A molybdate-reducing bacterium has been locally isolated. The bacterium reduces molybdate or Mo(6+) to molybdenum blue (molybdate oxidation states of between 5+ and 6+). Different carbon sources such as acetate, formate, glycerol, citric acid, lactose, fructose, glucose, mannitol, tartarate, maltose, sucrose, and starch were used at an initial concentration of 0.2% (w/v) in low phosphate media to study their effect on the molybdate reduction efficiency of bacterium. All of the carbon sources supported cellular growth, but only sucrose, maltose, glucose, and glycerol (in decreasing order) supported molybdate reduction after 24 h of incubation. Optimum concentration of sucrose for molybdate reduction is 1.0% (w/v) after 24 h of static incubation. Ammonium sulfate, ammonium chloride, valine, OH-proline, glutamic acid, and alanine (in the order of decreasing efficiency) supported molybdate reduction with ammonium sulfate giving the highest amount of molybdenum blue after 24 h of incubation at 0.3% (w/v). The optimum molybdate concentration that supports molybdate reduction is between 15 and 25 mM. Molybdate reduction is optimum at 35 degrees C. Phosphate at concentrations higher than 5 mM strongly inhibits molybdate reduction. The molybdenum blue produced from cellular reduction exhibits a unique absorption spectrum with a maximum peak at 865 nm and a shoulder at 700 nm. The isolate was tentatively identified as Serratia marcescens Strain Dr.Y6 based on carbon utilization profiles using Biolog GN plates and partial 16s rDNA molecular phylogeny.

BackgroundBiodegradation of hydrocarbons in Antarctic soil has been reported to be achieved through the utilisation of indigenous cold-adapted microorganisms. Although numerous bacteria isolated from hydrocarbon-contaminated sites in Antarctica were able to demonstrate promising outcomes in utilising hydrocarbon components as their energy source, reports on the utilisation of hydrocarbons by strains isolated from pristine Antarctic soil are scarce. In the present work, two psychrotolerant strains isolated from Antarctic pristine soil with the competency to utilise diesel fuel as the sole carbon source were identified and optimised through conventional and response surface method.ResultsTwo potent hydrocarbon-degraders (ADL15 and ADL36) were identified via partial 16S rRNA gene sequence analysis, and revealed to be closely related to the genus Pseudomonas and Rhodococcus sp., respectively. Factors affecting diesel degradation such as temperature, hydrocarbon concentration, pH and salt tolerance were studied. Although strain ADL36 was able to withstand a higher concentration of diesel than strain ADL15, both strains showed similar optimal condition for the cell’s growth at pH 7.0 and 1.0% (w/v) NaCl at the conventional ‘one-factor-at-a-time’ level. Both strains were observed to be psychrotrophs with optimal temperatures of 20 °C. Qualitative and quantitative analysis were performed with a gas chromatograph equipped with a flame ionisation detector to measure the reduction of n-alkane components in diesel. In the pre-screening medium, strain ADL36 showed 83.75% of n-dodecane mineralisation while the reduction of n-dodecane by strain ADL15 was merely at 22.39%. The optimised condition for n-dodecane mineralisation predicted through response surface methodology enhanced the reduction of n-dodecane to 99.89 and 38.32% for strain ADL36 and strain ADL15, respectively.ConclusionsStrain ADL36 proves to be a better candidate for bioaugmentation operations on sites contaminated with aliphatic hydrocarbons especially in the Antarctic and other cold regions. The results obtained throughout strongly supports the use of RSM for medium optimisation.

Microplastic pollution is globally recognised as a serious environmental threat due to its ubiquitous presence related primarily to improper dumping of plastic wastes. While most studies have focused on microplastic contamination in the marine ecosystem, microplastic pollution in the soil environment is generally little understood and often overlooked. The presence of microplastics affects the soil ecosystem by disrupting the soil fertility and quality, degrading the food web, and subsequently influencing both food security and human health. This study evaluates the growth and biodegradation potential of the Antarctic soil bacteria Pseudomonas sp. ADL15 and Rhodococcus sp. ADL36 on the polypropylene (PP) microplastics in Bushnell Haas (BH) medium for 40 days. The degradation was monitored based on the weight loss of PP microplastics, removal rate constant per day (K), and their half-life. The validity of the PP microplastics’ biodegradation was assessed through structural changes via Fourier transform infrared spectroscopy analyses. The weight loss percentage of the PP microplastics by ADL15 and ADL36 after 40 days was 17.3% and 7.3%, respectively. The optimal growth in the BH media infused with PP microplastics was on the 40th and 30th day for ADL15 and ADL36, respectively. The infrared spectroscopic analysis revealed significant changes in the PP microplastics’ functional groups following the incubation with Antarctic strains.

