Sunlight exposure is a control of long-term plastic fate in the environment that converts plastic into oxygenated products spanning the polymer, dissolved, and gas phases. However, our understanding of how plastic formulation influences the amount and composition of these photoproducts remains incomplete. Here, we characterized the initial formulations and resulting dissolved photoproducts of four single-use consumer polyethylene (PE) bags from major retailers and one pure PE film. Consumer PE bags contained 15–36% inorganic additives, primarily calcium carbonate (13–34%) and titanium dioxide (TiO2; 1–2%). Sunlight exposure consistently increased production of dissolved organic carbon (DOC) relative to leaching in the dark (3- to 80-fold). All consumer PE bags produced more DOC during sunlight exposure than the pure PE (1.2- to 2.0-fold). The DOC leached after sunlight exposure increasingly reflected the 13C and 14C isotopic composition of the plastic. Ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry revealed that sunlight exposure substantially increased the number of DOC formulas detected (1.1- to 50-fold). TiO2-containing bags photochemically degraded into the most compositionally similar DOC, with 68–94% of photoproduced formulas in common with at least one other TiO2-containing bag. Conversely, only 28% of photoproduced formulas from the pure PE were detected in photoproduced DOC from the consumer PE. Overall, these findings suggest that plastic formulation, especially TiO2, plays a determining role in the amount and composition of DOC generated by sunlight. Consequently, studies on pure, unweathered polymers may not accurately represent the fates and impacts of the plastics entering the ocean.

Road asphalt is comprised of aggregate (rocks) mixed with a binder composed of high-boiling petroleum-derived compounds, which have been thought to be relatively inert (unreactive) and thus leach small amounts of polyaromatic hydrocarbons (PAHs) into water from the built environment. However, recent studies have demonstrated that petroleum readily undergoes photooxidation and generates water-soluble oxygencontaining hydrocarbons. Therefore, here, we investigate the effects of solar irradiation on an asphalt binder. Upon irradiation in a photooxidation microcosm, thin films of the asphalt binder produce abundant oil-and water-soluble oxygenated hydrocarbons, which we hypothesize are also leached from roads and highways through photooxidation reactions. Ultrahigh-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) enables extensive compositional characterization of the virgin asphalt binder, irradiated asphalt binder, and the water-soluble photoproducts. The results reveal the production of water-soluble species that resemble the molecular composition of petroleum-derived dissolved organic matter, including abundant hydrocarbons and Scontaining species with up to 18 oxygen atoms. The results also confirm photo-induced oxidation, fragmentation, and potentially polymerization as active processes involved in the production of water-soluble organic pollutants from asphalt.

Recent advances in instrumentation for high-field Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) have enabled access to ∼70 000 unique molecular formulas in broadband mass spectral characterization of unfractionated/whole asphaltenes. The results accumulated over a decade highlight the need for an asphaltene molecular model that acknowledges the coexistence of (1) monofunctional and polyfunctional species; (2) island and archipelago structural motifs; and (3) heteroatom-depleted/highly aromatic compounds, as well as atypical species with low aromaticity but increased heteroatom content. Collectively, results from FT-ICR MS, preparatory-scale separations (extrography/interfacial material), gel permeation chromatography, precipitation behavior in heptane:toluene, thermal decomposition, and aggregate microstructure by atomic force microscopy (among other techniques), suggest that the strong aggregation of asphaltenes results from the synergy between several intermolecular forces: π-stacking, hydrogen bonding, London forces, and acid/base interactions. This review presents general features of asphaltene molecular composition reported over the past five decades. We focus on mass spectrometry characterization and expose the reasons why early results supported the dominance of single-core motifs. Then, the discussion shifts to recent advances in instrumentation for high-field FT-ICR MS, which have enabled the detection of thousands of species in asphaltene samples, whose molecular composition and fragmentation behavior in ultrahigh vacuum agree with the coexistence of single-core and multicore structural motifs. Furthermore, evidence that highlights the limitations of commercially available/custom-built ion sources and selective ionization effects is presented. Consequently, the limitations require separations (e.g., chromatography, extrography) to gain more-comprehensive molecular-level insights into the composition of these complex organic mixtures. The final sections present evidence for the role of aggregation in selective ionization and suggest that advanced characterization by both thermal desorption/decomposition and liquid chromatography with online FT-ICR MS detection can be employed to mitigate the effects of aggregation and provide unique insights in molecular composition/structure.

