As industrialization progresses, there is a large release of hazardous pollutants into the environment. These pollutants, which contain nitro compounds and organic dyes, are extremely dangerous due to their toxic and carcinogenic nature. An efficient, environmentally benign, and economical catalyst to degrade environmental pollutants or convert them into useful products has been of sustained interest in recent years. In this context, we report a simple and inexpensive combustion fabrication of NiCrFeO 4 using different fuels such as glycine, polyvinyl alcohol (PVA), and urea, showing tremendous catalytic and photocatalytic functionalities. Rietveld refinement and X-ray diffraction studies confirmed the formation of single-phase ferrites, with crystallite sizes ranging from 3.9 to 43.31 nm. The values of optical band gap, obtained from the diffused reflectance spectroscopy technique, lie in the visible region range (1.50–1.60 eV), and hence, all the synthesized ferrites can act as good photocatalysts in the presence of visible light. All the NCF nanocatalysts were utilized for the reduction of nitroarenes and photocatalytic degradation of various cationic (RhB and MB) and anionic (MO) dyes and their mixture. NCFP displayed excellent activity for the reduction and oxidation reactions owing to its large surface area and low optical band gap. Furthermore, the photo-oxidative degradation by NCFP was also enhanced due to its low recombination of charge carriers as confirmed by the photoluminescence (PL) spectroscopy. NCFP efficiently reduces nitrobenzene to aminobenzene with 95% yield using sodium borohydride as the reducing agent in methanol medium at RT in 10 min. The results of photocatalytic activity have shown that the degradation efficiency of NCFP follows the order RhB > MB > MO in their unitary solution. Furthermore, in the case of the mixture of dyes, NCFP showed enhanced photocatalytic degradation for cationic dyes (RhB and MB) compared to that of anionic dye (MO). From the performance point of view, this catalyst can be useful in industrial application because of its high stability, greater catalytic efficiency, and cost-effectiveness.

In the present paper, nanocrystalline samples of NiCrFeO4 were synthesized by the combustion method using different fuels such as glycine, urea, and poly(vinyl alcohol) and subjected to heat treatment at different temperatures of 600, 700, 800, and 1000 °C for 6 h. The formation of phases with highly crystalline structures was confirmed by XRD and Rietveld refinement analysis. The optical band gap of NiCrFeO4 ferrites lies in the visible range, making them suitable photocatalysts. BET analysis reveals that the surface area of the phase synthesized using PVA is much higher than that synthesized using other fuels at each sintering temperature. In addition, there is a significant decrease in the surface area with sintering temperature for the catalysts prepared using the fuels PVA and urea, while it almost remains constant in the case of glycine. Magnetic studies demonstrate the dependence of saturation magnetization on the nature of the fuel and on the sintering temperature; moreover, the coercivity and squareness ratio confirm the single domain nature of all the synthesized phases. We have also performed photocatalytic degradation of the highly toxic Rhodamine B (RhB) dye by employing all the prepared phases as photocatalysts using the mild oxidant H2O2. It is observed that the photocatalyst prepared using PVA as the fuel exhibited the best photocatalytic activity at all sintering temperatures. All the three photocatalysts prepared using different fuels showed a decrease in the photocatalytic activity with increasing sintering temperature. From the chemical kinetic point of view, the degradation of RhB by all the photocatalysts was found to follow pseudo-first-order kinetics.

No abstract

The present study reports the synthesis of nanocrystalline LaFe 0.5 Cr 0.5 O 3 via a solvent-free combustion method using glycine, poly(vinyl alcohol), and urea as fuels, with superior photocatalytic activity. Rietveld refinement and powder X-ray diffraction data of nanomaterials demonstrate the existence of an orthorhombic phase that corresponds to the Pbnm space group. The crystallite size of nanoperovskite samples lies in the range of 20.9−36.4 nm. The Brunauer−Emmett−Teller (BET) surface area of the LaFe 0.5 Cr 0.5 O 3 fabricated using urea is found to be higher than that of the samples prepared using other fuels. The magnetic measurements of all samples done using a SQUID magnetometer showed a dominant antiferromagnetic character along with some weak ferromagnetic interactions. The optical band gap of all nanosamples lies in the visible range (2−2.6 eV), making them suitable photocatalysts in visible light. Their use as a photocatalyst for the degradation of the rhodamine B dye (model pollutant) is studied, and it has been observed that the catalyst fabricated using urea shows excellent degradation efficiency for rhodamine B, i.e., 99% in 60 min, with high reusability up to five runs. Additionally, the degradation of other organic dyes such as methylene blue, methyl orange, and a mixture of these dyes (rhodamine B + methylene blue + methyl orange) is also investigated with the most active photocatalyst, i.e., LFCO-U, to check its versatility.

No abstract