Wood density (D ), an excellent predictor of mechanical properties, is typically viewed in relation to support against gravity, wind, snow, and other environmental forces. In contrast, we show the surprising extent to which variation in D and wood structure is linked to support against implosion by negative pressure in the xylem pipeline. The more drought-tolerant the plant, the more negative the xylem pressure can become without cavitation, and the greater the internal load on the xylem conduit walls. Accordingly, D was correlated with cavitation resistance. This trend was consistent with the maintenance of a safety factor from implosion by negative pressure: conduit wall span (b) and thickness (t) scaled so that (t/b) was proportional to cavitation resistance as required to avoid wall collapse. Unexpectedly, trends in D may be as much or more related to support of the xylem pipeline as to support of the plant.

Trees grow tall where resources are abundant, stresses are minor, and competition for light places a premium on height growth. The height to which trees can grow and the biophysical determinants of maximum height are poorly understood. Some models predict heights of up to 120 m in the absence of mechanical damage, but there are historical accounts of taller trees. Current hypotheses of height limitation focus on increasing water transport constraints in taller trees and the resulting reductions in leaf photosynthesis. We studied redwoods (Sequoia sempervirens), including the tallest known tree on Earth (112.7 m), in wet temperate forests of northern California. Our regression analyses of height gradients in leaf functional characteristics estimate a maximum tree height of 122-130 m barring mechanical damage, similar to the tallest recorded trees of the past. As trees grow taller, increasing leaf water stress due to gravity and path length resistance may ultimately limit leaf expansion and photosynthesis for further height growth, even with ample soil moisture.

In this review, we discuss the evolution of xylem structure in the context of our current understanding of the biophysics of water transport in plants. Water transport in land plants occurs while water is under negative pressure and is thus in a metastable state. Vessels filled with metastable water are prone to dysfunction by cavitation whenever gas-filled voids appear in the vessel lumen. Cavitated vessels fill with air and are incapable of water transport until air bubbles dissolve. We know much more about how cavitations occur and the conditions under which air bubbles (embolisms) dissolve. This gives us an improved understanding of the relations hip between xylem structure and function.

The charge of Task Group 186 (TG-186) is to provide guidance for early adopters of model-based dose calculation algorithms (MBDCAs) for brachytherapy (BT) dose calculations to ensure practice uniformity. Contrary to external beam radiotherapy, heterogeneity correction algorithms have only recently been made available to the BT community. Yet, BT dose calculation accuracy is highly dependent on scatter conditions and photoelectric effect cross-sections relative to water. In specific situations, differences between the current water-based BT dose calculation formalism (TG-43) and MBDCAs can lead to differences in calculated doses exceeding a factor of 10. MBDCAs raise three major issues that are not addressed by current guidance documents: (1) MBDCA calculated doses are sensitive to the dose specification medium, resulting in energy-dependent differences between dose calculated to water in a homogeneous water geometry (TG-43), dose calculated to the local medium in the heterogeneous medium, and the intermediate scenario of dose calculated to a small volume of water in the heterogeneous medium. (2) MBDCA doses are sensitive to voxel-by-voxel interaction cross sections. Neither conventional single-energy CT nor ICRU∕ICRP tissue composition compilations provide useful guidance for the task of assigning interaction cross sections to each voxel. (3) Since each patient-source-applicator combination is unique, having reference data for each possible combination to benchmark MBDCAs is an impractical strategy. Hence, a new commissioning process is required. TG-186 addresses in detail the above issues through the literature review and provides explicit recommendations based on the current state of knowledge. TG-43-based dose prescription and dose calculation remain in effect, with MBDCA dose reporting performed in parallel when available. In using MBDCAs, it is recommended that the radiation transport should be performed in the heterogeneous medium and, at minimum, the dose to the local medium be reported along with the TG-43 calculated doses. Assignments of voxel-by-voxel cross sections represent a particular challenge. Electron density information is readily extracted from CT imaging, but cannot be used to distinguish between different materials having the same density. Therefore, a recommendation is made to use a number of standardized materials to maintain uniformity across institutions. Sensitivity analysis shows that this recommendation offers increased accuracy over TG-43. MBDCA commissioning will share commonalities with current TG-43-based systems, but in addition there will be algorithm-specific tasks. Two levels of commissioning are recommended: reproducing TG-43 dose parameters and testing the advanced capabilities of MBDCAs. For validation of heterogeneity and scatter conditions, MBDCAs should mimic the 3D dose distributions from reference virtual geometries. Potential changes in BT dose prescriptions and MBDCA limitations are discussed. When data required for full MBDCA implementation are insufficient, interim ...

The centrifuge method for measuring the resistance of xylem to cavitation by water stress was modified to also account for any additional cavitation that might occur from a freeze-thaw cycle. A strong correlation was found between cavitation by freezing and mean conduit diameter. On the one extreme, a tracheid-bearing conifer and diffuse-porous angiosperms with small-diameter vessels (mean diameter <30 μm) showed no freezing-induced cavitation under modest water stress (xylem pressure = -0.5 MPa), whereas species with larger diameter vessels (mean >40 μm) were nearly completely cavitated under the same conditions. Species with intermediate mean diameters (30-40 μm) showed partial cavitation by freezing. These results are consistent with a critical diameter of 44 μm at or above which cavitation would occur by a freeze-thaw cycle at -0.5 MPa. As expected, vulnerability to cavitation by freezing was correlated with the hydraulic conductivity per stem transverse area. The results confirm and extend previous reports that small-diameter conduits are relatively resistant to cavitation by freezing. It appears that the centrifuge method, modified to include freeze-thaw cycles, may be useful in separating the interactive effects of xylem pressure and freezing on cavitation.

