The energy produced by photovoltaic farms has a variable nature depending on astronomical and meteorological factors. The former are the solar elevation and the solar azimuth, which are easily predictable without any uncertainty. The amount of liquid water met by the solar radiation within the troposphere is the main meteorological factor influencing the solar power production, as a fraction of short wave solar radiation is reflected by the water particles and can't reach the earth surface. The total cloud cover is a meteorological variable often used to indicate the presence of liquid water in the troposphere and has a limited predictability, which is also reflected on the global horizontal irradiance and, as a consequence, on solar photovoltaic power prediction. This lack of predictability makes the solar energy integration into the grid challenging. A cost-effective utilization of solar energy over a grid strongly depends on the accuracy and reliability of the power forecasts available to the Transmission System Operators (TSOs). Furthermore, several countries have in place legislation requiring solar power producers to pay penalties proportional to the errors of day-ahead energy forecasts, which makes the accuracy of such predictions a determining factor for producers to reduce their economic losses. Probabilistic predictions can provide accurate deterministic forecasts along with a quantification of their uncertainty, as well as a reliable estimate of the probability to overcome a certain production threshold. In this paper we propose the application of an analog ensemble (AnEn) method to generate probabilistic solar power forecasts (SPF). The AnEn is based on an historical set of deterministic numerical weather prediction (NWP) model forecasts and observations of the solar power. For each forecast lead time and location, the ensemble prediction of solar power is constituted by a set of past production data. These measurements are those concurrent to past deterministic NWP forecasts for the same lead time and location, chosen based on their similarity to the current forecast and, in the current application, are represented by the one-hour average produced solar power. The AnEn performance for SPF is compared to a quantile regression (QR) technique and a persistence ensemble (PeEn) over three solar farms in Italy spanning different climatic conditions. The QR is a state-of-the-science method for probabilistic predictions that, similarly to AnEn, is based on a historical data set. The PeEn is a persistence model for probabilistic predictions, where the most recent 20 power measurements available at the same lead-time are used to form an ensemble. The performance assessment has been carried out evaluating important attributes of a probabilistic system such as statistical consistency, reliability, resolution and skill. The AnEn performs as well as QR for common events, by providing predictions with similar reliability, resolution and sharpness, while it exhibits more skill for rare events and during hours with a...

A methodology based on Artificial Neural Networks (ANN) and an Analog Ensemble (AnEn) is presented to generate 72-hour deterministic and probabilistic forecasts of power generated by photovoltaic (PV) power plants using input from a numerical weather prediction model and computed astronomical variables. ANN and AnEn are used individually and in combination to generate forecasts for three solar power plants located in Italy. The computational scalability of the proposed solution is tested using synthetic data simulating 4,450 PV power stations. The NCAR Yellowstone supercomputer is employed to test the parallel implementation of the proposed solution, ranging from 1 node (32 cores) to 4,450 nodes (141,140 cores). Results show that a combined AnEn + ANN solution yields best results, and that the proposed solution is well suited for massive scale computation.

No abstract

International audienceThis paper presents an overview of the state of the art on the research on Dynamic Line Rating forecasting. It is directed at researchers and decision-makers in the renewable energy and smart grids domain, and in particular at members of both the power system and meteorological community. Its aim is to explain the details of one aspect of the complex interconnection between the environment and power systems. The ampacity of a conductor is defined as the maximum constant current which will meet the design, security and safety criteria of a particular line on which the conductor is used. Dynamic Line Rating (DLR) is a technology used to dynamically increase the ampacity of electric overhead transmission lines. It is based on the observation that the ampacity of an overhead line is determined by its ability to dissipate into the environment the heat produced by Joule effect. This in turn is dependent on environmental conditions such as the value of ambient temperature, solar radiation, and wind speed and direction. Currently, conservative static seasonal estimations of meteorological values are used to determine ampacity. In a DLR framework, the ampacity is estimated in real time or quasi-real time using sensors on the line that measure conductor temperature, tension, sag or environmental parameters such as wind speed and air temperature. Because of the conservative assumptions used to calculate static seasonal ampacity limits and the variability of weather parameters, DLRs are considerably higher than static seasonal ratings. The latent transmission capacity made available by DLRs means the operation time of equipment can be extended, especially in the current power system scenario, where power injections from Intermittent Renewable Sources (IRS) put stress on the existing infrastructure. DLR can represent a solution for accommodating higher renewable production whilst minimizing or postponing network reinforcements. On the other hand, the variability of DLR with respect to static seasonal ratings makes it particularly difficult to exploit, which explains the slow take-up rate of this technology. In order to facilitate the integration of DLR into power system operations, research has been launched into DLR forecasting, following a similar avenue to IRS production forecasting, i.e. based on a mix of statistical methods and meteorological forecasts. The development of reliable DLR forecasts will no doubt be seen as a necessary step for integrating DLR into power system management and reaping the expected benefits

a b s t r a c tThe efficient integration of wind in the energy market is limited by its natural variability and predictability. This limitation can be tackled by using the probabilistic predictions that provide accurate deterministic forecasts along with a quantification of their uncertainty. We propose as a novelty the application of an analog ensemble (AnEn) method to generate probabilistic wind power forecasts (WPF). The AnEn prediction of a given variable is constituted by a set of measurements of the past, concurrent to the past forecasts most similar to the current one. The AnEn performance for WPF is compared with three state-of-the-science methods for probabilistic predictions over a wind farm and a 505-day long period: a wind power prediction based on the ensemble wind forecasts from the European Centre for Medium-Range Weather Forecasts (ECMWF) Ensemble Prediction System (ECMWF-EPS), the Limitedarea Ensemble Prediction System (LEPS) developed within the COnsortium for Small-scale MOdelling (COSMO-LEPS) and a quantile regression (QR) technique. The AnEn performs as well as ECMWF-EPS, COSMO-LEPS and QR for common events while it exhibits more skill for rare events. A comparison with the performances obtained with a deterministic forecasting method based on a Neural Network is also carried out showing the benefits of using AnEn.