The current interest in porous crystalline metal-organic frameworks (MOFs) [1] is largely due to their wide range of compositions and structure types with low framework densities, their tunability, and the possibility of accessible, coordinatively unsaturated metal sites (CUS). The existence of CUS can strongly modify interactions with gases [2] or liquid adsorbates, [3] and is thus of particular importance gas storage and separations.The redox properties of transition-metal-substituted zeolites and mesoporous materials have been extensively studied and used for selective catalysis in liquid-phase oxidation, [4] removal of nitrogen oxides, [5] and photocatalytic reactions.[6]These features are very rare for MOFs containing 3d metals, in particular with respect to the reducibility of the framework metal ions. [7] For this reason, we examine herein both the conditions of generation of iron CUS with mixed valence Fe II

A series of organically modified iron(III) terephthalate MIL-88B and iron(III) 4,4'-biphenyl dicarboxylate MIL-88D flexible solids have been synthesized and characterized through a combination of X-ray diffraction, IR spectroscopy, and thermal analysis (MIL stands for Material from Institut Lavoisier). The swelling amplitude of the highly flexible MOFs tuned by introducing functional groups onto the phenyl rings shows a clear dependence on the steric hindrance and on the number of groups per aromatic ring. For instance, while the introduction of four methyl groups per spacer in dried MIL-88B results in a large permanent porosity, introducing two or four methyl groups in MIL-88D allows an easier pore opening in the presence of liquids without drastically decreasing the swelling magnitude. The influence of the degree of saturation of the metal center and the nature of the solvent on the swelling is also discussed. Finally, a computationally assisted structure determination has led to a proposal of plausible structures for the closed (dried) and open forms of modified MIL-88B and MIL-88D and to evaluation of their framework energies subject to the nature of the functional groups.

This feature article covers the recent applications of metal‐organic framework nanoparticles (MOF NPs) in photodynamic therapy (PDT) of cancer. It aims at giving the reader an overview about these two current research fields, i.e., MOF and PDT, and at highlighting the potential synergistic effect that could result from their association. After describing the general photophysics and photochemistry that underlie PDT, the relationship between photosensitizer (PS) properties and PDT requirements is discussed throughout the PSs historical development. This development reveals the advantages of using nanotechnology platforms for the creation of the ideal PS and leads us to define the fourth generation of PSs, which includes NPs built from the PS itself as porphysomes or PS‐based MOF NPs. Especially, the precise spatial control over the PS assembly into well‐defined MOF NPs, which keeps the PS in its monomeric form and prevents PS self‐quenching, appears as a notable feature to solve PS solubility and aggregation issues and therefore improves the PDT efficiency. Finally, we discuss the future perspectives of MOF NPs in PDT and shed light on how promising these nanomaterials are.

What to measure? is a key question in nanoscience, and it is not straightforward to address as different physicochemical properties define a nanoparticle sample. Most prominent among these properties are size, shape, surface charge, and porosity. Today researchers have an unprecedented variety of measurement techniques at their disposal to assign precise numerical values to those parameters. However, methods based on different physical principles probe different aspects, not only of the particles themselves, but also of their preparation history and their environment at the time of measurement. Understanding these connections can be of great value for interpreting characterization results and ultimately controlling the nanoparticle structure–function relationship. Here, the current techniques that enable the precise measurement of these fundamental nanoparticle properties are presented and their practical advantages and disadvantages are discussed. Some recommendations of how the physicochemical parameters of nanoparticles should be investigated and how to fully characterize these properties in different environments according to the intended nanoparticle use are proposed. The intention is to improve comparability of nanoparticle properties and performance to ensure the successful transfer of scientific knowledge to industrial real‐world applications.

No abstract

The pores in metal-organic frameworks (MOFs) can be functionalized by placing chemical entities along the backbone and within the backbone. This chemistry is enabled by the architectural, thermal, and chemical robustness of the frameworks and the ability to characterize them by many diffraction and spectroscopic techniques. The pore chemistry of MOFs is articulated in terms of site isolation, coupling, and cooperation and relate that to their functions in guest recognition, catalysis, ion and electron transport, energy transfer, pore-dynamic modulation, and interface construction. It is envisioned that the ultimate control of pore chemistry requires arranging functionalities into defined sequences and developing techniques for reading and writing such sequences within the pores.

Widespread access to greener energy is required in order to mitigate the effects of climate change. A significant barrier to cleaner natural gas usage lies in the safety/efficiency limitations of storage technology. Despite highly porous metal-organic frameworks (MOFs) demonstrating record-breaking gas-storage capacities, their conventionally powdered morphology renders them non-viable. Traditional powder shaping utilising high pressure or chemical binders collapses porosity or creates low-density structures with reduced volumetric adsorption capacity. Here, we report the engineering of one of the most stable MOFs, Zr-UiO-66, without applying pressure or binders. The process yields centimetre-sized monoliths, displaying high microporosity and bulk density. We report the inclusion of variable, narrow mesopore volumes to the monoliths’ macrostructure and use this to optimise the pore-size distribution for gas uptake. The optimised mixed meso/microporous monoliths demonstrate Type II adsorption isotherms to achieve benchmark volumetric working capacities for methane and carbon dioxide. This represents a critical advance in the design of air-stable, conformed MOFs for commercial gas storage.

Controlled on-surface film growth of porous and crystalline frameworks is a central prerequisite for incorporating these materials into functional platforms and operational devices. Here, we present the synthesis of thin zirconium-based metal-organic framework (MOF) films by vapor-assisted conversion (VAC). We established protocols adequate for the growth of UiO-66, UiO-66(NH), UiO-67, and UiO-68(NH) as well as the porous interpenetrated Zr-organic framework, PPPP-PIZOF-1, as highly oriented thin films. Through the VAC approach, precursors in a cast solution layer on a bare gold surface are reacting to form a porous continuous MOF film, oriented along the [111] crystal axis, by exposure to a solvent vapor at elevated temperature of 100 °C and 3 h reaction time. It was found that the concentration of dicarboxylic acid, the modulator, the droplet volume, and the reaction time are vital parameters to be controlled for obtaining oriented MOF films. Using VAC for the MOF film growth on gold surfaces modified with thiol SAMs and on a bare silicon surface yielded oriented MOF films, rendering the VAC process robust toward chemical surface variations. Ethanol sorption experiments show that a substantial part of the material pores is accessible. Thereby, the practical VAC method is an important addition to the toolbox of synthesis methods for thin MOF films. We expect that the VAC approach will open new horizons in the formation of highly defined functional thin MOF films for numerous applications.