This paper provides an analysis of radio wave scattering for frequencies ranging from the microwave to the Terahertz band (e.g., 1 GHz -1 THz), by studying the scattering power reradiated from various types of materials with different surface roughnesses. First, fundamentals of scattering and reflection are developed and explained for use in wireless mobile radio, and the effect of scattering on the reflection coefficient for rough surfaces is investigated. Received power is derived using two popular scattering models -the directive scattering (DS) model and the radar cross section (RCS) model through simulations over a wide range of frequencies, materials, and orientations for the two models, and measurements confirm the accuracy of the DS model at 140 GHz. This paper shows that scattering can become a prominent propagation mechanism as frequencies extend to millimeter-wave (mmWave) and beyond, but at other times can be treated like simple reflection. Knowledge of scattering effects is critical for appropriate and realistic channel models, which further support the development of massive multiple input-multiple output (MIMO) techniques, localization, ray tracing tool design, and imaging for future 5G and 6G wireless systems.

No abstract

No abstract

Discontinuous reception (DRX), wherein a user equipment (UE) temporarily disables its receiver, is a critical power saving feature in modern cellular systems. DRX is likely to be aggressively used at mmWave and sub-THz frequencies due to the high front-end power consumption. A key challenge for DRX at these frequencies is blockage-induced link outages: A UE will likely need to track many directional links to ensure reliable multi-connectivity, thereby increasing the power consumption. In this paper, we explore reinforcement learning-based link tracking policies in connected mode DRX that reduce power consumption by tracking only a fraction of the available links, but without adversely affecting the outage and throughput performance. Through detailed, system level simulations at 28 GHz (5G) and 140 GHz (6G), we observe that even sub-optimal link tracking policies can achieve considerable power savings with relatively little degradation in outage and throughput performance, especially with digital beamforming at the UE. In particular, we show that it is feasible to reduce power consumption by 75% and still achieve up to 95% (80%) of the maximum throughput using digital beamforming at 28 GHz (140 GHz), subject to an outage probability of at most 1%.

Discontinuous reception (DRX), wherein a user equipment (UE) temporarily disables its receiver, is a critical power saving feature in modern cellular systems. DRX is likely to be aggressively used at mmWave and sub-THz frequencies due to the high front-end power consumption. A key challenge for DRX at these frequencies is blockage-induced link outages: a UE will likely need to track many directional links to ensure reliable multi-connectivity, thereby increasing the power consumption. In this paper, we explore bandit algorithms for link tracking in connected mode DRX that reduce power consumption by tracking only a fraction of the available links, but without adversely affecting the outage and throughput performance. Through detailed, system level simulations at 28 GHz (5G) and 140 GHz (6G), we observe that even sub-optimal link tracking policies can achieve considerable power savings with relatively little degradation in outage and throughput performance, especially with digital beamforming at the UE. In particular, we show that it is feasible to reduce power consumption by 75% and still achieve up to 95% (80%) of the maximum throughput using digital beamforming at 28 GHz (140 GHz), subject to an outage probability of at most 1%.