No abstract

This paper investigates the joint states and parameters estimation problem for induction machine. In order to develop new states and parameters estimation methods that greatly improve the estimation bandwidth, this paper proposes an adaptive moving horizon estimation of the crucial states and parameters of the induction machine. The model of the machine under study is the one taking into consideration the magnetic saturation and the iron losses simultaneously. The estimator used is based on a least squares algorithm but includes a dead zone that ensures robustness and a variable forgetting factor that is based on the constant information principle. The simulation results show that the adaptive estimator can efficiently estimate the states and parameters of the induction machine with a fast convergence rate despite the initial parametric errors.

Although moving horizon estimation (MHE) is a very efficient technique for estimating parameters and states of constrained dynamical systems, however, the approximation of the arrival cost remains a major challenge and therefore a popular research topic. The importance of the arrival cost is such that it allows information from past measurements to be introduced into current estimates. In this paper, using an adaptive estimation algorithm, we approximate and update the parameters of the arrival cost of the moving horizon estimator. The proposed method is based on the least-squares algorithm but includes a variable forgetting factor which is based on the constant information principle and a dead zone which ensures robustness. We show by this method that a fairly good approximation of the arrival cost guarantees the convergence and stability of estimates. Some simulations are made to show and demonstrate the effectiveness of the proposed method and to compare it with the classical MHE.

This chapter presents a general framework for the doubly fed induction generator (DFIG). We apply and analyze the behavior of three estimation techniques, which are the unscented Kalman filter (UKF), the high gain observer (HGO) and the moving horizon estimation (MHE). These estimations are used for parameters estimation of the doubly fed induction generator (DFIG) driven by wind turbine. A comparison of those techniques has been made under different aspects notably, computation time and estimation accuracy in two modes of operation of the DFIG, the healthy mode and the faulty mode. The performance of the MHE has been clearly superior to other estimators during our experiments. These estimation tools can be used for monitoring purposes.