No abstract

We modified poly(vinylidene fluoride) (PVDF) membranes with a polydopamine (PDA) coating for photocatalytic membrane reactor application with appropriate UV resistance and studied the effects of the PDA coating conditions (i.e., coating time and dopamine concentration) and UV irradiation time on the modified PVDF membrane properties. The PVDF membrane that was surface‐coated with the appropriate dopamine solution concentration and coating time played a key role in controlling the membrane properties and in protecting the modified membrane against UV radiation. The optimization of the coating condition not only completely protected the modified membrane from free‐radical attack initiated through UV irradiation but also improved the membrane hydrophilicity, antifouling properties, filtration performance, and mechanical strength of the membrane. UV irradiation of the membrane that was surface‐coated with a high‐concentration dopamine solution for a long coating time resulted in a higher mechanical strength than that of the membrane without the application of UV irradiation. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47312.

Composite ultrafiltration membranes were successfully fabricated by blending a nonionic surfactant and inorganic nanoparticles via a nonsolvent‐induced phase separation (NIPS) method. Brij35 was used as the nonionic surfactant and silica (SiO2) nanoparticles from rice husk ash, a low cost and widely available material, were used as the inorganic nanoparticles. The synergetic effect of both additives was used to tailor the membrane structure and properties because the selected additives showed completely different or, in some cases, the opposite effect on the membrane properties and structure. The combined effects of Brij and SiO2 resulted in a membrane with a noticeable improvement in membrane overall performance including pure water permeability, hydrophilicity, antifouling properties, long‐term stability, tensile strength, on the cost of a slight decrease in membrane elongation. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47737.

The removal of impurities from water or wastewater by the membrane filtration process has become more reliable due to good hydraulic performance and high permeate quality. The filterability of the membrane can be improved by having a material with a specific pore structure and good hydrophilic properties. This work aims at preparing a polyvinylidene fluoride (PVDF) membrane incorporated with phospholipid in the form of a 2-methacryloyloxyethyl phosphorylcholine, polymeric additive in the form of polyvinylpyrrolidone, and its combination with inorganic nanosilica from a renewable source derived from bagasse. The resulting membrane morphologies were analyzed by using scanning electron microscopy. Furthermore, atomic force microscopy was performed to analyze the membrane surface roughness. The chemical compositions of the resulting membranes were identified using Fourier transform infrared. A lab-scale cross-flow filtration system module was used to evaluate the membrane’s hydraulic and separation performance by the filtration of humic acid (HA) solution as the model contaminant. Results showed that the additives improved the membrane surface hydrophilicity. All modified membranes also showed up to five times higher water permeability than the pristine PVDF, thanks to the improved structure. Additionally, all membrane samples showed HA rejections of 75–90%.

Polydopamine has been widely used as an additive to enhance membrane fouling resistance. This study reports the effects of two-step dopamine-to-polydopamine modification on the permeation, antifouling, and potential anti-UV properties of polyethersulfone (PES)-based ultrafiltration membranes. The modification was performed through a two-step mechanism: adding the dopamine additive followed by immersion into Tris-HCl solution to allow polymerization of dopamine into polydopamine (PDA). The results reveal that the step of treatment, the concentration of dopamine in the first step, and the duration of dipping in the Tris solution in the second step affect the properties of the resulting membranes. Higher dopamine loadings improve the pure water flux (PWF) by more than threefold (15 vs. 50 L/m2·h). The extended dipping period in the Tris alkaline buffer leads to an overgrowth of the PDA layer that partly covers the surface pores which lowers the PWF. The presence of dopamine or polydopamine enhances the hydrophilicity due to the enrichment of hydrophilic catechol moieties which leads to better anti-fouling. Moreover, the polydopamine film also improves the membrane resistance to UV irradiation by minimizing photodegradation’s occurrence.

This study reports the development of bio-based adsorbent by utilizing coffee endocarp (CE) waste as a raw material for lead (Pb) removal from liquid wastewater. The effect of NaOH and HCl as activation precursors on the characteristics and performance of the resulting adsorbents was investigated. The prepared adsorbents were characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray fluorescence (XRF) and Surface Area Analyzer (SAA). The characterization results confirm the positive role of the activation by either NaOH or HCl in enhancing the surface properties of the resulting adsorbents. The chemical activations removed most of impurities leading to smoother surface, pore size enlargement and enhanced surface area to pore volume ratio, which result in an enhanced adsorption capacity and Pb removal efficiency. The raw adsorbent shows 57.7% of Pb removal efficiency and sorption capacity of 174.4 mg/g. On the other hand, after the chemical treatment using HCl and NaOH, the Pb removal efficiencies increased up to 63.9% and 89.86%, with adsorption capacity of 193 and 271.58 mg/g, respectively. Though both activated sorbents demonstrate better adsorption performance compared to the non-activated CE, overall results reveal that the NaOH-activated sorbent offers better characteristic and performance than the HCl-activated sorbent.

This paper reports the application of silica derived from natural biomasses of rice husk and bagasse ashes as membrane modifying agents. The modification was conducted on poly(ether sulfone) (PES) membrane by blending the silica into the dope solution. The modification was aimed to improve the structure and hydraulic performance of the resulting PES membrane. The effects of silica addition to the membrane system were evaluated through the analysis of change in chemical structure using ATR-FTIR, surface morphological change using AFM, and surface hydrophilicity using water contact angle measurement. SEM and AFM images show the silica loading significantly affects the membranes morphologies. Silica loading also promotes hydrophilic property as shown by the decrease in water contact angles from 82° to 52–60° due to the presence of polar groups in some residual silica in the membrane matrix. Silica blending also leads to the formation of membranes with higher permeability of up to three folds but lower humic acid rejection (78–62%). The findings indicate the role of silica to enhance the membrane pore size. The ability of membrane to reject humic acid (of 0.8 nm minimum diameter) indicating that the resulting membranes were in between tight ultrafiltration and nanofiltration type. Nonetheless, applying too-high silica concentration decreased the humic acid rejection most likely due to over enlargement of the membrane pore size.

No abstract