Asphaltenes are high-boiling and recalcitrant compounds that are generally minor components of crude oil (∼0.1–15.0 wt %) but dominate the composition of heavily weathered spilled petroleum. These solid residues exhibit a high structural complexity, comprised of polycyclic aromatic hydrocarbons (PAHs) that are a mixture of single-core (island) and multicore (archipelago) structural motifs. The mass fraction of each motif is sample-dependent. Thus, knowledge of a potential structural dependence (single- versus multicore) on the production of water-soluble species from asphaltene samples is key to understanding the contribution of photochemically generated dissolved organic matter from oil spills. In this work, asphaltene samples with enriched mass fractions of either island (single-core) or archipelago (multicore) structural motifs are photo-oxidized on artificial seawater by the use of a solar simulator. Molecular characterization of oil- and water-soluble photoproducts, conducted by Fourier transform ion cyclotron resonance mass spectrometry, reveals that island motifs exhibit very limited production of water-soluble species, and their oil-soluble products reflect the molecular composition of the starting material. Conversely, archipelago motifs yield a water-soluble compositional continuum of O x , S x O y , and N x O y containing hydrocarbons species that exhibit the typical molecular fingerprint of dissolved organic matter (DOM). The lower carbon number and aromaticity of the archipelago-derived asphaltene photoproducts suggest the occurrence of photofragmentation (or photolysis) reactions. To investigate the possibility of the opposite reaction (photopolymerization), the photo-oxidation of small PAHs isolated from a low-boiling petroleum distillation cut was also performed. It yielded water-soluble compounds with carbon number and aromaticity up to 2-fold higher than the starting material, strongly suggesting that polymerization (addition reactions) occurs. Collectively, the results indicate that the presence of archipelago motifs and the occurrence of cracking/polymerization reactions are central in the production of dissolved organic matter from fossil fuels.

We present a solid-phase extraction method followed by derivatization with a charged tag to characterize ketone/aldehyde-containing functionalities (proposed photo-oxidation transformation products) in weathered petroleum by Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS). A photo-oxidation-only microcosm mimics solar irradiation of crude oil in the environment after an oil spill. A biodegradation-only microcosm enables independent determination as to which of the two weathering processes contributes to the formation of oil-soluble ketone/aldehyde species. Results confirm that photo-oxidation produces ketones/aldehydes in crude oil when exposed to solar radiation in laboratory experiments, whereas biodegraded oil samples do not produce ketone/aldehyde compounds. Field samples collected after different time periods and locations after the Deepwater Horizon oil spill are also shown to contain ketones/aldehydes, and comparison of field and photo-oxidation-only microcosm transformation products reveal remarkable similarity. These results indicate that the photo-oxidation microcosm comprehensively represents ketone/aldehyde-formation products in the field, whereas the biodegradation microcosm does not. Solid-phase extraction coupled with derivatization leads to selective identification of ketone/aldehyde species by MS. Although improved dynamic range and slightly reduced mass spectral complexity is achieved by separation/derivatization, comprehensive molecular characterization still requires mass resolving power and mass accuracy provided by FT-ICR MS.

Here, we describe three separations that can help overcome selective ionization in the analysis of petroleum samples.

Nickel (Ni)-impregnated metal oxide catalysts, Ni/CeZrOx, Ni/ZrO2, and Ni/CeO2, were investigated to maximize energy recovery and reduce char yield during catalytic hydrothermal liquefaction (CHTL) of food waste.

A recently developed extrography separation method fractionates petroleum asphaltenes based on their ionization efficiency, which correlates with polarity, aggregation tendency, and asphaltene structure (single-core or island versus multicore or archipelago). Archipelago asphaltenes were recently demonstrated to coexist with island structures in a variety of petroleum samples; however, archipelago compounds ionize much less efficiently than island compounds, making the former difficult to observe by mass spectrometry without prior separation. Highly processed coal-derived asphaltenes have been studied previously to reveal only small, single-core structure asphaltenes; however, the structure(s) of asphaltenes from unaltered coal extracts has not been extensively studied. Thus, this work focuses on the application of the extrography separation to an unaltered Illinois coal No. 6 asphaltene extract to reveal the coexistence of island and archipelago structural motifs by positive-ion (+) atmospheric pressure photoionization (APPI) Fourier transform ion cyclotron resonance mass spectrometry. Asphaltenes from a Wyoming crude oil sample are also characterized for comparison with coal asphaltenes. The results reveal that Wyoming crude oil asphaltenes contain mainly island species, whereas coal asphaltenes contain archipelago and island compounds with high oxygen content. The structural analysis is enabled by a new "multinotch" stored-waveform inverse Fourier transform isolation, which selectively isolates high-aromaticity precursor ions at each of several nominal mass ranges prior to fragmentation by infrared multiphoton dissociation, and enables unambiguous determination of island versus archipelago species in samples that contain compounds with high and low aromaticity. The more polarizable fractions from each asphaltene sample reveal low-aromaticity polyfunctional oxygenated species, with a solubility behavior consistent with asphaltenes but a compositional range typical of maltenes. These atypical asphaltene species, which ionize poorly, are hypothesized to participate in multiple hydrogen bonding interactions and thus exhibit strong adsorption on polar stationary phases such as SiO 2 . Furthermore, these polarizable polyfunctional species ionize preferentially as protonated cations by (+) APPI, accounting for their capability to hydrogen-bond in solution. Collectively, the results demonstrate the existence of archipelago structures in both coal and petroleum asphaltenes, along with polyoxygenated species with low aromaticity that behave like asphaltenes in terms of solubility, because they can establish stronger intermolecular forces such as hydrogen bonding.