For medical application, easily accessible biomaterials with tailored properties are desirable. Collagen type I represents a biomaterial of choice for regenerative medicine and tissue engineering. Here, we present a simple method to modify the properties of collagen and to generate collagen laminates. We selected three commercially available collagen sheets with different thicknesses and densities and examined the effect of rose bengal and green light collagen crosslinking (RGX) on properties such as microstructure, swelling degree, mechanical stability, cell compatibility and drug release. The highest impact of RGX was measured for Atelocollagen, for which the swelling degree was reduced from 630% (w/w) to 520% (w/w) and thickness measured under force application increased from 0.014 mm to 0.455 mm, indicating a significant increase in mechanical stability. Microstructural analysis revealed that the sponge-like structure was replaced by a fibrous structure. While the initial burst effect during vancomycin release was not influenced by crosslinking, RGX increased cell proliferation on sheets of Atelocollagen and on Collagen Solutions. We furthermore demonstrate that RGX can be used to covalently attach different sheets to create materials with combined properties, making the modification and combination of readily available sheets with RGX an attractive approach for clinical application.

To prevent infections local delivery of antibiotics is a useful tool. Especially in bone fractures, vancomycin impregnated bone cements are often used allowing high concentrations of antibiotics at the infection side without high serum concentrations. However, besides potential pathogens, cells involved in tissue regeneration may also be affected by the drug. We investigated the effect of vancomycin on the viability and functionality on osteoblasts, endothelial cells, fibroblasts and skeletal muscle cells. Our results show that the viability of all cells analyzed was reduced by vancomycin and that the observed effects were time and concentration dependent. The most pronounced toxic effect was detected on day three when even the lowest concentration of 0.01 mg/ml led to a significant decrease in proliferation compared to control. Functionality assays of osteoblasts and skeletal muscle cells revealed a sensitive reaction of the cells to the drug, indicating that vancomycin is toxic to these cells during the process of differentiation. These data suggest that the vancomycin administration is critical for cell survival and function. Therefore, the concentration of administered antibiotics needs to be carefully evaluated to find a balance between defense against pathogens and functionality of host cells and tissues.

The controlled release of antibiotics prevents the spread of pathogens and thereby improves healing processes in regenerative medicine. However, high concentrations may interfere with healing processes. It is therefore advantageous to use biodegradable materials for a controlled release. In particular, multilayer materials enable differential release at different surfaces. For this purpose, collagen sheets of different properties can be bonded by photochemical crosslinking. Here, we present the development and application of an easily accessible, additively manufactured sample holder to study the controlled release of vancomycin from modularly assembled collagen laminates in two directions. As proof-of-concept, we show that laminates of collagen sheets covalently linked by rose bengal and green light crosslinking (RGX) can be tightly inserted into the device without leakage from the upper to lower cavity. We used this sample holder to detect the release of vancomycin from symmetrically and asymmetrically loaded two-layer and three-layer collagen laminates into the upper and lower cavity of the sample holder. We show that these collagen laminates are characterized by a collagen type-dependent vancomycin release, enabling the control of antibiotic release profiles as well as the direction of antibiotic release.

Peptoids that bind to protein targets can be selected from one‐bead‐one‐compound libraries. Macrocyclization has been often used to increase conformational rigidity and binding affinity in both peptides and peptoids. Here we describe a combined strategy to label and cyclize hexameric peptoid sequences previously identified in a screen against the inflammatory chemokine interleukin‐8/CXCL8 that is involved in a number of inflammatory diseases. Cyclization can be performed on‐bead in the presence of side‐chain protecting groups so that this strategy can be applied to a large variety of sequences. The affinity of the resulting tetramethylrhodamine‐labeled macrocyclic peptomers to CXCL8 is increased by at least 1 order of magnitude compared to the original linear sequences.

Collagen is one of the most important biomaterials for tissue engineering approaches. Despite its excellent biocompatibility, it shows the non-negligible disadvantage of poor mechanical stability. Photochemical crosslinking with rose bengal and green light (RGX) is an appropriate method to improve this property. The development of collagen laminates is helpful for further adjustment of the mechanical properties as well as the controlled release of incorporated substances. In this study, we investigate the impact of crosslinking and layering of two different collagen scaffolds on the swelling behavior and mechanical behavior in micro tensile tests to obtain information on its wearing comfort (stiffness, strength and ductility). The mechanical stability of the collagen material after degradation due to cell contact is examined using thickness measurements. There is no linear increase or decrease due to layering homologous laminates. Unexpectedly, a decrease in elongation at break, Young’s modulus and ultimate tensile strength are measured when the untreated monolayer is compared to the crosslinked one. Furthermore, we can detect a connection between stability and cell proliferation. The results show that with variation in number and type of layers, collagen scaffolds with tailored mechanical properties can be produced. Such a multi-layered structure enables the release of biomolecules into inner or outer layers for biomedical applications.