Rhodococci are renowned for their great metabolic repertoire partly because of their numerous putative pathways for large number of specialized metabolites such as biosurfactant. Screening and genome-based assessment for the capacity to produce surface-active molecules was conducted on Rhodococcus sp. ADL36, a diesel-degrading Antarctic bacterium. The strain showed a positive bacterial adhesion to hydrocarbon (BATH) assay, drop collapse test, oil displacement activity, microplate assay, maximal emulsification index at 45% and ability to reduce water surface tension to < 30 mN/m. The evaluation of the cell-free supernatant demonstrated its high stability across the temperature, pH and salinity gradient although no correlation was found between the surface and emulsification activity. Based on the positive relationship between the assessment of macromolecules content and infrared analysis, the extracted biosurfactant synthesized was classified as a lipopeptide. Prediction of the secondary metabolites in the non-ribosomal peptide synthetase (NRPS) clusters suggested the likelihood of the surface-active lipopeptide production in the strain’s genomic data. This is the third report of surface-active lipopeptide producers from this phylotype and the first from the polar region. The lipopeptide synthesized by ADL36 has the prospect to be an Antarctic remediation tool while furnishing a distinctive natural product for biotechnological application and research.

Nitrophenols (NPs) is one the most widely used chemical compounds due to their mass usage in agricultural industry, medical applications and domestic activities. However, due to their intensive application in these industries, many reports have been arising in regard to the toxicity effects towards human health and the environments. It has been acknowledged that various microbial species were able to utilize the NPs as their sustenance are being exploited for their mechanistic approach. Current research has been focused on the isolation of those strains and the study of microbial species of potential environmental and biological impact. This review highlights on one of the examples of polynitrophenols - 2,4-dinitrophenol (2,4-DNP), their usage in recent industry, implications of 2,4-DNP to the human health and environmental niche, and role of 2,4-DNP-utilising microbes in current bioremediation.

This mini review aims to provide an overview of petroleum hydrocarbons degradation by Bacillus species. The first half of the scientific assessment is focusing on the impact of usage of petroleum hydrocarbons such as diesel fuels towards organisms and the surrounding environments. The other section of the literature collection discusses on the microbial remediation of this recalcitrant compounds by microbial species with special highlight on the genus Bacillus. This short evaluation will improve our present comprehension of bacterial degradation of petroleum hydrocarbons and their respective derivatives while providing an insight on the role of Bacillus species in microbial remediation communities.

Polystyrene (PS) and microplastic production pose persistent threats to the ecosystem. Even the pristine Antarctic, which is widely believed to be pollution-free, was also affected by the presence of microplastics. Therefore, it is important to comprehend the extent to which biological agents such as bacteria utilise PS microplastics as a carbon source. In this study, four soil bacteria from Greenwich Island, Antarctica, were isolated. A preliminary screening of the isolates for PS microplastics utilisation in the Bushnell Haas broth was conducted with the shake-flask method. The isolate AYDL1 identified as Brevundimonas sp. was found to be the most efficient in utilising PS microplastics. An assay on PS microplastics utilisation showed that the strain AYDL1 tolerated PS microplastics well under prolonged exposure with a weight loss percentage of 19.3% after the first interval (10 days of incubation). Infrared spectroscopy showed that the bacteria altered the chemical structure of PS while a deformation of the surface morphology of PS microplastics was observed via scanning electron microscopy after being incubated for 40 days. The obtained results may essentially indicate the utilisation of liable polymer additives or “leachates” and thus, validate the mechanistic approach for a typical initiation process of PS microplastics biodeterioration by the bacteria (AYDL1)—the biotic process.

Four preliminary screening methods for biosurfactant synthesis - drop collapse assay, oil displacement activity, microplate assay and emulsification index (E24) were compared and evaluated for their reliability and ease of use. All screening methods showed positive indications for the synthesis of biological surface-active agents. Nevertheless, partial collapse of the supernatant and low emulsification index (E24) of Pseudomonas sp. might signify a low production of biosurfactants. Based on our observation, both drop collapse and oil displacement assay is the fastest, easiest and most reliable analytical routine to be suggested to screen for biosurfactant-producing strains. In the extent for a high throughput screening (HTS), drop collapse assay is the best method for an accurate screening of biosurfactant producers.