The monolayer deposition of nanoscale colloidal particles (Au citrate sols) was demonstrated by employing an aminofunctional silane [3-(2-Aminoethlyamino) propyltrimethoxysilane] as a coupling agent. The compatibility of this colloidal Au deposition method with conventional electron beam lithography techniques was examined, and the two-dimensional patterning of the Au colloidal monolayer was demonstrated. Using this fabrication method, a proposal for a single electron device structure based on nanoscale (2 nm diameter) gold colloidal particles was made.

We report a versatile method to confine metal thin films in micro- and nanopatterns using directed self-assembly on the templates fabricated from phase-separated mixed Langmuir-Blodgett (LB) films. The pattern of the mixed LB films can be tuned by adjusting intermolecular interaction between the film-forming molecules in the LB films and by varying the fabrication conditions of the films such as the mixing ratio, subphase temperature, and surface pressure. We use the patterned LB films for templates to confine metal in patterned regions, taking advantage of the difference between the surface free energy of the patterned regions and that of the self-assembled monolayer of the silane coupling agent. Au nanoparticles are confined onto the patterned films as a catalyst for the succeeding Cu electroless deposition. The atomic force microscopic images, Auger electron spectra, and scanning Auger electron maps of a Cu-deposited film show that Cu is selectively deposited on the patterns of phase separation of the original mixed LB films.

BackgroundThe need for a new style of clinical trials, called decentralized clinical trials (DCTs), has been increasing as they do not depend on physical visits to clinical sites. DCTs are expected to provide a new opportunity to patients who cannot participate in a clinical trial due to geographical and time limitations. For the adoption of DCTs, it is essential that medical devices with Internet of Medical Things (IoMT) and Internet of Health Things (IoHT) based technologies are developed and commercially adopted. In this study, we aimed to identify the regulatory considerations when IoMT/IoHT-based technologies are used in DCTs or products developed using DCTs.MethodTo understand the study and development field of IoMT/IoHT comprehensively and panoramically, relevant papers published in Web of Science were searched online. Subsequently, a citation network was obtained and characterized as a cluster using a text mining method to identify IoMT/IoHT-based technologies expected to be utilized in DCTs or products developed using DCTs.Result and DiscussionUpon analysis of the top 15 clusters and subsequent 51 sub-clusters, we identified the therapeutic areas (psychology, neurology) and IoMT/IoHT-based technologies (telemedicine, remote monitoring, and virtual reality) that are expected to be used in DCTs. We also identified several considerations based on the current regulatory guidance.ConclusionIoMT/IoHT-based technologies that are expected to be used or products developed using DCTs and key considerations made when they are used in DCTs were identified. The considerations could encourage conducting DCTs using IoMT/IoHT-based technologies.

A novel mercury-free Dewar-like (double-walled structure) microwave discharge thermally-insulated electrodeless lamp (MDTIEL) was fabricated and its performance evaluated using the photo-isomerization of trans-urocanic acid (trans-UA) in aqueous media as a test process driven by the emitted UV light when ignited with microwave radiation. The photo-isomerization processes trans-UA → cis-UA and cis-UA → trans-UA were re-visited using light emitted from a conventional high-pressure Hg light source and examined for the influence of UV light irradiance and solution temperature; the temperature dependence of the trans → cis process displayed a negative activation energy, E(a) = -1.3 cal mol(-1). To control the photo-isomerization of urocanic acid from the heat usually dissipated by a microwave discharge electrodeless lamp (single-walled MDEL), it was necessary to suppress the microwave-initiated heat. For comparison, the gas-fill in the MDEL lamp, which typically consists of a mixture of Hg and Ar, was changed to the more eco-friendly N(2) gas in the novel MDTIEL device. The dynamics of the photo-isomerization of urocanic acid driven by the UV wavelengths of the N(2)-MDTIEL light source were compared to those from the more conventional single-walled N(2)-MDEL and Hg/Ar-MDEL light sources, and with those from the Hg lamp used to irradiate, via a fiber optic, the photoreactor located in the wave-guide of the microwave apparatus. The heating efficiency of a solution with the double-walled N(2)-MDTIEL was compared to the efficiency from the single-walled N(2)-MDEL device. Advantages of N(2)-MDTIEL are described from a comparison of the dynamics of the trans-UA → cis-UA process on the basis of unit surface area of the lamp and unit power consumption. The considerably lower temperature on the external surface of the N(2)-MDTIEL light source should make it attractive in carrying out photochemical reactions that may be heat-sensitive such as the photothermochromic urocanic acid system.