One of the major causes of premature failure in asphalt pavements is moisture damage. Asphalt mixtures designed without considering climate impacts may suffer from durability problems caused by movement of water inside the asphalt mixture. Rolling traffic over wet pavement builds up pore pressure in the mixture, which will consequently accelerate deterioration. The objective of the study was to assess the moisture damage to asphalt concrete mixtures by means of complex modulus testing of dry and moisture-conditioned asphalt specimens with various mixture compositions. The asphalt mixtures were conditioned with the Moisture Induced Sensitivity Tester (MIST), which aims to replicate pore pressure in field conditions. The results showed a decline in stiffness modulus and a reduction in elastic properties after MIST conditioning. In addition, the results indicated that binder content and air void content had a significant influence on the reduction in stiffness. To capture the relationship between air void content, binder content, and the reduction in stiffness, a relationship was developed and validated with measurements on cores extracted in the field.

Moisture in unbound layers and temperature in asphalt layers affect the structural response of pavements, such as the tensile strain at the bottom of asphalt concrete layers. Previous studies have proposed relationships for estimating tensile strain at the bottom of an asphalt layer from Falling Weight Deflectometer (FWD) surface deflection measurements. These relationships have been developed based on theoretical calculations of strains and surface deflections. The main objective of this study was to evaluate these relationships using measured FWD deflections and tensile strains at the bottom of asphalt concrete layers. Three instrumented test structures were considered in the study. FWD and strain measurements were conducted at varying groundwater levels in the subgrade and temperatures in the asphalt concrete layers. The results revealed that the relationships have poor agreement with measured strains. A new relationship is proposed that incorporates the volumetric water content in the subgrade and the temperature in the asphalt layers in addition to the surface FWD deflections.