The impacts of halide and nonhalide sources of guanidinium cations, including guanidinium chloride (GCl) ((NH2)3CCl) and guanidinium thiocyanate (GTC) ((NH2)3CSCN), are comparatively analyzed on the structural, morphological, and photophysical properties of (CsMAFA)PbBrxI3 − x (x = 0.17) (MA = methylammonium, FA = formamidinium) perovskite films. X‐ray diffraction (XRD) reveals that the formation of photoinactive phases depends on the nature of counterions (halide vs nonhalide). Furthermore, morphological analysis shows that with the addition of guanidinium salts, the apparent grain size decreases due to the enhancement of nucleation density and/or slow growth of perovskite structures. More importantly, the introduction of GCl leads to the fabrication of perovskite solar cells (PSCs), yielding a photovoltage as high as 1.16 V (1.1 V for reference). In contrast, the introduction of GTC minimally affects the photovoltage, underlining the significance of counterions in improving the photovoltage of PSCs. The present preliminary results of the density functional theory based theoretical investigation related to the effect of G cation on the structure of the perovskite system is presented. In summary, the insights gained through structural and morphological characterization helps to understand the critical role of counterions of guanidinium salts in PSCs.
In this work, we report an easy, efficient method to synthesize high quality lithium-based upconversion nanoparticles (UCNPs) which combine two promising materials (UCNPs and lithium ions) known to enhance the photovoltaic performance of perovskite solar cells (PSCs). Incorporating the synthesized YLiF4:Yb,Er nanoparticles into the mesoporous layer of the PSCs cells, at a certain doping level, demonstrated a higher power conversion efficiency (PCE) of 19%, additional photocurrent, and a better fill factor (FF) of 82% in comparison to undoped PSCs (PCE = ~16.5%; FF = 71%). The reported results open a new avenue toward efficient PSCs for renewable energy applications.
Upconversion nanoparticles (UCNPs) and carbon quantum dots (CQDs) have recently received a lot of attention as promising materials to improve the stability and efficiency of perovskite solar cells (PSCs). This is because they can passivate the surfaces of perovskite-sensitive materials and act as a spectrum converter for sunlight. In this study, we mixed and added both promising nanomaterials to PSC layers at the ideal mixing ratios. When compared to the pristine PSCs, the fabricated PSCs showed improved power conversion efficiency (PCE), from 16.57% to 20.44%, a higher photocurrent, and a superior fill factor (FF), which increased from 70% to 75%. Furthermore, the incorporation of CQDs into the manufactured PSCs shielded the perovskite layer from water contact, producing a device that was more stable than the original.
In this work, high-quality lithium-based, LiYF4=Yb3+,Er3+ upconversion (UC) thin film was electrodeposited on fluorene-doped tin oxide (FTO) glass for solar cell applications. A complete perovskite solar cell (PSC) was fabricated on top of the FTO glass coated with UC thin film and named (UC-PSC device). The fabricated UC-PSC device demonstrated a higher power conversion efficiency (PCE) of 19.1%, an additional photocurrent, and a better fill factor (FF) of 76% in comparison to the pristine PSC device (PCE = ~16.57%; FF = 71%). Furthermore, the photovoltaic performance of the UC-PSC device was then tested under concentrated sunlight with a power conversion efficiency (PCE) of 24% without cooling system complexity. The reported results open the door toward efficient PSCs for renewable and green energy applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.