Mechanically deformable devices and sensors enable conformal coverage of electronic systems on curved and soft surfaces. Sensors utilizing liquids confined in soft templates as the sensing component present the ideal platform for such applications, as liquids are inherently more deformable than solids. However, to date, liquid-based devices have been limited to metal lines based on a single-liquid component given the difficulty in the fabrication of liquidbased junctions due to intermixing. Here, we demonstrate a robust platform for the fabrication of liquid-liquid 'heterojunction' devices, presenting an important advancement towards the realization of liquid-state electronic systems. The device architecture and fabrication scheme we present are generic for different sensing liquids, enabling demonstration of sensors responsive to different stimuli. As a proof of concept, we demonstrate temperature, humidity and oxygen sensors by using different ionic liquids, exhibiting high sensitivity with excellent mechanical deformability arising from the inherent property of the liquid phase.

In this work, we report a novel donor-acceptor based solution processable low band gap polymer semiconductor, PDPP-TNT, synthesized via Suzuki coupling using condensed diketopyrrolopyrrole (DPP) as an acceptor moiety with a fused naphthalene donor building block in the polymer backbone. This polymer exhibits p-channel charge transport characteristics when used as the active semiconductor in organic thin-film transistor (OTFT) devices. The hole mobilities of 0.65 cm 2 V À1 s À1 and 0.98 cm 2 V À1 s À1 are achieved respectively in bottom gate and dual gate OTFT devices with on/off ratios in the range of 10 5 to 10 7 . Additionally, due to its appropriate HOMO (5.29 eV) energy level and optimum optical band gap (1.50 eV), PDPP-TNT is a promising candidate for organic photovoltaic (OPV) applications. When this polymer semiconductor is used as a donor and PC 71 BM as an acceptor in OPV devices, high power conversion efficiencies (PCE) of 4.7% are obtained. Such high mobility values in OTFTs and high PCE in OPV make PDPP-TNT a very promising polymer semiconductor for a wide range of applications in organic electronics.

Despite the widespread interest in graphene electronics over the past decade, high-performance graphene field-effect transistors (GFETs) on flexible substrates have been rarely achieved, even though this atomic sheet is widely understood to have greater prospects for flexible electronic systems. In this article, we report detailed studies on the electrical and mechanical properties of vapor synthesized high-quality monolayer graphene integrated onto flexible polyimide substrates. Flexible graphene transistors with high-k dielectric afforded intrinsic gain, maximum carrier mobilities of 3900 cm(2)/V·s, and importantly, 25 GHz cutoff frequency, which is more than a factor of 2.5 times higher than prior results. Mechanical studies reveal robust transistor performance under repeated bending, down to 0.7 mm bending radius, whose tensile strain is a factor of 2-5 times higher than in prior studies. In addition, integration of functional coatings such as highly hydrophobic fluoropolymers combined with the self-passivation properties of the polyimide substrate provides water-resistant protection without compromising flexibility, which is an important advancement for the realization of future robust flexible systems based on graphene.

Air-stable n-doping of carbon nanotubes is presented by utilizing SiN(x) thin films deposited by plasma-enhanced chemical vapor deposition. The fixed positive charges in SiN(x), arising from (+)Si ≡ N3 dangling bonds induce strong field-effect doping of underlying nanotubes. Specifically, an electron doping density of ∼ 10(20) cm(-3) is estimated from capacitance voltage measurements of the fixed charge within the SiN(x). This high doping concentration results in thinning of the Schottky barrier widths at the nanotube/metal contacts, thus allowing for efficient injection of electrons by tunnelling. As a proof-of-concept, n-type thin-film transistors using random networks of semiconductor-enriched nanotubes are presented with an electron mobility of ∼ 10 cm(2)/V s, which is comparable to the hole mobility of as-made p-type devices. The devices are highly stable without any noticeable change in the electrical properties upon exposure to ambient air for 30 days. Furthermore, the devices exhibit high uniformity over large areas, which is an important requirement for use in practical applications. The work presents a robust approach for physicochemical doping of carbon nanotubes by relying on field-effect rather than a charge transfer mechanism.