No abstract

No abstract

Poly(ethylene oxide) (PEO)/clay nanocomposites were prepared using a solution intercalation method. The organoclay (Nanocore I30E) used for nanocomposite synthesis was basically an octadecylammonium salt of montmorillonite clay prepared using an ion exchange method. Nanocomposite-based solid polymer electrolytes were prepared using LiBF 4 . The nanocomposite structures were characterised using wide-angle X-ray diffraction. The crystallisation behaviour and thermal properties were studied using differential scanning calorimetry. It was found that the crystallinity of the composite electrolytes decreases with increasing clay concentration up to 7.5 wt% and then increases with a further increase in clay concentration. The trend is different from that observed in PEO/clay nanocomposites without lithium salt where the crystallinity gradually decreases with increasing clay concentration. The solid polymer electrolyte samples were evaluated using an alternating current impedance analyser. A considerable increase in room temperature conductivity was observed at the optimum clay concentration. The conductivity decreases beyond the optimum clay concentration.

A novel method utilizing hydrocolloids to prepare nicely shaped spheres of metal-organic frameworks (MOFs) has been developed. Microcrystalline CPO-27-Ni particles are dispersed in either alginate or chitosan solutions, which are added dropwise to solutions containing, respectively, either divalent group 2 cations or base that act as gelling agents. Well-shaped spheres are immediately formed, which can be dried into spheres containing mainly MOF (>95 wt %). The spheronizing procedures have been optimized with respect to maximum specific surface area, shape, and particle density of the final sphere. At optimal conditions, well-shaped 2.5-3.5 mm diameter CPO-27-Ni spheres with weight-specific surface areas <10 % lower than the nonformulated CPO-27-Ni precursor, and having sphere densities in the range 0.8 to 0.9 g cm(-3) and particle crushing strengths above 20 N, can be obtained. The spheres are well suited for use in fixed-bed catalytic or adsorption processes.