An earthquake doublet (Mw 7.8 and Mw 7.6) occurred on the East Anatolian Fault Zone (EAFZ) on February 6th, 2023. The events produced significant ground motions and caused major impacts to life and infrastructure throughout SE Türkiye and NW Syria. Here we show the results of earthquake relocations of the first 11 days of aftershocks and rupture models for both events inferred from the kinematic inversion of HR-GNSS and strong motion data considering a multi-fault, 3D geometry. We find that the first event nucleated on a previously unmapped fault before transitioning to the East Anatolian Fault (EAF) rupturing for ~350 km and that the second event ruptured the Sürgü fault for ~160 km. Maximum rupture speeds were estimated to be 3.2 km/s for the Mw 7.8 event. For the Mw 7.6 earthquake, we find super-shear rupture at 4.8 km/s westward but sub-shear eastward rupture at 2.8 km/s. Peak slip for both events were as large as ~8m and ~6m, respectively.

Summary Here we present the results of a kinematic slip model of the 2020 Mw 6.7 Doğanyol-Sivrice, Turkey Earthquake, the most important event in the last 50 years on the East Anatolian Fault zone. Our slip model is constrained by two Sentinel-1 interferograms and by 5 three-component high-rate GNSS recordings close to the earthquake source. We find that most of the slip occurs predominantly in three regions, two of them at between 2 and 10 km depth and a deeper slip region extending down to 20 km depth. We also relocate the first two weeks of aftershocks and find a distribution of events that agrees with these slip features. The HR-GNSS recordings suggest a predominantly unilateral rupture with the effects of a directivity pulse clearly seen in the waveforms and in the measure peak ground velocities. The slip model supports rupture propagation from northeast to southwest at a relatively slow speed of 2.2 km/s and a total source duration of ∼20 s. In the absence of near-source seismic stations, space geodetic data provide the best constraint on the spatial distribution of slip and on its time evolution.

No abstract

The Parnitha mountain range lies between two Quaternary rift systems in central Greece: the Gulf of Corinth Rift and the Gulf of Evia rift. We suggest that the range was formed by footwall uplift on active normal faults striking WNW–ESE and NE–SW. We investigated the scarp appearance, geometry and slip rates of three normal faults bounding this mountain range by field mapping at 1:5000 scale. Active faults studied include the 8.5 km long Fili Fault, the 4.7 km long Maliza Fault and the 4 km long Thrakomakedones Fault. We calculated comparable mean slip rates for all mapped faults (Fili: 0.18 mm/yr, Avlon: 0.2 mm/yr, Thrakomakedones: 0.24 mm/yr); however, we suggest that the WNW–ESE structures are more active during the Late Quaternary because of abundant field evidence of recent movements along slip surfaces (fresh basal stripes and slickenlines). In addition, stress axes analysis shows a N7°E–N25°E (NNE–SSW) oriented, extensional stress field, which is compatible with the focal mechanism of the Athens 1999 earthquake. The fault-slip data from the Parnitha faults show orientations similar to other low-strain areas in central Greece, such as the Gulf of Evia Rift to the north. Our slip rate estimates may explain the low recurrence of large earthquakes in Attica as opposed to high slip rate areas in central Greece such as the neighbouring Gulf of Corinth

