No abstract

To minimize electromagnetic (EM) pollution, two key parameters, namely, intrinsic wave impedance matching and intense absorption of incoming EM radiation, must satisfy the utmost requirements. To target these requirements, soft conducting composites consisting of binary blends of polycarbonate (PC) and poly(vinylidene fluoride) (PVDF) were designed with doped multiwalled carbon nanotubes (MWCNTs) and a three-dimensional cross-linked graphene oxide (GO) framework doped with ferrite nanoparticles. The doping of α-MnO onto the MWCNTs ensured intrinsic wave impedance matching in addition to providing conducting pathways, and the ferrite-doped cross-linked GO facilitated the enhanced attenuation of the incoming EM radiation. This unique combination of magnetodielectric coupling led to a very high electromagnetic shielding efficiency (SE) of -37 dB at 18 GHz, dominated by absorption-driven shielding. The promising results from the composites further motivated us to rationally stack individual composites into a multilayer architecture following an absorption-multiple reflection-absorption pathway. This resulted in an impressive SE of -57 dB for a thin shield of 0.9-mm thickness. Such a high SE indicates >99.999% attenuation of the incoming EM radiation, which, together with the improvement in structural properties, validates the potential of these materials in terms of applications in cost-effective and tunable solutions.

In order to obtain better materials, control over the precise location of nanoparticles is indispensable. It is shown here that ordered arrangements of nanoparticles, possessing different characteristics (electrical/magnetic dipoles), in the blend structure can result in excellent microwave absorption. This is manifested from a high reflection loss of ca. -67 dB for the best blend structure designed here. To attenuate electromagnetic radiation, the key parameters of high electrical conductivity and large dielectric/magnetic loss are targeted here by including a conductive material [multiwall carbon nanotubes, MWNTs], ferroelectric nanostructured material with associated relaxations in the GHz frequency [barium titanate, BT] and lossy ferromagnetic nanoparticles [nickel ferrite, NF]. In this study, bi-continuous structures were designed using 50/50 (by wt) blends of polycarbonate (PC) and polyvinylidene fluoride (PVDF). The MWNTs were modified using an electron acceptor molecule, a derivative of perylenediimide, which facilitates π-π stacking with the nanotubes and stimulates efficient charge transport in the blends. The nanoscopic materials have specific affinity towards the PVDF phase. Hence, by introducing surface-active groups, an ordered arrangement can be tailored. To accomplish this, both BT and NF were first hydroxylated followed by the introduction of amine-terminal groups on the surface. The latter facilitated nucleophilic substitution reactions with PC and resulted in their precise location. In this study, we have shown for the first time that by a compartmentalized approach, superior EM attenuation can be achieved. For instance, when the nanoparticles were localized exclusively in the PVDF phase or in both the phases, the minimum reflection losses were ca. -18 dB (for the MWNT/BT mixture) and -29 dB (for the MWNT/NF mixture), and the shielding occurred primarily through reflection. Interestingly, by adopting the compartmentalized approach wherein the lossy materials were in the PC phase and the conductive materials (MWNT) were in the PVDF phase, outstanding reflection losses of ca. -57 dB (for the BT and MWNT combination) and -67 dB (for the NF and MWNT combination) were noted and the shielding occurred primarily through absorption. Thus, the approach demonstrates that nanoscopic structuring in the blends can be achieved under macroscopic processing conditions and this strategy can further be explored to design microwave absorbers.

Conducting polymer composites containing ferromagnetic grafted-graphene derivatives are already appreciated for their lightweight, flexibility, and cost effectiveness in terms of microwave absorption. To further leverage the said properties of this wonder material, we propose a highly efficient replacement by blending conducting multiwall carbon nanotube (MWCNT) and FeCo anchored covalent cross-linked reduced graphene oxide (rGO) with poly(vinylidene fluoride) (PVDF). Interconnected conducting network of MWCNTs introduces higher electrical conductivity in the blend which is essential for microwave absorption. FeCo-anchored porous interconnected rGO framework was designed via solvent-mediated in situ coreduction in the presence of Fe(II) and Co(II) precursors. Resulting cross-linked-rGO/FeCo displays fascinating coexistence of ferromagnetism and conducting-dielectric behavior, while largely preserving the robust 3D porous interconnected structure. Coupled with conducting MWCNTs, diamine cross-linked rGO/FeCo in a soft polymer matrix yields remarkably high total shielding effectiveness (SE) of -41.2 dB at 12 GHz, for a meager 10 wt % filler content. In addition, the composite materials display efficient heat dissipation abilities in conjunction with the trend in their thermal conductivities. This new-age microwave-absorbing material, powered by multifunctionality and tunable magnetodielectric properties, henceforth offers an amendable, cost-effective replacement to the existing solutions.

Highly conducting composites were derived by selectively localizing multiwall carbon nanotubes (MWNTs) in co-continuous PVDF/ABS (50/50, wt/wt) blends.