No abstract

No abstract

Recently Building Information Modeling (BIM) has been widely used to manage building information throughout the project life-cycle more effectively and efficiently. Particularly in quantity take-off and estimation, BIM-based process is getting more and more attention, and even BIM-based quantity take-off at the most detailed level has been performed in several building projects in South Korea. The practitioners involved in those projects have pointed out that modeling rough and finish interior of a building occupies a big portion of time in the whole modeling process and the manual modeling for interior is error-prone, which could cause serious result, such as wrong cost estimation and disputes. To resolve the problem, this research proposes an automated modeling method that model a building interior automatically after selecting an interior method by a room or space basis. This research develops a interior modeling method and a system that can model various rough and finish interior components automatically at once after a user select the type of interior for a given space or room. To do so, this research identifies typical interior types of buildings and a house built in South Korea, and develops a mechanism that can support modeling both typical and non-typical types of interior by allowing the flexibility in selecting interior material and components and the order of construction process for the selected items. The automated modeling system for building interior has been preliminarily tested at a typical condominium building project and found that the system could improve dramatically the productivity of BIM-based quantity take-off and estimation process.

Construction supply chain management (CSCM) has become one of the critical factors that determine the success of a construction project as it becomes increasingly complicated and mega-sized. Particularly for high-rise or mega-sized building construction, just-in-time supply chain management is required due to lack of storage space and effective logistics for construction components and materials at a construction site. Despite the fact that research and development of radio frequency identification (RFID) and wireless sensor network (WSN) technology have been performed, construction project managers still need to carry mobile devices and check material and component flow at each stage of the supply chain process. This research proposes that the equipment used in the construction supply chain process, such as movers, trailers, gates, and hoists, can become main actors in the supply chain process using RFID and WSN technologies. And the proposed equipment and process focused on a solution to the redundancy identification problem, which has been observed in operations that use RFID/WSN-based processes for construction logistics. This paper also presents issues identified through verification and validation of the research results and proposes further studies

No abstract