Layer-bound arrays of polygonal compaction faults have long been considered as important migration routes for hydrocarbon fluids leaking to the surface across thick shale sequences. A classic example is the deep offshore of the Lower Congo Basin where numerous fluid-venting structures are present above a Pliocene polygonal fault system. In this paper we present a detailed seismic analysis of a newly recognised system of Quaternary-aged Linear Chimneys and their intersection geometries with pre-existing Pliocene-aged polygonal faults (PF). Most (73%) of the 209 chimneys analysed intersect the lower portions of polygonal faults and almost half of these are rooted in strata below the PF interval. This indicates that fluid (in this case gas) migrated vertically, cross-cutting polygonal faults as it ascended through the tier. This is a strong indicator that PFs did not provide viable migration pathways otherwise chimneys would terminate at the upper tip of the fault, which would be the most likely migration exit point. Only twice in the whole system of Linear Venting Systems did this occur. A sub-set of chimneys stems from or above PF planes but these are restricted to either the lower footwall or from the apex area of hanging wall. At best they are evidence of fluids migrating up the lower part of polygonal faults and exiting deep within the tier, then migrating through most of the tier in their own vertical leakage vents. These results provide strong indicators that at least within this part of the Lower Congo Basin polygonal faults were the least effective/favoured migration pathway and that it was more energy-efficient for migrating gas to hydrofracture its fine-grained overburden than to re-open polygonal faults.Key Words: Linear chimneys; hydrocarbon; polygonal faults (PFs); permeability; methane-related carbonates; Lower Congo Basin; Angola. Résumé : La perméabilité des failles polygonales déduite de la géométrie de leurs intersections avec des cheminées linéaires : une étude de cas dans le bassin du Bas-Congo.-Les réseaux de "failles polygonales" (failles de compaction restreintes à un intervalle stratigraphique) ont été longtemps considérés comme d'importants chemins pour la migration vers la surface des hydrocarbures à travers d'épaisses séries argileuses. Un exemple classique est fourni par l'offshore profond du bassin du Bas-Congo où de nombreuses structures d'échappement de fluides sont présentes au-dessus d'un système de failles polygonales affectant l'intervalle pliocène. Ce papier présente l'analyse sismique détaillée d'un système récemment reconnu de cheminées linéaires d'âge quaternaire, ainsi que de la géométrie de leurs intersections avec des failles polygonales pliocènes (donc préexistantes). La plupart (73 %) des 209 cheminées analysées recoupent le mur des failles polygonales, et près de la moitié d'entre elles s'enracinent dans l'intervalle sous-jacent à l'intervalle faillé. Cette disposition indique que le fluide (gaz en l'occurrence) a migré verticalement, recoupant les failles pol...
Abstract. A new type of gas chimney exhibiting an unconventional linear planform is found. These chimneys are termed Linear Chimneys, which have been observed in 3-D seismic data offshore of Angola. Linear Chimneys occur parallel to adjacent faults, often within preferentially oriented tier-bound fault networks of diagenetic origin (also known as anisotropic polygonal faults, PFs), in salt-deformational domains. These anisotropic PFs are parallel to salt-tectonic-related structures, indicating their submission to horizontal stress perturbations generated by the latter. Only in areas with these anisotropic PF arrangements do chimneys and their associated gas-related structures, such as methane-derived authigenic carbonates and pockmarks, have linear planforms. In areas with the classic isotropic polygonal fault arrangements, the stress state is isotropic, and gas expulsion structures of the same range of sizes exhibit circular geometry. These events indicate that chimney's linear planform is heavily influenced by stress anisotropy around faults. The initiation of polygonal faulting occurred 40 to 80 m below the present day seafloor and predates Linear Chimney formation. The majority of Linear Chimneys nucleated in the lower part of the PF tier below the impermeable portion of fault planes and a regional impermeable barrier within the PF tier. The existence of polygonal fault-bound traps in the lower part of the PF tier is evidenced by PF cells filled with gas. These PF gas traps restricted the leakage points of overpressured gas-charged fluids along the lower portion of PFs, hence controlling the nucleation sites of chimneys. Gas expulsion along the lower portion of PFs preconfigured the spatial organisation of chimneys. Anisotropic stress conditions surrounding tectonic and anisotropic polygonal faults coupled with the impermeability of PFs determined the directions of long-term gas migration and linear geometries of chimneys. Methane-related carbonates that precipitated above Linear Chimneys inherited the same linear planform geometry, and both structures record the timing of gas leakage and palaeo-stress state; thus, they can be used as a tool to reconstruct orientations of stress in sedimentary successions. This study demonstrates that overpressure hydrocarbon migration via hydrofracturing may be energetically more favourable than migration along pre-existing faults.
Abstract. The mechanisms that govern the vertical growth of seep carbonates were deciphered by studying the sedimentary architecture of a 15 m thick, 8 m wide column of limestone encased in deep-water marl in the middle Callovian interval of the Terres Noires Formation in the SE France Basin. The limestone body, also called “pseudobioherm”, records intense bioturbation, with predominant traces of the Thalassinoides/Spongeliomorpha suite, excavated by decapod crustaceans. Bioturbation was organized in four tiers. The uppermost tier, tier 1, corresponds to shallow homogenization of rather soft sediment. Tier 2 corresponds to pervasive burrows dominated by large Thalassinoides that were later passively filled by pellets. Both homogenized micrite and burrow-filling pellets are depleted in 13C
in the range from −5 ‰ to −10 ‰. Tier 3 is characterized by small Thalassinoides that have walls locally bored by Trypanites; the latter represent tier 4. The diagenetic cements filling the tier-3 Thalassinoides are arranged in two phases. The first cement generation constitutes a continuous rim that coats the burrow wall and has consistent δ13C values of approximately −8 ‰ to −12 ‰, indicative of bicarbonate originating from the anaerobic oxidation of methane. In contrast, the second cement generation is dominated by saddle dolomite precipitated at temperatures >80 ∘C, at a time when the pseudobioherm was deeply buried. The fact that the tubes remained open until deep burial means that vertical fluid communication was possible over the whole vertical extent of the pseudobioherm up to the seafloor during its active development. Therefore, vertical growth was fostered by this open burrow network, providing a high density of localized conduits through the zone of carbonate precipitation, in particular across the sulfate–methane transition zone. Burrows prevented self-sealing from blocking upward methane migration and laterally deflecting fluid flow. One key aspect is the geometric complexity of the burrows with numerous subhorizontal segments that could trap sediment shed from above and, hence, prevent their passive fill.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.