Triazoles are well-known organic corrosion inhibitors of copper. 1H-1,2,3-Triazole and 1,2,4-triazole, two very simple molecules with the only difference being the positions of the nitrogen atoms in the triazole ring, were studied in this work as corrosion inhibitors of copper in 50 mM NaCl solution using a set of electrochemical and analytical techniques. The results of electrochemical tests indicate that 1H-1,2,3-triazole exhibited superior inhibitor properties but could not suppress anodic copper dissolution at moderate anodic potentials (>+300 mV SCE), while 1,2,4-triazole, although it exhibited higher anodic currents, suppressed anodic copper dissolution at very anodic potentials. Density functional theory calculations were also performed to interpret the measured data and trends observed in the electrochemical studies. The computational studies considered either the inhibitors isolated in the gaseous phase or adsorbed onto Cu(111) surface models. From the calculations, the mechanisms of the inhibitive effects of both triazoles were established and plausible mechanisms of formation of the protective films on the Cu surface were proposed. The results of this study hold positive implications for research in the areas of catalysis, and copper content control in water purification systems.

Increasing demands for environmental accountability and energy efficiency in industrial practice necessitates significant modification(s) of existing technologies and development of new ones to meet the stringent sustainability demands of the future. Generally, development of required new technologies and appropriate modifications of existing ones need to be premised on in-depth appreciation of existing technologies, their limitations, and desired ideal products or processes. In the light of these, published literature mostly in the past 30 years on the sealing process; the second highest energy consuming step in aluminum anodization and a step with significant environmental impacts has been critical reviewed in this systematic review. Emphasis have been placed on the need to reduce both the energy input in the anodization process and environmental implications. The implications of the nano-porous structure of the anodic oxide on mass transport and chemical reactivity of relevant species during the sealing process is highlighted with a focus on exploiting these peculiarities, in improving the quality of sealed products. In addition, perspective is provided on plausible approaches and important factors to be considered in developing sealing procedures that can minimize the energy input and environmental impact of the sealing step, and ensure a more sustainable aluminum anodization process/industry.Coatings 2020, 10, 226 2 of 55 sealing methods. Furthermore, the applicability of another hitherto popular sealing process; chromate sealing, is currently limited to essential parts in the aerospace industry due to toxicological, health, and environmental implications traced to Cr(VI) employed in the process [7][8][9][10][11][12][13][14][15][16]. On the other hand, the advantages of another industrially utilized sealing process; the nickel fluoride (cold) sealing process is limited by the toxicity of nickel salts which narrows its range of application, and introduces added costs due to post-sealing wastewater treatments and management [17][18][19][20]. Further efforts at sealing anodized aluminum at temperatures lower than that used in hydrothermal (high temperature) sealing, have led to much variety in the chemical constitution and operating temperatures of sealing baths [21]. On the basis of temperature at which the sealing step is carried out, sealing can be classified into three major categories; high temperature, mid-temperature, and room-temperature or cold sealing. In this work sealing at temperatures from 0 to 40 • C is classified as low temperature sealing, from ≥ 40 • C to 70 • C as intermediate or mid temperature sealing, and sealing at temperatures > 70 • C as high temperature sealing.

Carbon is used as a reinforcing phase in carbon-fiber reinforced polymer composites employed in aeronautical and other technological applications. Under polarization in aqueous media, which can occur on galvanic coupling of carbon-fiber reinforced polymers (CFRP) with metals in multi-material structures, degradation of the composite occurs. These degradative processes are intimately linked with the electrically conductive nature and surface chemistry of carbon. This review highlights the potential corrosion challenges in multi-material combinations containing carbon-fiber reinforced polymers, the surface chemistry of carbon, its plausible effects on the electrochemical activity of carbon, and consequently the degradation processes on carbon-fiber reinforced polymers. The implications of the emerging use of conductive nano-fillers (carbon nanotubes and carbon nanofibers) in the modification of CFRPs on galvanically stimulated degradation of CFRP is accentuated. The problem of galvanic coupling of CFRP with selected metals is set into perspective, and insights on potential methods for mitigation and monitoring the degradative processes in these composites are highlighted.

Characterization of Agbaja iron ore was carried out using optical microscopy, scanning electron microscopy with energydispersive X-ray spectroscopy, X-ray fluorescence spectrometry, powder X-ray diffraction, thermal gravimetry, and differential scanning calorimetry. The ore consists of a matrix of gangue minerals composed principally of aluminosilicates and iron-rich concentric cored structures characteristic of oolitic ores. Chemical analyses of the ore indicate that it is principally composed of 53.1 wt% Fe, 1.395 wt% P, and aluminosilicates. The phosphorus associated with the ore was found to be present in both the iron-rich mineral(s) and the gangue minerals, indicating that beneficiation by elimination of gangue will have little effect on the percentage of phosphorus in the valuable mineral. Based on the results, it is postulated that phosphorus in Agbaja iron ore is most probably present in an amorphous phase and not as a component element of a distinct crystalline phase.