No abstract

Here we present a joint analysis of the geodetic, seismological and geological data of the March 2021 Northern Thessaly seismic sequence, that were gathered and processed as of April 30, 2021. First, we relocated seismicity data from regional and local networks and inferred the dip-direction (NE) and dip-angle (38°) of the March 3, 2021 rupture plane. Furthermore, we used ascending and descending SAR images acquired by the Sentinel-1 satellites to map the co-seismic displacement field. Our results indicate that the March 3, 2021 Mw=6.3 rupture occurred on a NE-dipping, 39° normal fault located between the villages Zarko (Trikala) and Damasi (Larissa). The event of March 4, 2021 occurred northwest of Damasi, along a fault oriented WNW-ESE and produced less deformation than the event of the previous day. The third event occurred on March 12, 2021 along a south-dipping normal fault. We computed 22 focal mechanisms of aftershocks with M≥4.0 using P-wave first motion polarities. Nearly all focal mechanisms exhibit normal kinematics or have a dominant normal dip-slip component. The use of InSAR was crucial to differentiate the ground deformation between the ruptures. The majority of deformation occurs in the vertical component, with a maximum of 0.39 m of subsidence over the Mw=6.3 rupture plane, south and west of Damasi. A total amount of 0.3 m horizontal displacement (E-W) was measured. We also used GNSS data (at 30-s sampling interval) from twelve permanent stations near the epicentres to obtain 3D seismic offsets of station positions. Only the first event produces significant displacement at the GNSS stations (as predicted by the fault models, themselves very well constrained by InSAR). We calculated several post-seismic interferograms, yet we have observed that there is almost no post-seismic deformation, except in the footwall area (Zarkos mountain). This post-seismic deformation is below the 7 mm level (quarter of a fringe) in the near field and below the 1 mm level at the GNSS sites. The cascading activation of the three events in a SE to NW direction points to a pattern of domino-style earthquakes, along neighbouring fault segments. The kinematics of the ruptures point to a counter-clockwise change in the extension direction of the upper crust (from NE-SW near Damasi to N-S towards northwest, near Verdikoussa).

Knowledge and visualization of the present-day relationship between earthquakes, active tectonics and crustal deformation is a key to understanding geodynamic processes, and is also essential for risk mitigation and the management of geo-reservoirs for energy and waste. The study of the complexity of the Greek tectonics has been the subject of intense efforts of our working group, employing multidisciplinary methodologies that include detailed geological mapping, geophysical and seismological data processing using innovative methods and geodetic data processing, involved in surveying at various scales. The data and results from these studies are merged with existing or updated datasets to compose the new Seismotectonic Atlas of Greece. The main objective of the Atlas is to harmonize and integrate the most recent seismological, geological, tectonic, geophysical and geodetic data in an interactive, online GIS environment. To demonstrate the wealth of information available in the end product, herein, we present thematic layers of important seismotectonic and geophysical content, which facilitates the comprehensive visualization and first order insight into seismic and other risks of the Greek territories. The future prospect of the Atlas is the incorporation of tools and algorithms for joint analysis and appraisal of these datasets, so as to enable rapid seismotectonic analysis and scenario-based seismic risk assessment.

Summary On 29 December 2020, a shallow earthquake of magnitude Mw 6.4 struck northern Croatia, near the town of Petrinja, more than 24 hours after a strong foreshock (Ml 5). We formed a reconnaissance team of European geologists and engineers, from Croatia, Slovenia, France, Italy and Greece, rapidly deployed in the field to map the evidence of coseismic environmental effects. In the epicentral area, we recognized surface deformation, such as tectonic breaks along the earthquake source at the surface, liquefaction features (scattered in the fluvial plains of Kupa, Glina and Sava rivers), and slope failures, both caused by strong motion. Thanks to this concerted, collective and meticulous work, we were able to document and map a clear and unambiguous coseismic surface rupture associated with the main shock. The surface rupture appears discontinuous, consisting of multi-kilometer en échelon right stepping sections, along a NW-SE striking fault that we call the Petrinja-Pokupsko Fault (PPKF). The observed deformation features, in terms of kinematics and trace alignments, are consistent with slip on a right lateral fault, in agreement with the focal solution of the main shock. We found mole tracks, displacement on faults affecting natural features (e. g. drainage channels), scarplets, and more frequently breaks of anthropogenic markers (roads, fences). The surface rupture is observed over a length of ∼13 km from end-to-end, with a maximum displacement of 38 cm, and an average displacement of ∼10 cm. Moreover, the liquefaction extends over an area of nearly 600 km² around the epicenter. Typology of liquefaction features include sand blows, lateral spreading phenomenon along the road and river embankments, as well as sand ejecta of different grain size and matrix. Development of large and long fissures along the fluvial landforms, current or ancient, with massive ejections of sediments is pervasive. These features are sometimes accompanied by small horizontal displacements. Finally, the environmental effects of the earthquake appear to be reasonably consistent with the usual scaling relationships, in particular the surface faulting. This rupture of the ground occurred on or near traces of a fault that shows clear evidence of Quaternary activity. Further and detailed studies will be carried out to characterize this source and related faults in terms of future large earthquakes potential, for their integration into seismic hazard models.