An important trend in electronics involves the development of materials, mechanical designs and manufacturing strategies that enable the use of unconventional substrates, such as polymer films, metal foils, paper sheets or rubber slabs. The last possibility is particularly challenging because the systems must accommodate not only bending but also stretching. Although several approaches are available for the electronics, a persistent difficulty is in power supplies that have similar mechanical properties, to allow their co-integration with the electronics. Here we introduce a set of materials and design concepts for a rechargeable lithium ion battery technology that exploits thin, low modulus silicone elastomers as substrates, with a segmented design in the active materials, and unusual 'self-similar' interconnect structures between them. The result enables reversible levels of stretchability up to 300%, while maintaining capacity densities of B1.1 mAh cm À 2 . Stretchable wireless power transmission systems provide the means to charge these types of batteries, without direct physical contact.
Silicon is a promising candidate for electrodes in lithium ion batteries due to its large theoretical energy density. Poor capacity retention, caused by pulverization of Si during cycling, frustrates its practical application. We have developed a nanostructured form of silicon, consisting of arrays of sealed, tubular geometries that is capable of accommodating large volume changes associated with lithiation in battery applications. Such electrodes exhibit high initial Coulombic efficiencies (i.e., >85%) and stable capacity-retention (>80% after 50 cycles), due to an unusual, underlying mechanics that is dominated by free surfaces. This physics is manifested by a strongly anisotropic expansion in which 400% volumetric increases are accomplished with only relatively small (<35%) changes in the axial dimension. These experimental results and associated theoretical mechanics models demonstrate the extent to which nanoscale engineering of electrode geometry can be used to advantage in the design of rechargeable batteries with highly reversible capacity and long-term cycle stability.
Rationally designed FeS2@carbon yolk–shell nanoboxes exhibit impressive electrochemical performance when evaluated as an anode material for sodium-ion batteries.
Exploring new materials with high efficiency and durability is the major requirement in the field of sustainable energy conversion and storage systems. Numerous techniques have been developed in last three decades to enhance the efficiency of the catalyst systems, control over the composition, structure, surface area, pore size, and moreover morphology of the particles. In this respect, metal organic framework (MOF) derived catalysts are emerged as the finest materials with tunable properties and activities for the energy conversion and storage. Recently, several nano- or microstructures of metal oxides, chalcogenides, phosphides, nitrides, carbides, alloys, carbon materials, or their hybrids are explored for the electrochemical energy conversion like oxygen evolution, hydrogen evolution, oxygen reduction, or battery materials. Interest on the efficient energy storage system is also growing looking at the practical applications. Though, several reviews are available on the synthesis and application of MOF and MOF derived materials, their applications for the electrochemical energy conversion and storage is totally a new field of research and developed recently. This review focuses on the systematic design of the materials from MOF and control over their inherent properties to enhance the electrochemical performances.
Crystalline–amorphous phase boundary engineering can be an effective strategy to develop cost-effective and high-performance electrocatalysts for water splitting.
Problems related to tremendous volume changes associated with cycling and the low electron conductivity and ion diffusivity of Si represent major obstacles to its use in high-capacity anodes for lithium ion batteries. We have developed a group IVA based nanotube heterostructure array, consisting of a high-capacity Si inner layer and a highly conductive Ge outer layer, to yield both favorable mechanics and kinetics in battery applications. This type of Si/Ge double-layered nanotube array electrode exhibits improved electrochemical performances over the analogous homogeneous Si system, including stable capacity retention (85% after 50 cycles) and doubled capacity at a 3C rate. These results stem from reduced maximum hoop strain in the nanotubes, supported by theoretical mechanics modeling, and lowered activation energy barrier for Li diffusion. This electrode technology creates opportunities in the development of group IVA nanotube heterostructures for next generation lithium ion batteries.
The design of efficient, low-cost, and stable electrocatalyst systems toward energy conversion is highly demanding for their practical use. Large scale electrolytic water splitting is considered as a promising strategy for clean and sustainable energy production. Herein, we report a self-supported NiFe layered double hydroxide (LDH)-NiSe electrocatalyst by stepwise surface-redox-etching of Ni foam (NF) through a hydrothermal process. The as-prepared NiFe LDH-NiSe/NF catalyst exhibits far better performance in alkaline water oxidation, proton reduction, and overall water splitting compared to NiSe/NF or NiFe LDH/NF. Only 240 mV overpotential is required to obtain a water oxidation current density of 100 mA cm, whereas the same for the hydrogen evolution reaction is 276 mV in 1.0 M KOH. The synergistic effect from NiSe and NiFe LDH leads to the evolution of a highly efficient catalyst system for water splitting by achieving 10 mA cm current density at only 1.53 V in a two-electrode alkaline electrolyzer. In addition, the designed electrode produces stable performance for a long time even at higher current density to demonstrate its robustness and prospective as a real-life energy conversion system.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.