This paper aims to evaluate potential of an Fe-based shape memory alloy (Fe-SMA) for strengthening civil structures. Mechanical properties of the Fe-SMA were investigated with a direct tensile test, which showed the stress-induced transformation, stress at fracture of the Fe-SMA, and modulus of elasticity. Heating temperature ranging from 110 • C to 220 • C and pre-straining level ranging from 2% to 8% of the Fe-SMA were considered as variables to provoke a shape memory effect (SME), which generates a recovery stress. The recovery stresses ranged from 207.59 MPa to 438.61 MPa, which plays a role in introducing a pre-stressing force to concrete members. Bonding behavior of the Fe-SMA embedded into a groove with a cement-based mortar filler was investigated to determine the required bonding length to fully develop the pre-stressing force of the Fe-SMA with a near-surface mounted (NSM) strengthening technique. All the tested specimens showed slippage failure and suggested a minimum bonding length of 600 mm. The pre-stressing force applied on the concrete can be calculated with the recovery stress of the Fe-SMA. Based on those test results, the Fe-SMA shows sufficient potential to be used as strengthening material for civil structures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.