Purpose The purpose of this paper is to study the influence of magnetic field on entropy generation and natural convection inside an enclosure filled with a hybrid nanofluid and having a conducting wavy solid block. Also, the effect of fluid–solid thermal conductivity ratio is investigated. Design/methodology/approach The governing equations that are formulated in the dimensionless form are discretized via finite volume method. The velocity–pressure coupling is assured by the SIMPLE algorithm. Heat transfer balance is used to verify the convergence. The validation of the numerical results was performed by comparing qualitatively and quantitatively the results with previously published investigations. Findings The results indicate that the magnetic field and the conductivity ratio of the wavy solid block can significantly affect the dynamic and thermal field and, consequently, the heat transfer rate and entropy generation because of heat transfer, fluid friction and magnetic force. Originality/value To the best of the authors’ knowledge, the present numerical study is the first attempt to use hybrid nanofluid for studying the entropy generation because of magnetohydrodynamic natural convective flow in a square cavity with the presence of a wavy circular conductive cylinder. Irreversibilities due to magnetic effect are taken into account. The effect of fluid–solid thermal conductivity ratio is considered.

No abstract

No abstract

No abstract

No abstract

No abstract

In this paper, the problem of steady forced convection heat transfer and fluid flow characteristics of a hybrid nanofluid flowing through an isothermally heated horizontal tube considering various nanoparticle shapes has been investigated numerically. The three dimensionless cylindrical coordinate equations are discretized using the finite volume method and solved via a FORTRAN program. A numerical parametric investigation is carried out for a tube filled with regular water, (TiO 2 /water) nanofluid and (Ag-TiO 2 /water) hybrid nanofluid. Four different types of nanoparticle shapes are considered in this study, spherical, cylindrical, platelets and blades, with different volume fractions ranging from 0 to 8% using water as a base liquid. The influence of nanoparticle shape, nanoparticle concentration and Reynolds number on the local Nusselt number and the friction factor is essentially examined. The results showed that the friction factor of both nanofluid and hybrid nanofluid flow was increased as the nanoparticle volume fraction increased for all kinds of nanoparticle shapes, whereas it decreased as the Reynolds number increased. Nusselt number increased with increase in the nanoparticle concentration and Reynolds number. The highest heat transfer rate was acquired for the maximum nanoparticle volume concentration by using blade nanoparticle shape followed by platelet shape, cylindrical shape and lastly the sphere shape. It was found that the maximum values of the friction factor were registered for platelet-shape nanoparticles.

No abstract