No abstract

CCQM-K120.a comparison involves preparing standards of carbon dioxide in air which are fit for purpose for the atmospheric monitoring community, with stringent requirements on matrix composition and measurement uncertainty of the CO2 mole fraction. This represents an analytical challenge and is therefore considered as a Track C comparison. The comparison will underpin CMC claims for CO2 in air for standards and calibrations services for the atmospheric monitoring community, matrix matched to real air, over the mole fraction range of 250 μmol/mol to 520 μmol/mol. CCQM-K120.b comparison tests core skills and competencies required in gravimetric preparation, analytical certification and purity analysis. It is considered as a Track A comparison. It will underpin CO2 in air and nitrogen claims in a mole fraction range starting at the smallest participant's reported expanded uncertainty and ending at 500 mmol/mol. Participants successful in this comparison may use their result in the flexible scheme and underpin claims for all core mixtures This study has involved a comparison at the BIPM of a suite of 44 gas standards prepared by each of the participating laboratories. Fourteen laboratories took part in both comparisons (CCQM-K120.a, CCQM-K120.b) and just one solely in the CCQM-K120.b comparison. The standards were sent to the BIPM where the comparison measurements were performed. Two measurement methods were used to compare the standards, to ensure no measurement method dependant bias: GC-FID and FTIR spectroscopic analysis corrected for isotopic variation in the CO2 gases, measured at the BIPM using absorption laser spectroscopy. Following the advice of the CCQM Gas Analysis Working Group, results from the FTIR method were used to calculate the key comparison reference values. KEY WORDS FOR SEARCH FTIR, CO2, GC-FID, Carbon dioxide at background level, Carbon dioxide at urban level, Delta Ray, CO2 gas standards Main text To reach the main text of this paper, click on Final Report. Note that this text is that which appears in Appendix B of the BIPM key comparison database kcdb.bipm.org/. The final report has been peer-reviewed and approved for publication by the CCQM, according to the provisions of the CIPM Mutual Recognition Arrangement (CIPM MRA).

We present the global research landscape which aims to deliver a measurement infrastructure to underpin atmospheric observations of key greenhouse gases governing changes in the Earth's climate. These measurements present a significant challenge to the metrological community, analytical laboratories and major producers of reference materials. The review focuses on the progress made in the Gas Analysis Working Group of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology (CCQM-GAWG) in establishing the primary realisation of the amount-of-substance fraction for carbon dioxide, methane and nitrous oxide in an air matrix. It also focuses on the importance of providing traceable measurements of isotopic composition of these components for commutability of reference materials and for isotope ratio measurements for greenhouse gas source attribution. Metrologia 56 (2019) 034006 (29pp) P J Brewer et al 2 of the World Meteorological Organization (WMO) for providing the framework for the development and implementation of integrated greenhouse gas observations, which is vital for understanding the global carbon cycle and the role greenhouse gases play in climate change. The developments in analytical techniques are also discussed which have shaped the direction of the metrology required to meet the evolving and future needs of stakeholders.

A microfluidic device with an integrated fluorescence detection system has been developed in order to miniaturize the entire analytical system. A blue or green light-emitting diode (LED) and an optical fiber were mounted in a polydimethylsiloxane-based microchip. The performance of this device was evaluated by microchip electrophoresis. When a green LED was used as the light source, the calibration curve of Sulforhodamine-101 was linear over the range 1-100 microM. The detection limit was found to be 600 nM (240 amol) for a S/N ratio of 3. When using a blue LED, the calibration curve of Fluorescein was linear over the range 0.2-100 microM. The detection limit was estimated to be 120 nM (50 amol) (S/N=3). The detection sensitivity per unit power was comparable to that of LIF. The RSD values for the migration time, peak height and peak area were 0.74, 7.18 and 9.45%, respectively. The integrated microfluidic device was successfully used to determine amino acid derivatives.

Thermal lens spectroscopy was combined with total internal reflectance spectroscopy to develop a novel, highly sensitive analytical method that can detect nonfluorescent as well as fluorescent analytes at surfaces and interfaces. It was verified that when the total internal reflection method is coupled with thermal lens spectroscopy (TIR-TLS), the thermal lens effect is induced by only the evanescent wave. The ability of depth profiling was shown. The detection limit of TIR-TLS was at an absorbance of 3.0 x 10(-5) unit for Sudan II acetone solution, which is better than that of attenuated total reflection by a factor of hundreds. In addition, the adsorption of acridine orange on silanol groups on a glass surface could be monitored directly by TIR-TLS, and the adsorption isotherm agreed well with Langmuir's model. The dependence of surface density of anionic silanol groups on pH was determined by TIR-TLS measurements of aqueous acridine orange solutions buffered in the pH range between 2.7 and 11.5.