We propose a new decentralized control scheme for DC Islanded microGrids (ImGs) composed by several Distributed Generation Units (DGUs) with a general interconnection topology. Each local controller regulates to a reference value the voltage of the Point of Common Coupling (PCC) of the corresponding DGU. Notably, off-line control design is conducted in a Plug-and-Play (PnP) fashion meaning that (i) the possibility of adding/removing a DGU without spoiling stability of the overall ImG is checked through an optimization problem; (ii) when a DGU is plugged in or out at most neighbouring DGUs have to update their controllers and (iii) the synthesis of a local controller uses only information on the corresponding DGU and lines connected to it. This guarantee total scalability of control synthesis as the ImG size grows or DGU gets replaced. Yes, under mild approximations of line dynamics, we formally guarantee stability of the overall closed-loop ImG. The performance of the proposed controllers is analyzed simulating different scenarios in PSCAD.

In this paper we consider a linear system structured into physically coupled subsystems and propose a decentralized control scheme capable to guarantee asymptotic stability and satisfaction of constraints on system inputs and states. The design procedure is totally decentralized, since the synthesis of a local controller uses only information on a subsystem and its neighbors, i.e. subsystems coupled to it. We first derive tests for checking if a subsystem can be plugged into (or unplugged from) an existing plant without spoiling overall stability and constraint satisfaction. When this is possible, we show how to automatize the design of local controllers so that it can be carried out in parallel by smart actuators equipped with computational resources and capable to exchange information with neighboring subsystems. In particular, local controllers exploit tube-based Model Predictive Control (MPC) in order to guarantee robustness with respect to physical coupling among subsystems. Finally, an application of the proposed control design procedure to frequency control in power networks is presented.

In this paper we propose a new decentralized control scheme for Islanded microGrids (ImGs) composed by the interconnection of Distributed Generation Units (DGUs). Local controllers regulate voltage and frequency at the Point of Common Coupling (PCC) of each DGU and they are able to guarantee stability of the overall ImG. The control design procedure is decentralized, since, besides two global scalar quantities, the synthesis of a local controller uses only information on the corresponding DGU and lines connected to it. Most important, our design procedure enables Plug-and-Play (PnP) operations: when a DGU is plugged in or out, only DGUs physically connected to it have to retune their local controllers. We study the performance of the proposed controllers simulating different scenarios in MatLab/Simulink and using performance indexes proposed in IEEE standards.

No abstract

In this paper we consider a linear system structured into physically coupled subsystems and propose an innovative distributed control scheme capable to guarantee asymptotic stability and satisfaction of constraints on system inputs and states. Our method hinges on the availability of a decentralized stabilizing regulator for the unconstrained system and provides a two-layer controller for each subsystem. Upper controllers receive planned state trajectories from neighboring subsystems and exploit the notion of tubes [12] for achieving robustness of stability with respect to coupling. Lower controllers generate planned trajectories using Model Predictive Control (MPC) independently of the other subsystems. The proposed control scheme is arguably easier to design and apply than existing distributed controllers with similar features. A comparison of the proposed approach with existing centralized and distributed MPC regulators is conducted using an illustrative example.

Abstract-This paper deals with a novel Plug-and-Play (PnP) architecture for the control and monitoring of Large-Scale Systems (LSSs). The proposed approach integrates a distributed Model Predictive Control (MPC) strategy with a distributed Fault Detection (FD) architecture and methodology in a PnP framework. The basic concept is to use the FD scheme as an autonomous decision support system: once a fault is detected, the faulty subsystem can be unplugged to avoid the propagation of the fault in the interconnected LSS. Analogously, once the issue has been solved, the disconnected subsystem can be re-plugged-in. PnP design of local controllers and detectors allow these operations to be performed safely, i.e. without spoiling stability and constraint satisfaction for the whole LSS. The PnP distributed MPC is derived for a class of nonlinear LSSs and an integrated PnP distributed FD architecture is proposed. Simulation results in two paradigmatic examples show the effectiveness and the potential of the general methodology.

In this paper we consider a linear system structured into physically coupled subsystems and propose a decentralized control scheme capable to guarantee asymptotic stability and satisfaction of constraints on system inputs and states. The design procedure is totally decentralized, since the synthesis of a local controller uses only information on a subsystem and its neighbors, i.e. subsystems coupled to it. We first derive tests for checking if a subsystem can be plugged into (or unplugged from) an existing plant without spoiling overall stability and constraint satisfaction. When this is possible, we show how to automatize the design of local controllers so that it can be carried out in parallel by smart actuators equipped with computational resources and capable to exchange information with neighboring subsystems. In particular, local controllers exploit tube-based Model Predictive Control (MPC) in order to guarantee robustness with respect to physical coupling among subsystems. Finally, an application of the proposed control design procedure to frequency control in power networks is presented.

Abstract-This paper presents a method for plug-and-play distributed MPC of a network of interacting linear systems. The previously introduced idea of plug and play control addresses the challenge of performing network changes in the form of subsystems that are joining or leaving the network during closed-loop operation, while maintaining stability and constraint satisfaction. This work extends these ideas to an iterative distributed MPC scheme for systems with strong coupling by employing a recently proposed method for distributed MPC that takes the coupling dynamics into account in the form of time-varying terminal sets and distributed optimization. A distributed synthesis procedure for the update of the local control laws is proposed together with a transition scheme preparing the system for the upcoming modifications. This enables automatic plug-and-play operation, including rejection if the new network topology is infeasible. Both the synthesis and online control are entirely distributed and are only based on local information on the subsystems and their coupled neighbors. Finally, the proposed scheme is applied to the problem of frequency control in a power network. I. INTRODUCTIONDistributed control is a promising tool to overcome the limiting computational complexity and communication requirements associated with centralized control of large-scale networked systems. This paper presents an approach for distributed linear Model Predictive Control (MPC) with plug and play capabilities, enabling network changes by subsystems joining or leaving the network, while ensuring stability and constraint satisfaction of the global system. The proposed scheme makes plug and play MPC available for networks with strongly coupled subsystems by means of distributed invariance and optimization and allows for an entirely distributed controller synthesis.The control of large complex networks represents one of the key challenges in order to cope with many relevant control problems, examples include electric power, water resources, gas and fuel distribution, transportation or telecommunication networks. In this context, Model Predictive Control offers an attractive tool, being a high performance control scheme for constrained systems that allows