We study the effect of carbon to oxygen ratio (C/O) on the electrical resistance of functionalized graphene sheets prepared by thermal exfoliation and reduction of graphite oxide at various temperatures. Using a 2-probe technique in conjunction with Kelvin probe force microscopy, we observe a transition from high-resistance (>400 kΩ/sq) nonlinear current/voltage characteristics at low C/O to low-resistance (<10 kΩ/sq) linear behavior at high C/O, indicating a transition from hopping to diffusive electron transport. Simultaneously, the metal-graphene contacts change from high-resistance Schottky-type behavior to nearly non-invasive metal-metal contact characteristics.

Graphene is a highly attractive candidate for implementation as electrodes in next-generation large-area optoelectronic devices thanks to its high electrical conductivity and high optical transparency. In this study, we show all-solution-processed quantum dot-based lightemitting devices (QD-LEDs) using graphene mono-and multilayers as transparent electrodes. Here, the effect of the number of graphene layers (up to three) on the QD-LEDs performance was studied. While the implementation of a second graphene layer was found to reduce the turn-on voltage from 2.6 to 1.8 V, a third graphene layer was observed to increase the turn-on voltage again, which is attributed to an increased roughness of the graphene layer stack.