Laser operation of Ti:sapphire rib waveguides fabricated using photolithography and ion beam etching in pulsed laser deposited layers is reported. Polarized laser emission was observed at 792.5 nm with an absorbed pump power threshold of 265 mW, which is more than a factor of 2 lower in comparison to their planar counterparts. single-transverse-mode emission. A quasi-cw output power of 27 mW for an absorbed pump power of 1W and a slope efficiency of 5.3% were obtained using an output coupler of 4.6% transmission with a pump duty cycle of 8%.

We experimentally demonstrate a few-mode erbium doped fiber amplifier (FM-EDFA) supporting 6 spatial modes with a cladding pumped architecture. Average modal gains are measured to be >20dB between 1534nm-1565nm with a differential modal gain of ~3dB among the mode groups and noise figures of 6-7dB. The cladding pumped FM-EDFA offers a cost effective alternative to core-pumped variant as low cost, high power multimode pumps can be used, and offers performance, scalability and simplicity to FM-EDFA design.

The laser-induced forward transfer process of solid ceramic donor materials ͑gadolinium gallium oxide and ytterbium doped yttrium aluminium oxide͒ was studied using triazene polymer as a sacrificial layer by means of a time-resolved nanosecond-shadowgraphy technique. The dependence of the ablation dynamics and quality of the ejected donor material on the laser fluence and thickness of the sacrificial and donor layers were investigated and discussed.

No abstract

Abstract:We report the first experimental demonstration of a cladding pumped FM-EDFA supporting 4 mode groups. The modal gains are measured to be >20dB between 1540nm-1570nm with a modal differential gain of ~4dB among the mode groups.