In this article, the melt spinning behavior of poly(4-methyl-1-pentene) (PMP) hollow fibers (HF) is examined. The melt spinning trials are carried out on a pilot scale melt spinning plant with different settings while a 10-hole 2cshaped spinneret is used. It is found that the winding speed mainly affects the outer fiber diameter. The influence of different melt spinning parameters is investigated, in particular temperatures, take-up velocities, and the use of quench air. For this purpose, the shape and crystalline structure of the fibers are analyzed using a light microscope, a scanning electron microscope, and wide-angle X-ray scattering. The shape of the fibers is mainly influenced by the temperature settings in the melt spinning process. As a reasonable lower limit, a melt spinning temperature of 280 C is identified. Concerning the crystallinity, a saturation going along with a slight reduction of the polymer chain orientation is observed at elevated take-up velocities.
Designing hollow fiber (HF) membrane modules occupies one of the key positions in the development of efficient membrane processes for various purposes. In developing HF membrane modules, it is very important to have a uniform HF distribution and flow mixing in the shell side to significantly improve mass transfer and efficiency. This work suggests the application of different textile 3D HF structures (braided hoses and woven tape fabrics). The 3D structures consist of melt-spun, dense HFs based on poly(4-methyl-1-pentene) (PMP). Since the textile processing of HFs can damage the wall of the fiber or close the fiber bore, the membrane properties of the obtained structures are tested with a CO2/CH4 mixture in the temperature range of 0 to 40 °C. It is shown that HFs within the textile structure keep the same transport and separation characteristics compared to initial HFs. The mechanical properties of the PMP-based HFs allow their use in typical textile processes for the production of various membrane structures, even at a larger scale. PMP-based membranes can find application in separation processes, where other polymeric membranes are not stable. For example, they can be used for the separation of hydrocarbons or gas mixtures with volatile organic compounds.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.