Possible mechanical and hydraulic costs to increased cavitation resistance were examined among six co-occurring species of chaparral shrubs in southern California. We measured cavitation resistance (xylem pressure at 50% loss of hydraulic conductivity), seasonal low pressure potential (P min ), xylem conductive efficiency (specific conductivity), mechanical strength of stems (modulus of elasticity and modulus of rupture), and xylem density. At the cellular level, we measured vessel and fiber wall thickness and lumen diameter, transverse fiber wall and total lumen area, and estimated vessel implosion resistance using (t/b) h 2 , where t is the thickness of adjoining vessel walls and b is the vessel lumen diameter. Increased cavitation resistance was correlated with increased mechanical strength (r 2 5 0.74 and 0.76 for modulus of elasticity and modulus of rupture, respectively), xylem density (r 2 5 0.88), and P min (r 2 5 0.96). In contrast, cavitation resistance and P min were not correlated with decreased specific conductivity, suggesting no tradeoff between these traits. At the cellular level, increased cavitation resistance was correlated with increased (t/b) h 2 (r 2 5 0.95), increased transverse fiber wall area (r 2 5 0.89), and decreased fiber lumen area (r 2 5 0.76). To our knowledge, the correlation between cavitation resistance and fiber wall area has not been shown previously and suggests a mechanical role for fibers in cavitation resistance. Fiber efficacy in prevention of vessel implosion, defined as inward bending or collapse of vessels, is discussed.Among vascular plants, water is transported through xylem under negative pressure. Xylem must withstand both the mechanical stresses associated with negative pressure as well as the risk of air entering the hydraulic pathway. Failure to do so may lead to cavitation of water columns and blockage of water transport. Failure may occur when gas is pulled into water-filled xylem conduits from gas-filled cells or intercellular spaces through pores in the xylem pit membrane in a process referred to as air-seeding (Zimmermann, 1983;Baas et al., 2004). Failure may also occur when negative pressures overcome the ability of the xylem conduit walls to resist implosion (i.e. inward bending or collapse; Carlquist, 1975;Hacke et al., 2001a;Donaldson, 2002;Cochard et al., 2004;Brodribb and Holbrook, 2005). Implosion may trigger cavitation or, in leaves, may restrict hydraulic transport by reducing conduit diameter (Brodribb and Holbrook, 2005). In addition to negative pressures, freezing can lead to failure when sap in the xylem freezes and the gas dissolved in the sap comes out of solution. This can lead to cavitation upon thawing if the bubbles do not go back into solution but instead expand (Yang and Tyree, 1992). The result of cavitation is embolism or gas blockage, which reduces hydraulic transport and can result in reduced stomatal conductance (Pratt et al., 2005), reduced photosynthesis (Brodribb and Feild, 2000), and dieback of branchlets (Rood et al., 2000;Da...

Summary• Here, hypotheses about stem and root xylem structure and function were assessed by analyzing xylem in nine chaparral Rhamnaceae species.• Traits characterizing xylem transport efficiency and safety, mechanical strength and storage were analyzed using linear regression, principal components analysis and phylogenetic independent contrasts (PICs).• Stems showed a strong, positive correlation between xylem mechanical strength (xylem density and modulus of rupture) and xylem transport safety (resistance to cavitation and estimated vessel implosion resistance), and this was supported by PICs. Like stems, greater root cavitation resistance was correlated with greater vessel implosion resistance; however, unlike stems, root cavitation resistance was not correlated with xylem density and modulus of rupture. Also different from stems, roots displayed a trade-off between xylem transport safety from cavitation and xylem transport efficiency. Both stems and roots showed a trade-off between xylem transport safety and xylem storage of water and nutrients, respectively.• Stems and roots differ in xylem structural and functional relationships, associated with differences in their local environment (air vs soil) and their primary functions.

Resistance to xylem cavitation depends on the size of xylem pit membrane pores and the strength of vessels to resist collapse or, in the case of freezing-induced cavitation, conduit diameter. Altering these traits may impact plant biomechanics or water transport efficiency. The evergreen sclerophyllous shrub species, collectively referred to as chaparral, which dominate much of the mediterranean-type climate region of southern California, have been shown to display high cavitation resistance (pressure potential at 50% loss of hydraulic conductivity; P 50 ). We examined xylem functional and structural traits associated with more negative P 50 in stems of 26 chaparral species. We correlated raw-trait values, without phylogenetic consideration, to examine current relationships between P 50 and these xylem traits. Additionally, correlations were examined using phylogenetic independent contrasts (PICs) to determine whether evolutionary changes in these xylem traits correlate with changes in P 50 . Co-occurring chaparral species widely differ in their P 50 (À0.9 to À11.0 MPa). Species experiencing the most negative seasonal pressure potential (P min ) had the highest resistance to xylem cavitation (lowest P 50 ). Decreased P 50 was associated with increased xylem density, stem mechanical strength (modulus of rupture), and transverse fiber wall area when both raw values and PICs were analyzed. These results support a functional and evolutionary relationship among these xylem traits and cavitation resistance. Chaparral species that do not sprout following fire but instead recruit post-fire from seed had the greatest resistance to cavitation, presumably because they rely on post-fire survival of seedlings during the summer dry period to persist in the landscape. Raw values of hydraulic vessel diameter (d h ), maximum vessel length, and xylem-specific hydraulic conductivity (K s ) were correlated to P 50 ; however, d h , maximum vessel length, and K s were not correlated to P 50 when analyzed using PICs, suggesting that these traits have not undergone correlated evolutionary change. We found no difference in xylem traits between species occurring at freezing vs. nonfreezing sites, although freezing has been shown to affect the survival and distributions of some chaparral species. Stem mechanical strength, fiber properties, and post-fire regeneration type appear to be key factors in the evolution of cavitation resistance among chaparral shrubs.