Non-drug strategies based on biophysical stimulation have been emphasized for the treatment and prevention of musculoskeletal conditions. However, to date, an effective stimulation system for intracorporeal therapies has not been proposed. This is particularly true for active intramedullary implants that aim to optimize osseointegration. The increasing demand for these implants, particularly for hip and knee replacements, has driven the design of innovative stimulation systems that are effective in bone-implant integration. In this paper, a new cosurface-based capacitive system concept is proposed for the design of implantable devices that deliver controllable and personalized electric field stimuli to target tissues. A prototype architecture of this system was constructed for in vitro tests, and its ability to deliver controllable stimuli was numerically analyzed. Successful results were obtained for osteoblastic proliferation and differentiation in the in vitro tests. This work provides, for the first time, a design of a stimulation system that can be embedded in active implantable devices for controllable bone-implant integration and regeneration. The proposed cosurface design holds potential for the implementation of novel and innovative personalized stimulatory therapies based on the delivery of electric fields to bone cells.

No abstract

In microwave heating, the energy is directly introduced into the material resulting in a rapid and volumetric heating process with reduced thermal gradients, when the electromagnetic field is homogeneous. From those reasons, the microwave technology has been widely used in the industry to process dielectric materials. The capacity to heat with microwave radiation is related with the dielectric properties of the materials and the electromagnetic field distribution. The knowledge of the permittivity dependence with the temperature is essential to understand the thermal distribution and to minimize the non-homogeneity of the electromagnetic field. To analyse the history of the heating process, the evolution of the electromagnetic field, the temperature and the skin depth, were simulated dynamically in a ceramic sample. The evaluation of the thermal runaway has also been made. This is the most critical phenomenon observed in the sintering of ceramic materials because it causes deformations, or even melting on certain points in the material, originating the destruction of it. In our study we show that during the heating process the hot spot's have some dynamic, and at high temperatures most of the microwave energy is absorbed at the surface of the material. We also show the existence of a time-delay of the thermal response with the electromagnetic changes.

This paper provides an overview of the macroscopic properties of porcelain tableware fired in a microwave furnace with six magnetrons (each with a nominal power of 900 W) operating at the frequency of 2.45 GHz. The dependence of firing temperature on physical properties such as shrinkage, water absorption, apparent porosity, bulk density, and impact resistance was analyzed. Emphasis is on the differences in the macroscopic properties of microwave and conventionally (gas and electric) fired porcelain. Batches were fired from room temperature up to above the optimum firing temperature (1380°C). Results show similar macroscopic properties for both firing methods, microwave heating required lower firing temperatures (between 1300°C and 1350°C), and shorter processing times (about 70 minutes). The main differences between microwave and electric firing methods occur in a temperature band of 300°C above the porcelain eutectic temperature (close to 1000°C).

No abstract

No abstract

Crystalline carbon-based materials are intrinsically chemically inert and good heat conductors, allowing their applications in a great variety of devices. A technological step forward in heat dissipators production can be given by tailoring the carbon phase microstructure, tuning the CVD synthesis conditions. In this work, a rapid bottom-up synthesis of vertically aligned hybrid material comprising diamond thin platelets covered by a crystalline graphite layer was developed. A single run was designed in order to produce a high aspect ratio nanostructured carbon material favoring the thermal dissipation under convection-governed conditions. The produced material was characterized by multiwavelength Raman spectroscopy and electron microscopy (scanning and transmission), and the macroscopic heat flux was evaluated. The results obtained confirm the enhancement of heat dissipation rate in the developed hybrid structures, when compared to smooth nanocrystalline diamond films.

A new synthetic methodology of water‐soluble gold and silver nanoparticles (AuNPs@TC and AgNPs@TC), using the antibiotic tetracycline (TC) as co‐reducing and stabilizing agent, is reported. Both colloids exhibit high water stability. The average sizes obtained were 25±10 and 15±5 nm, respectively. Both composites were tested against TC‐resistant bacteria, presenting an increasing antibacterial effect in the case of AgNPs@TC. The sensing towards metal ions was also explored. An interesting and reversible affinity of AuNPs@TC towards AlIII cations in an aqueous system was also observed.