sample-to-sample variation cannot be eliminated. The technique of resonant ultrasonic spectroscopy (RUS) only needs one sample to determine the full matrix constants of piezoelectric material. Therefore, the consistency of the constants is guaranteed. During the implementation of the RUS technique, the elastic stiffness cijE and piezoelectric constants cij can be determined from the resonance modes identified from the resonant ultrasonic spectrum. The free and clamped dielectric constants cannot be determined by the RUS technique because they have very weak influence on resonance frequency. However, they can be directly measured from the same sample by using an impedance analyzer. To ensure the reliable inversion of material constants, enough resonance modes should be identified from the measured resonant ultrasonic spectrum. However, there are many missing and overlapped modes in the spectrum, which makes mode identification become a biggest obstacle to the implementation of the RUS technique. The adjacent modes may overlap if the resonance frequencies corresponding to them have a very small difference. In addition, the lower the mechanical quality factor QM, the more likely to overlap the adjacent modes are. During the RUS measurement, the rectangular parallelepiped sample is placed between the transmitting and receiving transducers with contacts only at the opposite corners of the sample. Resonance modes would not be detected if the receiving point, i.e., one corner of the sample, is the node of these modes. Therefore, there are missing modes in the resonant ultrasonic spectrum. To overcome the difficulty in identifying the modes, caused by modes missing and overlapping, the mode identifying method via temperature variation is presented in this study. Note that a change of temperature may change the material properties of a piezoelectric sample. The material properties have a great influence on the resonance frequency of the sample. Moreover, the influences corresponding to resonance modes are different. Therefore, the variation of temperature may make the overlapped modes separated from each other and the missing modes appear, namely, the missing and overlapped modes may be identified by comparing the resonant ultrasonic spectra measured at different temperatures. The experimental results of piezoelectric ceramics (PZT-8) show that this method can effectively improve the accuracy of mode identification and guarantee the reliability of inversion in the RUS technique.
The microstructure effect o f ultrasonic waves in a unidirectional titanium graphite composite is analyzed by the mode energy conversions o f the laser-generated ultrasonic Lamb waves. The carrying energy of each mode in the Lamb waves is calculated quantitatively by the time-frequency filtering technique o f the Wigner distribution. We found that the energy conversions among modes have happened in the process o f propagation o f ultrasonic Lamb wave. These energy conversions are attributed to microstructure scattering of ultrasonic wave by the fibers in a fiber reinforced composite material. This work will provide a quantitative method of ultrasonic characterization o f microstructure feature of the composite materials by the laser-generated Lamb wave technique.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.