Dalam suatu proyek kontruksi pondasi memiliki peranan yang sangat penting, ini dikarenakan pondasi adalah elemen pertama yang harus didirikan sebelum elemen lain terbentuk. Selain itu juga beban-beban bangunan yang ada diatasnya akan dipikul untuk selanjutnya diteruskan ke dasar tanah. Dalam pelaksanaanya perencana harus menghitung kapasitas kuat dukung tiang terlebih dahulu, supaya dapat menghasilkan bangunan yang kuat dan kokoh. Pada pelaksanaan proyek IPAL PT. United Tractors menggunakan jenis pondasi Bore Pile. Penulisan skripsi ini bermaksud untuk menghitung dan membandingkan kapasitas kuat dukung pondasi Bore Pile berdasarkan data SPT dan CPT. Metode perhitungan data SPT menggunakan metode Reese & O’Neil (1989), Reese & Wright (1977) dan Skempton dan data CPT menggunakan metode Bagemann dan deRuiter & Beringen. Metode penelitian yang digunakan adalah metode yang bersifat analisis kuantitatif. Data-data tersebut meliputi data uji tanah sondir, data SPT pada proyek IPAL PT. United Tractors, setelah data sekunder terkumpul maka akan dilakukan analisa perhitungan kapasitas kuat dukung pondasi Bore Pile (Qu) dengan cara statis dari hasil uji sondir dan SPT dengan berbagai metode dan berbagai ukuran diameter tiang sampai mendapat hasil. Hasil yang diperoleh dari analisa ini yaitu pada hasil perhitungan dari data CPT dengan diameter tiang 60 cm, perhitungan menggunakan metode Bagemann Qu = 738,77 kN lebih optimis dibandingkan dengan menggunakan metode deRuiter dan Beringen Qu = 587,9 kN. Sedangkan hasil perhitungan dari data SPT dengan menggunakan diameter tiang 60 cm metode Reese & Wright (1977) Qu = 1044,6 kN lebih optimis dibandingkan dengan menggunakan metode Reese & O’Neil (1989) Qu =749,98 kN dan Skempton Qu = 610,04 kN. Dari dua data tersebut perhitungan dengan menggunakan data SPT lebih baik dan juga lebih optimis dibandingkan dengan data CPT.
Pondasi tiang bor merupakan bagian dari struktur yang memberikan beban ke tanah dan batuan di bawahnya. Energi dukung beban yang diijinkan pondasi harus lebih besar dari beban yang bekerja pada pondasi, baik statis maupun dinamis, susut yang diakibatkan oleh beban tidak boleh melewati susut yang ditetapkan. Hasil dan tinjauan penelitian adalah perhitungan energi dukung pondasi tiang bor dengan metode Mayerhoff diameter 100 cm sebesar 25257,54 kN, dan diameter 120 cm sebesar 34439 kN sedangkan dengan metode Reese & Wright pondasi diameter 100 cm sebesar 16329,12 kN, dan diameter 120 cm sebesar 19876,32 kN, dan yang terakhir dengan menggunakan metode O’Neil dan Reese pondasi diameter 100 cm sebesar 18025,03 kN, dan diameter 120 cm sebesar 22318,3kN. Dari hasil pembahasan tiga metode daya dukung tersebut didapatkan nilai Qu optimis dari metode mayerhoff. Sedangkan untuk pembahasan penurunan pondasi bored pile metode Vesic diameter 100 cm sebesar 59,21 < 100 mm, dan diameter 120 cm sebesar 97,5 120 mm. Setelah perhitungan penurunan tersebut selesai dinyatakan bahwa penurunan pondasi bored pile yang terjadi di kedua diameter bored pile 100 cm dan 120 cm pada titik aman.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.