The concept of design space has been taking root as a foundation of in-process control strategies for biopharmaceutical manufacturing processes. During mapping of the process design space, the multidimensional combination of operational variables is studied to quantify the impact on process performance in terms of productivity and product quality. An efficient methodology to map the design space for a monoclonal antibody cell culture process is described. A failure modes and effects analysis (FMEA) was used as the basis for the process characterization exercise. This was followed by an integrated study of the inoculum stage of the process which includes progressive shake flask and seed bioreactor steps. The operating conditions for the seed bioreactor were studied in an integrated fashion with the production bioreactor using a two stage design of experiments (DOE) methodology to enable optimization of operating conditions. A two level Resolution IV design was followed by a central composite design (CCD). These experiments enabled identification of the edge of failure and classification of the operational parameters as non-key, key or critical. In addition, the models generated from the data provide further insight into balancing productivity of the cell culture process with product quality considerations. Finally, process and product-related impurity clearance was evaluated by studies linking the upstream process with downstream purification. Production bioreactor parameters that directly influence antibody charge variants and glycosylation in CHO systems were identified.
Protein A chromatography has become widely established for the preparative purification of mAbs (monoclonal antibodies). Low pH elution from Protein A columns followed by neutralization can often lead to precipitation of impurities in the product stream, leading to a visually turbid solution. Pretreatment of the cell culture harvest stream with an increased surface area of the depth filter was found to reduce the magnitude of this problem through exploitation of the adsorptive properties of harvest depth filters. However, this was not a complete solution. Clarification of this turbid product stream prior to the polishing chromatographic steps in the downstream process posed significant filtration challenges. Development of a staged filtration process with the use of low plugging glass fibre depth filters as the first stage prior to membrane filtration through an absolute pore size membrane is described. Finally, a cost calculation is used to drive the selection of the final filter train for this application. The results presented here are expected to have wide applicability in mAb downstream processing as well as for other turbid solutions encountered in the downstream processing of other biomolecules.
High throughput experimental strategies are central to the rapid optimization of biologics purification processes. In this work, we extend common high throughput technologies towards the characterization of a multi-column chromatography process for a monoclonal antibody (mAb). Scale-down strategies were first evaluated by comparing breakthrough, retention, and performance (yields and clearance of aggregates and host cell protein) across miniature and lab scale columns. The process operating space was then evaluated using several integrated formats, with batch experimentation to define process testing ranges, miniature columns to evaluate the operating space, and comparison to traditional scale columns to establish scale-up correlations and verify the determined operating space. When compared to an independent characterization study at traditional lab column scale, the high throughput approach identified the same control parameters and similar process sensitivity. Importantly, the high throughput approach significantly decreased time and material needs while improving prediction robustness. Miniature columns and manufacturing scale centerpoint data comparisons support the validity of this approach, making the high throughput strategy an attractive and appropriate scale-down tool for the formal characterization of biotherapeutic processes in the future if regulatory acceptance of the miniature column data can be achieved. Biotechnol. Bioeng. 2016;113: 1273-1283. © 2015 Wiley Periodicals, Inc.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.