Cooking is an important processing method, that has been used since ancient times in order to both ensure microbiological safety and give desired organoleptic properties to the cooked food. Fish and other seafood products are highly sensitive to thermal treatments and the application of severe heat can result in negative consequences on sensory and nutritional parameters, as well as other quality attributes of the thermally processed products. To avoid such undesired effects and to extend the shelf life of these perishable products, both the heat processing methods and the assessment techniques used to monitor the process should be optimized. In this review paper, the most common cooking methods and some innovative ones will first be presented with a brief discussion of their impact on seafood quality. The main methods used for monitoring heat treatments will then be reviewed with a special focus on spectroscopic techniques, which are known to be rapid and non-destructive methods compared to traditional approaches. Finally, viewpoints of the current challenges will be discussed and possible directions for future applications and research will be suggested. The literature presented in this review clearly demonstrates the potential of spectroscopic techniques, coupled with chemometric tools, for online monitoring of heat-induced changes resulting from the application of thermal treatments of seafood. The use of fluorescence hyperspectral imaging is especially promising, as the technique combines the merits of both fluorescence spectroscopy (high sensitivity and selectivity) and hyperspectral imaging (spatial dimension). With further research and investigation, the few current limitations of monitoring thermal treatments by spectroscopy can be addressed, thus enabling the use of spectroscopic techniques as a routine tool in the seafood industry.

Lutefisk is a traditional Norwegian fish dish made from dried fish, such as cod or other whitefish. In Norway and other Nordic countries, lutefisk is considered among the most popular dishes served during Christmas or other festive occasions. However, to date, little attention has been paid to this product, and available research on the quality, processing, and chemistry of lutefisk is still limited. The quality of this very delicate product, with a high pH value, depends on many factors, such as the initial quality of raw materials (stockfish), the quantity of lye used during the preparation process of lutefisk, and time during soaking in the lye and water, among others, making it challenging to both optimize processing and monitor the quality of lutefisk. In this study, four commercially available lutefisk brands (labelled as A, B, C, and D) were characterized using two online spectroscopic techniques, namely fluorescence and diffuse reflectance hyperspectral imaging, implemented on conveyor belts to mimic industrial applications. The samples were also analyzed by the use of an offline laboratory instrument based on visible/near infrared diffuse reflectance spectroscopy. Three traditional measurements, including texture, water content, and pH, were also conducted on the same samples. Supervised classification PLS-DA models were built with each dataset and relationships between the spectroscopic measurements and the traditional data were investigated using canonical correlations. The spectroscopic methods, especially fluorescence spectroscopy, demonstrated high performance for the discrimination between samples of the different brands, with high correlations between the spectral and traditional measurements. Although more validations of the results of this study are still required, these preliminary findings suggest that the destructive, laborious, and time-consuming traditional techniques can be replaced by rapid and nondestructive online measurements based on hyperspectral imaging used in fluorescence or diffuse reflectance mode.

In this work, the potential of spectroscopic techniques was studied to investigate heat-induced changes occurring during the application of thermal treatments on cod (Gadus morhua L.) fillets. Vacuum-packed samples were thermally treated in a water bath at 50, 60, 70 and 80 °C for 5 and 10 min, and further stored for one, four, and eight days at 4 ± 1 °C before analysis. Several traditional (including cooking loss, drip loss, texture, protein solubility, protein oxidation, and color) and spectroscopic (fluorescence and diffuse reflectance hyperspectral imaging) measurements were conducted on the same samples. The results showed a decrease in fluorescence intensity with increasing cooking temperature and storage time, while the impact of cooking time was only noticeable at low temperatures. Diffuse reflectance data exhibited a decrease in absorbance, possibly as a result of protein denaturation and increased scattering at higher cooking temperatures. Both fluorescence and diffuse reflectance data were highly correlated with color parameters, whereas moderate correlations were observed with most other traditional parameters. Support vector machine models performed better than partial least square ones for both classification of cod samples cooked at different temperatures and in prediction of the cooking temperature. The best classification result was obtained on fluorescence data, achieving an accuracy of 92.5%, while the prediction models resulted in a root mean square error of prediction of cooking temperature lower than 5 °C. Overall, the classification and prediction models showed good results, indicating that spectroscopic techniques, especially fluorescence hyperspectral imaging, have a high potential for monitoring thermal treatments in cod fillets.

No abstract

No abstract

No abstract

No abstract

Hyperspectral imaging technology is able to provide useful information about the interaction between electromagnetic radiation and matter. This information makes possible chemical characterization of materials in a non-invasive manner. For this reason, the technology has been of great interest for the food industry in recent decades. In this book chapter, we provide a survey of the current status of the use of hyperspectral technology for seafood evaluation. First, we provide a brief description of the optical properties of tissue and an introduction to the instrumentation used to capture these images. Then, we survey the main applications of hyperspectral imaging in the seafood industry, including the quantification of different chemical components, the estimation of freshness, the quality assessment of seafood products, and the detection of nematodes, among others. Finally, we provide a discussion about the current state of the art and the upcoming challenges for the application of this technology in the seafood industry.