Cu2Sn x Ge1–x S3 (CTGS) particles were synthesized via a solid-state reaction and assessed, for the first time, as both photocatalysts and photocathode materials for hydrogen evolution from water. Variations in the crystal and electronic structure with the Sn/Ge ratio were examined experimentally and theoretically. The incorporation of Ge was found to negatively shift the conduction band minimum, such that the bandgap energy could be tuned over the range 0.77–1.49 eV, and also increased the driving force for the photoexcited electrons involved in hydrogen evolution. The effects of the Sn/Ge ratio and of Cu deficiency on the photoelectrochemical performance of Cu2Sn x Ge1–x S3 and Cu y Sn0.38Ge0.62S3 (1.86 < y < 2.1) based photocathodes were evaluated under simulated sunlight. Both variations in the band-edge position and the presence of a secondary impurity phase affected the performance, such that a particulate Cu1.9Sn0.38Ge0.62S3 photocathode was the highest performing specimen. This cathode gave a half-cell solar-to-hydrogen energy conversion efficiency of 0.56% at 0.18 V vs a reversible hydrogen electrode (RHE) and an incident-photon-to-current conversion efficiency of 18% in response to 550 nm monochromatic light at 0 VRHE. More importantly, these CTGS particles also demonstrated significant photocatalytic activity during hydrogen evolution and were responsive to radiation up to 1500 nm, representing infrared light. The chemical stability, lack of toxicity, and high activity during hydrogen evolution of the present CTGS particles suggest that they may be potential alternatives to visible/infrared light responsive Cu–chalcogenide photocatalysts and photocathode materials such as Cu(In,Ga)(S,Se)2 and Cu2ZnSnS4.
Ball milling has been shown empirically to produce fine photocatalytic particles from large bulky particles but to drastically reduce the photocatalytic activity of such material during water splitting due to mechanical damage to the photocatalyst surfaces. If the damaged photocatalyst surfaces could be removed or reconstructed, the reduced particle sizes resulting from milling would be expected to provide enhanced photocatalytic activity. In the present study, fine particles of crystalline Cu2Sn0.38Ge0.62S3 (CTGS), which is responsive to long wavelength light up to the near-infrared region, were synthesized by a flux method and subsequent ball milling. A photocathode made of such particles showed significantly enhanced photoelectrochemical (PEC) performance under simulated sunlight while the photocatalytic hydrogen evolution activity of a powder suspension system made from the same material exhibited a typical decrease. The CTGS crystalline particles synthesized using the flux method were found to be highly crystalline but to have relatively large micrometer-scale sizes. Ball milling reduced the particle size but produced an amorphous coating of oxidized species that lowered the photocatalytic activity of the powder suspension system. Typical surface modifications of a photocathode made from this material, consisting of wet chemical processes, also served as an etching treatment to successfully remove the minimally crystalline surface layer and provide greater PEC activity. These data suggest the benefits of combining flux crystal growth with ball milling and the appropriate chemical etching process to obtain high-crystallinity fine photocatalytic particles responsive to long wavelength light with improved PEC hydrogen evolution activity.
The photoelectrochemical (PEC) properties of particulate CuGaSe2 (CGSe) and CuIn0.7Ga0.3Se2 (CIGS) photocathodes were evaluated in an acetonitrile electrolyte containing iron(III) acetylacetonate (Fe(acac)3) under simulated sunlight illumination, and compared to that in a typical aqueous electrolyte. The particulate CGSe and CIGS photocathodes can generate higher photovoltages, which is a more positive onset potential than the hydrogen evolution in an aqueous electrolyte possibly due to the facile one-electron reduction of Fe(acac)3, while the cathodic photocurrent decreased due to light shielding by the colored nonaqueous electrolyte. Indeed, the incident-photon-to-current conversion efficiencies (IPCEs) of the photocathode evidently decreased in the wavelength region of 400–600 nm, where the Fe(acac)3 acetonitrile electrolyte shows an intense light absorption. The CIGS photocathode generates a higher cathodic photocurrent than the CGSe during hydrogen evolution from the aqueous electrolyte, while the CGSe exhibits superior PEC performances to CIGS in the nonaqueous electrolyte, which can be explained by the energy level of the conduction band minimum (CBM) of CGSe and CIGS compared to the reduction potential for Fe(acac)3. Finally, the two-electrode PEC-voltaic (PECV) cell consisting of the CGSe photocathode and Pt anode demonstrated a stable generated photovoltage by a one-step photoexcitation process.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.