Arrays of nanowires are fabricated with alternating segments of the magnetostrictive alloy Fe1–xGax and Cu using electrochemical deposition in nanoporous anodic aluminium oxide (AAO) templates. The difficult nature of Ga‐alloy electrochemistry is overcome by controlling mass‐transfer and hydrodynamic conditions using novel rotating disk electrode templates to obtain highly uniform segment lengths throughout the arrays. Extensive structural characterization by XRD, EBSD and TEM reveals a strong <110> textured Fe1–xGax growth. Furthermore, using vibrating sample magnetometry (VSM), we demonstrate that control of magnetization reversal processes is possible once uniform aspect ratios are obtained for both the Fe–Ga and Cu segments.

No abstract

Articles you may be interested inEffect of carbon addition on the single crystalline magnetostriction of Fe-X ( X = Al and Ga) alloys Secondary recrystallization, crystallographic texture and magnetostriction in rolled Fe-Ga based alloys Texture and grain morphology dependencies of saturation magnetostriction in rolled polycrystalline Fe 83 Ga 17

High-entropy alloys (HEAs) containing multiple principle alloying elements exhibit unique properties so they are currently receiving great attention for developing innovative alloy designs. In FeCoNi-based HEAs, magnetic behaviors strongly depend on the addition of alloying elements, usually accompanied by structural changes. In this work, the effect of non-magnetic components on the ferromagnetic transition and magnetic behaviors in equiatomic FeCoNiCrX (X=Al, Ga, Mn and Sn) HEAs was investigated. Alloy ingots of nominal compositions of HEAs were prepared by arc melting and the button ingots were cut into discs for magnetic measurements as functions of magnetic field and temperature. The HEAs of FeCoNiCrMn and FeCoNiCrSn show typical paramagnetic behaviors, composed of solid solution FCC matrix, while the additions of Ga and Al in FeCoNiCr exhibit ferromagnetic behaviors, along with the coexistence of FCC and BCC phases due to spinodal decomposition. The partial phase transition in both HEAs with the additions of Ga and Al would enhance ferromagnetic properties due to the addition of the BCC phase. The saturation magnetization for the base alloy FeCoNiCr is 0.5 emu/g at the applied field of 20 kOe (TC = 104 K). For the HEAs of FeCoNiCrGa and FeCoNiCrAl, the saturation magnetization significantly increased to 38 emu/g (TC = 703 K) and 25 emu/g (TC = 277 K), respectively. To evaluate the possibility of solid solution FCC and BCC phases in FeCoNiCr-type HEAs, we introduced a parameter of valence electron concentration (VEC). The proposed rule for solid solution formation by the VEC was matched with FeCoNiCr-type HEAs.

No abstract