EVALUASI DAN PERKEMBANGAN PEMBUATAN BAHAN BAKAR KERNEL UO2 DI PTAPBBATANYOGYAKARTA Telah dilakukan evaluasi pembuatan bahan bakar kernel UO2 sertaperkembangannya di Bidang Kimia dan Teknologi Proses Bahan (BKTPB) – PTAPB - BATAN Yogyakarta.Pembuatan kernel UO2 telah dilakukan dengan metode gelasi internal maupun eksternal. Metode gelasiinternal dilakukan dengan cara kombinasi proses KEMA-HKFA (Keuringvan Electrotecnische Materialenat Arnhem-Hkernforchungsanlage) maupun dengan proses ORNL (Oak Ridge National Laboratory),sedangkan metode gelasi eksternal dilakukan dengan proses emulsifikasi NUKEM (Nuclear Chemie undMetalurgie Gmbh). Dengan metode gelasi internal, telah dilakukan berbagai optimasi kondisi prosesnya.Hasil sementara menunjukkan bahwa proses yang paling baik adalah proses ORNL menggunakan mediagelasi TCE (tricloro etilena). Dengan metode gelasi eksternal, telah diperoleh beberapa kondisi optimum,namun masih perlu dilakukan optimasi lebih lanjut. Untuk memilih metode gelasi internal atau eksternaltergantung pada kemudahan proses, murah secara ekonomi serta yang memberikan hasil terbaik.Pemilihan metode belum bisa diputuskan karena belum semua variabel proses dioptimasi. Penelitianmengenai pelapisan kernel UO2 menggunakan silikon karbida (SiC) maupun pirokarbon (PyC) barumerupakan tahap awal, sehingga masih diperlukan optimasi berbagai variabel prosesnya. Penelitianpembuatan kernel UO2 di BKTPB – BATAN Yogyakarta direncanakan untuk pembuatan inti elemen bakarbentuk bola untuk HTR (High Temperature Reactor) dan dikembangkan sebagai bahan awal prosespembuatan pelet (proses SGMP = Sol-Gel Microsphere Pelletization) untuk PHWR (Pressurized HeavyWater Reactor).
LABORATORY-SCALE PRODUCTION OF ADU GELS BY EXTERNAL GELATION FOR AN INTERMEDIATE HTGR NUCLEAR.The The aim of this research is to produce thousands of microsphere ADU (Ammonium Diuranate) gels by using external gelation for an intermediate HTGR (High Temperature Gas-cooled Reactor) nuclear fuel in laboratory-scale. Microsphere ADU gels were based on sol-solution which was made from a homogeneous mixture of ADUN (Acid Deficient Uranyl Nitrate) which was containing uranyl ion in high concentration, a water soluble organic compound PVA (Polyvinyl Alcohol) and THFA (Tetrahydrofurfuryl Alcohol). The simple unified home made laboratory experimental machine was developed to replace test tube experiment method which was once used due to a tiny amount of microsphere ADU gels produced. It consists of four main parts: tank filled sol-solution connecting to peristaltic pump and vibrating nozzle, preliminary gelation and gelation column. The machine has successfully converted 150 mL sol-solution into thousands of drops which produced 120 -130 drops in each minute in steady state in ammonia gas free sector. Preliminary gelation reaction was carried out in ammonia gas sector where drops react with ammonia gas in a bat an eye followed by gelation reaction in column containing ammonia solution 7 M. In ageing process, ADU gels were collected and submerged into a vessel containing ammonia solution which was shaken for 1 hour in a shaker device. Isopropyl alcohol (90%) solution was used to wash ADU gels and a digital camera was used to measured spherical form of ADU gels. Diameters in spherical spheroid form were found between 1.8 mm until 2.2 mm. The spherical purity of ADU gels were 10% -20% others were oblate, prolate spheroid and microsphere which have hugetiny of dimples on the surface.Keywords : ADUN, sol-solution, ADU-gels, gelation, spherical pheroid. ABSTRAK PRODUKSI GEL ADU SKALA LABORATORIUM DENGAN MENGGUNAKAN GELASI EKSTERNAL UNTUK BAHAN BAKAR ANTARA HTGR. Penelitian ini bertujuan untuk membuat ribuan gel bulat ADU
Simulasi Diameter Gel Basah Pada Fabrikasi Kernel Yttria-Stabilized Zirconia Menggunakan Alat Gel-Casting. Pada proses pembuatan kernel yttria-stabilized zirconia (YSZ), broth diteteskan melalui alat gel-casting untuk membentuk gel basah YSZ. Broth adalah umpan alat gel-casting yang berupa larutan terdiri dari zirconium (IV) nitrate, yttrium (III) nitrate hexahydrate, urea, tetrahydrofurfuryl alcohol (THFA), dan poly vinyl alcohol (PVA). Parameter proses alat gel-casting seperti frekuensi vibrasi dan kecepatan aliran broth diatur untuk memperoleh bentuk dan ukuran diameter gel basah yang diinginkan. Alat gel-casting yang berada di PTBBN BATAN memiliki satu buah nozzle dengan diameter 1 mm. Kegiatan simulasi ini perlu dilakukan untuk mengurangi jumlah eksperimen di laboratorium sehingga mengurangi volume limbah yang diakibatkan trial and error dalam eksperimen. Selain itu, simulasi ini bertujuan untuk memprediksi diameter gel basah yang dihasilkan. Oleh karena itu, simulasi diameter gel basah perlu dilakukan dan diverifikasi dengan hasil eksperimen. Berdasarkan hipotesa, simulasi diameter gel basah dapat dilakukan dengan memperhitungkan parameter alat gel-casting seperti kecepatan aliran broth dan frekuensi vibrasi. Selain itu karakteristik dari broth seperti densitas juga mempengaruhi diameter gel basah. Diameter gel basah yang dihasilkan alat gel-casting diukur menggunakan alat mikroskop digital. Diameter gel basah dari eksperimen didekati menggunakan persamaan yang dimodifikasi dengan memperhitungkan frekuensi vibrasi, kecepatan aliran broth, konsentrasi metal dalam broth dan densitas broth. Hasil simulasi menunjukkan penyimpangan yang lebih kecil dari simulasi menggunakan persamaan sederhana yang hanya memperhitungkan frekuensi vibrasi dan kecepatan aliran broth.Kata kunci: simulasi, diameter, gel basah, broth, alat gel-casting.
PENGARUH KONSENTRASI MEDIA NH4OH TERHADAP BENTUK FASE GEL DAN KARAKTERISASI SETELAHPEMANASAN. Telah dilakukan pembuatan butiran gel dengan variasi konsentrasi media NH4OH pada prosesgelasi. Variabel konsentrasi NH4OH adalah 2, 4, 6, 8 dan 10 N. Gel setelah kering dipanaskan pada suhu 100, 400,600 dan 800oC selama 3 jam. Karakterisasi gel diamati dengan mikroskop optik (MO) dan scanning electronmicroscope (SEM) untuk mengetahui bentuk dan strukturmikro permukaan. Dari hasil penelitian, menggunakanmedia NH4OH dengan konsentrasi ≥ 8 N terbentuk gel yang bulat dan setelah dipanaskan sampai 800oC tidakpecah. Hasil pengamatan MO dan SEM, menunjukkan bahwa morfologi bentuk dan permukaan gel yang telahdipanaskan pada suhu 100 sampai 800oC berbentuk bulat, permukaan homogen dan tidak pecah.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.