Natural bentonite (B) mineral clay was modified by anionic surfactant sodium dodecyl sulfate (SDS) and characterized using different techniques such as: FTIR spectroscopy, scanning electron microscopy (SEM) and X-Ray diffraction (XRD). The bentonite and modified bentonite were used as adsorbents for the adsorption of methyl violet (MV) from aqueous solutions. The adsorption study was carried out at different conditions such as: contact time, pH value and adsorbent weight. The adsorption kinetic described by pseudo– first order and pseudo – second order equilibrium experimental data described by Langmuir, Freundlich and Temkin isotherm models. The thermodynamic parameters standard free energy ( ), standard entropy ( ) standard enthalpy ( ) were investigated and determined.

The role of residues in the adsorption process for removing contaminants from their aqueous solution was highlighted in this study. The adsorption capacity of eggshells were used to remove the methyl orange dye from its aqueous solution. The highest dye adsorption was found to range between (62.30% to 62.33%). The results of using adsorption isotherms (Freundlich, Langmuir, and Temkin) have been revealed that the Freundlich model was followed and that the Langmuir model did not match, as well as the partial applicability of Temkin's model at temperatures (298,308,318) K. The process of adsorption is a physical one. Three kinetic models of the adsorption process were also used, with the results demonstrating the applicability of the pseudo-second-order model. In this study, the thermodynamic functions were estimated using the value of the enthalpy ΔH°, which was negative and equal to (-4.7685 KJ/mole), The process was discovered to be exothermic, and the entropy ΔS° value was also negative, equaling (- 11.5100 J/mole.K), indicating a decrease in the randomness of adsorption when added to the Gibbs free energy ΔG°, indicating that the reaction occurred spontaneously.

This study deals with the corrosion inhibition of metal corrosion process of medium carbon steel using 1M HCl for kinetic studies and rate reaction determination. The weight loss method is applied to pieces of Medium carbon steel divided to Cubans with dimensions (0.4*2*2.4) cm , and use Tafel Extrapolation Method, the samples were polished using carbide silicon paper with dimensions of (180,200,400,600,800,1000). The samples were immersed in the alcoholic medium ethanol at a temperature 293K for 3hr. Natural inhibitor Kujarat Tea (Hibiscus sabdarriffa L.) is used which is extracted in aqueous and alcoholic medium, different concentrations (1000،2000, 3000) ppm have been used ; The best concentration found through the results is a concentration found that is 1000 and 2000 ppm, the results indicate that the highest degree of inhibition for aqueous extract is 93.3% with the concentration of 2000 ppm and 90.5% with 1000 ppm at293K. While the alcoholic inhibitor shows the highest efficiency 92.4% with a concentration of 2000 ppm and 88.6% with a concentration of 1000 ppm respectively. The structure of the inhibitor was investigated using infrared spectroscopy (FTIR), and the surface morphology of the tested samples was investigated using a scanning electron microscope (SEM).

Three new complexes of Co(II), Ni(II), and Zn(II), containing ligand of Schiff base (DHMA) derived from methyldopa (mdop) with 3-hydroxybenzaldehyde have been prepared. The synthesized ligand and its complexes were diagnostics by using different physical techniques, The results showed that the complexes have an octahedral shape. In addition it has been studied the adsorption behavior, Uv-Vis technique that applied to survery the isotherm of adsorption. The results showed the possibility of applying the langmair equation. The effect of temperature on the adsorption of Co-complex on the surface of Iraqi Attapulgite clay was studied. The thermodynamic functions ΔGο, ΔHο and ΔSο of Co-complex have been studied and she was ΔGο = (-10.7766, -11.5205, -12.3537)KJ/ mol, this is evidence that the adsorption process is a spontaneous while ΔSο=( 63.6461)J/ mole.K which means an increase in the randomness. The value of ΔHο was (8544.29)J/mole indicate the endothermic natural of the process.