We demonstrate the optical manipulation of cells and dielectric particles on the surface of silicon nitride waveguides. Glass particles with 2microm diameter are propelled at velocities of 15microm/s with a guided power of 20mW. This is approximately 20 times more efficient than previously reported, and permits to use this device on low refractive index objects such as cells. Red blood cells and yeast cells can be trapped on the waveguide and pushed along it by the action of optical forces. This kind of system can easily be combined with various integrated optical structures and opens the way to the development of new microsystems for cell sorting applications.
We have observed the motion of metallic particles above various optical waveguides injected by 1064nm radiation. Small gold particles (250nm diameter) are attracted towards the waveguide where the intensity of the optical field is maximum, and are propelled at high velocity (up to 350mum/s) along the waveguide due to radiation pressure. The behaviour of larger metallic particles (diameter >600nm) depends on the polarization of the evanescent field: for TM polarization they are attracted above the waveguide and propelled by the radiation pressure; for TE polarization they are expelled on the side of the waveguide and propelled at much smaller velocity. This is consistent with calculations of radiative forces on metallic particles by Nieto-Vesperinas et al. 3D-finite element method calculations carried out for our experimental situations confirm the observed dependence with the polarization of the field and the size of the particles. These observations open the way to the development of new microsystems for particles manipulations and sorting applications.
We investigate the behavior of silicon and ZnO nanowires in the evanescent field on the surface of a silicon nitride waveguide. The nanowires in aqueous solution are attracted to the waveguide by the gradient force and then propelled along the waveguide by the radiation pressure. Observed experimental velocities are higher for silicon nanowires than for ZnO nanowires, with relatively large variations for both kinds of nanowires. Simulations with the finite element method show that the forces on the nanowires are very dependent on their geometrical parameters and refractive index, which explains the observed variations.
We present a polarized goniofluorimeter designed to measure the observation-angle and polarization-dependent intensity emitted by a group of surface-bound fluorescent molecules. We studied two types of surface bonding: In one case, dyes were adsorbed into the surface by spin coating, and in the other, dyes were covalently immobilized to DNA strands. Fluorescent dyes consisted of Cy3 and Alexa546. The substrate was a silicon wafer bearing a silicon dioxide layer. The different samples presented a wide panel of reproducible experimental behavior. By confronting experimental behavior with theory and simulation, we can explain these differences as directly linked to the mean orientation of fluorophores with respect to the surface.
Curved sensors are a suitable technological solution to enhance the vast majority of optical systems. In this work, we show the entire process to create curved sensor-based optical systems and the possibilities they offer. This paper defines the boundaries of the reachable curvatures for a full range of monolithic sensors. We discuss how the curved focal plane shape is related to the imaged scenes and optical parameters. Two camera prototypes are designed, realized and tested, demonstrating a new compact optical architecture for a 40 degree compact objective, as well as a wide field fisheye zoom objective using a convex sensor to image a 180 degree field of view.
While dielectric/metal/dielectric (DMD) multilayer thin films have raised considerable interest as transparent and conductive electrodes in various optoelectronic devices, the knowledge of optical characteristics of thin metallic layers integrated in such structures is still rather approximate. The multispectral surface plasmon resonance characterization approach described in this work precisely aims at providing a rigorous methodology able to accurately determine the optical constants of ultra-thin metallic films. As a practical example, the refractive index and extinction dispersion curves of 8 to 25 nm-thick silver layers have been investigated. As a result, their extreme dependence on the layer thickness is highlighted, in particular in a thickness range close to the critical threshold value (∼10 nm) where the silver film becomes continuous and its electrical conductance/optical transmittance ratio particularly interesting. To check the validity of the revisited Ag layers constant dispersion curves deduced from this study, they were introduced into a commercial optical model software to simulate the behavior of various optoelectronic building blocks from the simplest ones (DMD electrodes) to much more complex structures [full organic light emitting device (OLED) stacks]. As a result, a much better prediction of the emission spectrum profile as well as the angular emission pattern of top-emitting OLEDs is obtained. On this basis, it is also shown how a redesign of the top encapsulation thin film of OLEDs is necessary to better take benefit from the advanced DMD electrode. These results should particularly interest the micro-OLED display field where bright and directive single color pixel emission is required.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.